NIT NO 166

Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work).

Up to 300 mm Diameter

Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Manually Operated Resilient Seated Sluice Valves of Class PN 1.6

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.: All kinds of soil

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:

Ordinary rock

M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

ἄ儀 伀ἅ吀 䈀潆⁲潣湮捥楴湯眠瑩⁨〲洠楤⁡䑍䕐倯剐䌭瀠灩⁥敬杮桴甠⁰潴〠‵瑭⹲·䄀摤攠瑸慲漠敶⁲瑩浥渠⸱ㄲ‬⸱㈲☠ㄠ㈮″潦⁲牰癯摩湩⁧㈠‰浭倠⁅㠠‰乐ㄠ‶獡瀠牥䤠体㐠㈴‷䑍䕐瀠灩⁥湩汣摵湩⁧硥慣慶楴湯‬牰癯摩湩Ⱨ氠祡湩⁧…潪湩楴杮漠⁦敳癲捩⁥楬敮愠潢敶㔠〮‰瑭⹲刀呍䬀ѧ慅档䌀䵕攀捡ͨ瑭⩲ࠂ畓灰祬☠䤠獮慴汬瑡潩景㌠瀠慨敳䤠䥓洠牡敫⁤畳浢牥楳汢⁥潭潴⁲異灭猠瑥漠⁦琠牨敥猠慴⁲牯戠瑥整⁲慲楴杮漠⁦䕂⁅愠摮愠⁳数⁲卉›〸㐳㈭㄰‸瀨浵⥰愠摮䤠⁓㈹㌸㈭㄰″洨瑯牯 牯愠⁳浡湥敤⁤灵琠慤整漠⁦灡牰癯摥洠歡⁥景映汯潬楷杮搠瑵⁹潣摮瑩潩楷桴爠煥極敲⁤捡散獳牯敩⁳湩汣摵湩⁧慭楫杮挠湯敮瑣潩畳瑩扡敬映牯琠扵⁥敷汬䐯䉃‮桔⁥潪⁢湩汣摵獥氠睯牥湩⁧景洠瑯牯瀠浵Ɒ椠獮慴汬瑡潩景挠浯汰瑥⁥楦瑴湩⁧…捡散獳牯敩ⱳ樠楯瑮湩⁧景攠敬瑣楲慣慣汢獥甠⁰潴猠楷捴⁨潢牡Ɽ琠獥楴杮漠⁦畳浢牥楳汢⁥異灭猠瑥愠摮椠瑮牥潣湮捥楴湯甠⁰潴眠瑡牥洠楡獮‬潣灭敬整椠污敲灳捥⹴ % ⸷‵坋⠠〱䠠⥐☠栠慥⁤扡癯⁥㈱‰瑭⹲т̉匀甀瀀瀀氀礀 愀渀搀 䘀椀砀椀渀最 漀昀 攀氀攀挀琀爀椀挀 挀漀渀琀爀漀氀 昀攀攀搀攀爀 瀀愀渀攀氀 挀漀洀瀀爀椀猀椀渀最 漀昀 猀甀椀琀愀戀氀攀 爀愀琀椀渀最 䴀䌀䌀䈀 Ⰰ 昀甀氀氀礀 愀甀琀漀洀愀琀椀挀 猀琀愀爀ⴀ搀攀氀琀愀 猀琀愀爀琀攀爀Ⰰ 漀瘀攀爀 氀漀愀搀 爀攀氀愀礀Ⰰ 愀洀瀀攀爀攀 洀攀琀攀爀 眀椀琀栀 䌀吀猀Ⰰ 瘀漀氀琀 洀攀琀攀爀Ⰰ 瀀栀愀猀攀 瀀爀攀瘀攀渀琀攀爀Ⰰ 猀甀椀琀愀戀氀攀 猀琀愀爀琀椀渀最 挀愀瀀愀挀椀琀漀爀猀Ⰰ 瀀栀愀猀攀 椀渀搀椀挀愀琀漀爀猀Ⰰ 氀椀最栀琀椀渀最 愀爀爀愀渀最攀洀攀渀琀 攀琀挀⸀ 挀漀洀瀀氀攀琀攀 猀甀椀琀愀戀氀攀 昀漀爀 琀栀爀攀攀 瀀栀愀猀攀 瀀甀洀瀀 猀攀琀⸀ 吀栀攀 瀀愀渀攀氀 猀栀漀甀氀搀 栀愀瘀攀 猀瀀愀挀攀 昀漀爀 攀渀攀爀最礀 洀攀琀攀爀 ⠀ 猀甀瀀瀀氀椀攀搀 戀礀 䐀䤀匀䌀伀䴀⤀⸀ 䄀氀氀 琀栀攀猀攀 攀焀甀椀瀀洀攀渀琀猀 猀栀愀氀氀 戀攀 栀漀甀猀攀搀 戀礀 瀀愀渀攀氀 戀漀砀 洀愀搀攀 漀甀琀 昀爀漀洀 ㄀㠀 最愀甀最攀 䴀⸀匀⸀ 匀栀攀攀琀 眀椀琀栀 瀀漀眀搀攀爀 挀漀愀琀椀渀最⸀ 倀愀渀攀氀 猀栀漀甀氀搀 戀攀 漀昀 洀椀渀椀洀甀洀 猀椀稀攀 㤀 砀 㘀 砀 㐀㔀 洀洀 眀椀琀栀 匀琀愀渀搀

Please Enable Macros to View BoQ information