Construction of compound wall, installation of main gate and necessary renovation of balance work of field staff quarters opposite Jammu University.

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement motar

Labour engaged for removing of mulba, rubbish

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level.

1:3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20MM nominal size) crushed.

1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) crushed

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc ( not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sites and ramming of bottoms lift upto 1.5M, including getting out excavated earth and disposal of surplus excavated earth as directed 1 meter from cutting edge

Repair to plaster of thickness 12MM to 20MM in patches of area 2.5 Sqm & under including cutting the patch in proper shape raking out joints & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50M lead with cement mortar 1:4 (1 cement : 4 coarse sand)

12mm cement plaster of mix 1:4 ( 1 cement : 4 coarse sand )

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved mahe laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarsesand) including pointing the joints with white cement and matching pigment etc., complete.in colour such as white, ivory, greay, fume red brown

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment..

Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate : 10mmand down gauge ) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.

Finishing walls with water proofing cement paint of required shade. New work ( two or more coats ) applied @3.84Kg/10sqm

Providing and fixing electric fitting fans, exaust fans , wiring and service line complete job

Provision for sanitary fitting including taps, scal, sink, cistirns, wash basins, mirrors, water tank 500L on top of floor with necessary fittings with manhole complete job

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Makrana White Second quality 16mm

Provision for fabricated stairs welded with 25mm dia GI pipe including priming and painting for foor complete job

Renewing glass panes and refixing existing wooden fillets. Float glass panes of thickness 4.0MM (weight not less than 10Kg per Sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Centering and shuttering including strutting propping etc and removal of form for :

Wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings balconies and access platform

Carriage of material by Mechanical transport from source to site of work including loading unloading and stacking

Sand and agg average distance 20 Km

Agg below 40mm nominal size average distance 10 Km

Brick average diatnce 20 Km

Shri Bharat Bhushan Gupta

Ashok Kumar