Construction of New Fire and Rescue Service Station building with development works at Coonoor in the Nilgiris District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6: Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coat (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

53.3 : C.I. Steps ( 5 kg)

55.2 : Flat Back Urinal

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112. : S&F of 300 mm dia sweep AC exhaust fan

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel (including tax collected by the Govt.per Cum)

2.1.3 : Filling crushed stone sand

2.1.4 :Supplying and Filling with stone dust

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

14.1.1.I : Precast Cupboard slab 20mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

16.1.1 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

f.Curved surface

g.Double centering portico area

21.5.1.1 : Supplying and fixing of following size solid core flush door shutter of thickness 35mm a) door Size 1000 mm X 2100 mm (Single leaf)

b) door Size 1200 mm X 2100 mm (Single leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) (using crushed stone sand) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 :Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.5.1 :Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.1 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5. :PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using Chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1. Supplying and fixing of Three Phase ELCB

98.3.2. : TW double leaf panelled door shutter (with brass fittings) a. 1800mm x 2400mm.

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1.2: Supply & laying stain free nano polish virtifed tile flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc.,

367: Providing wooden Melamine polish for new wood work

448.2: Providing PVC Tee with end cap

ANNEXURE - II A1:Supplying and fixing of PVC Trims

A2: Providing one coat of Wallputty for new plastered surface

A3:UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.

A4: UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.

A5:Supply & Fixing of Qute WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.

A6: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.

A7: Supply and delivery of CP two way bib cock with health faucet

A8: Supply and fixing of 9 watts LED bulb

A9:Supply and fixing of 4' 18 watts LED Tube Light

A10: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A11:Supplying and fixing of 25W LED street light fittings etc.,

A12:Supply and fixing of 12 watts LED bulb

A13: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

A14: Supplying and delivery of Single Pole 6A to 32A, 10KAMINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS

A15: Labour charges for laying of LTUG cable above Ground Level including cost of material, labour charges etc., all complete and as directed by the departmental officers.

A16: Labour charges for laying of LTUG cable below Ground Level including cost of material, labour charges etc., all complete and as directed by the departmental officers.

A17: Supply & fixing of cable gland suitable for following PVC armoured LTUG cable etc., complete a.) Cable gland suitable for 3.5X 50 Sqmm UG Cable

A18: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No. 40A DP MCB Isolator as incoming and 6 Nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only.

A19: Supplying and fixing 3 Nos 100Amps 500 volts grase/ well porcelin fuse unit on suitable teak wood plank to be fixed on the top of the EB poles with necessary clamps and including cost of materials etc

A20: Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

A21: Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with required accessories. A) 50 liters capacity

A22: Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

A23: Supplying and fixing of the following dia of the GI, GM & UPVC specials a) 65mm dia GI Bend

b) 65mm dia GI Elbow

c) 65mm dia GI Coupling

A24: Supply and delivery of following GI pipes `B` class of best approved quality,with ISI mark including cost material and cost of conveyence to site etc., a) 65mm dia GI pipe

A25 : Supplying and delivery of the following dia of the MS clamp set a) 65mm dia

A26: Supply and laying of 3.5 x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

D KESAVAN (BID ID -1480166)