Construction of Office cum Training Building, Granary Hall and renovation of old boundary wall of Andi Silk Farm, Begusarai

INFRASTURUCTURE DEVELOPMENT AUTHORITY First Floor, Udyog Bhawan, East of Gandhi Maidan, Patna

TECHNICAL BID SHEET

TENDER NUMBER 06/TEN/IDA/26 DATE OF ISSUE OF TENDER 09.03.2026

NAME OF WORK अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन, ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य COST OF WORK AS PER BOQ Rs. 1,41,43,060.00

BID SECURITY (EARNEST MONEY DEPOSIT) AMOUNT Rs. 2,83,000.00 COMPLETION PERIOD IN MONTHS 6.0

NAME OF TENDERER ALL COLOURED CELL IS TO BE FILLED ACCORDINGLY

ADDRESS, E-MAIL & MOBILE NUMBER OF TENDERER

S.N. ITEMS REQUIREMENT REMARKS

1 REGISTRATION (Any Contractor Registered in appropriate category with Central Government / Any State Government / Any Public Sector Undertakings or an Agency of National or International repute may tender but Registration with Infrastructure Development Authority will be essential after issue of Letter Of Acceptance.) Department

Registration No.

Date of Validity

2 ELECTRICAL LICENSE REGISTRATION Attach Valid Self Electrical License Or Sub Contractor's Electrical License With Affidavit (Attach An Affidavit As Per Format Prescribed In F2-Annexure I on Or After Date Of Tender, Duly Attested By An Executive Magistrate). Department

Registration No.

Date of Validity

3 LEGAL STATUS OF BIDDER (i) Individual/Partnership/Pvt. Ltd./Public Ltd/Joint Venture

(ii) Place of Registration.

(iii) Principal Place of Business

(iv) Power of Attorney of Signatory Bid

4 PERMANENT ACCOUNT NUMBER (PAN) Attach Copy of PAN

5 GST REGISTRATION Attach Copy of GST

6 COST OF BOQ (e payment only) Rs. 11,800.00 (Attach e-payment receipt of BOQ)

7 EARNEST MONEY DEPOSIT (BID SECURITY) Earnest Money Deposit (Bid Security) will be accepted only in online mode (Internet Payment Gateway). No other forms of Earnest Money Deposit (Bid Security) will be accepted. Amount To Be Entered (Rs. In Lakhs) Attach e-payment of Earnest Money Deposit (Bid Security).

8 WORK EXPERIENCE OF SIMILAR NATURE Satisfactory completed at least one similar nature work of value not less than 50% of work in the last 5 years. The completion certificate shall be issued by employer not below the rank of Executive Engineer or Equivalent.

9 ANNUAL FINANCIAL TURN OVER OF LAST FIVE YEARS (50% of the project cost in any one financial year during the last five financial years) (Attach Balance Sheet, Profit & Loss And Audit Report Duly Audited By CA) FY 2020-2021 Amount To be entered (Rs in Lakhs)

FY 2021-2022 Amount To be entered (Rs in Lakhs)

FY 2022-2023 Amount To be entered (Rs in Lakhs)

FY 2023-2024 Amount To be entered (Rs in Lakhs)

FY 2024-2025 Amount To be entered (Rs in Lakhs)

10 BANKER'S CERTIFICATE EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES (10% OF PROJECT COST) As Per Format Prescribed In Annexure-III Of F2 Certificate Issued By Bank As Per Format Prescribed In Annexure-III Of F2, On Or After Date Of Tender

11 BIDDING CAPACITY (BC=A*N*2-B) A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited. B = Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next 06 Months (Period of completion of the construction works for which bids are invited).

12 (A) AMOUNT OF EXISTING COMMITMENTS AND ONGOING WORKS Attach As Per Annexure-IV Of F2, On Or After Date Of Tender (Bidder must decleare themselve their all exising commitment concealment of any fact shall be sufficient cause for rejection)

(B) AMOUNT OF WORK FOR WHICH BID ALREADY SUBMITTED Attach As Per Annexure-V Of F2, On Or After Date Of Tender

13 AFFIDAVIT Attach An Affidavit As Per Format Prescribed In NIT, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

14 CHARACTER CERTIFICATE Attach a Valid Character Certificate of Tenderer Issued By Competent Authority.

15 UNDERTAKING (i) Investment of minimum cash up to 25% of the value of the work during implementation of the contract. Annexure-VI Of F2. (I) Attach An Undertaking As Per Format Prescribed In Annexure-VI Of F2.

(ii)Bid Validity : 120 days Attach As Per Format Prescribed In F2-Annexure II on Or After Date Of Tender

16 LITIGATION HISTORY Annexure-VII of F2 Attach Affidavit As Per Format Prescribed In Annexure-VII of F2 On Or After Date Of Tender.

17 PROPOSED METHODOLOGY AND PROGRAMME OF CONSTRUCTION Attach Descriptions, Drawings And Charts As Necessary.

18 TECHNICAL PERSONNEL Site Engineer(Civil) - 1 no. (B.Tech(Civil) Holder having minimum 2yrs. of experience or Diploma (Civil) holder having minimum 5yrs. of experience Site Engineer(Electrical) - 1 no. (B.Tech(Electrical) Holder having minimum 2yrs. of experience or Diploma (ELectricall) holder having minimum 5yrs. of experience Attach Necessary Certificate And Current Affidavit Of Both Employee And Employer On And After Date Of Tender, Duly Attested By An Executive Magistrate.

19 LIST OF KEY PLANTS & EQUIPMENTS i. MS Shuttering Plate - 1000sqft ii. Vibrator - 2 nos. iii. Water Tanker - 1 no. Iv. Concrete Mixture Machine - 1 no. Attach Owned Voucher/Cash Memo/Invoice And Affidavit In Case Of Leased/Hire On And After Date Of Tender, Duly Attested By An Executive Magistrate.

I, the undersigned, do hereby certify that all the statements made in the required attachements are true and correct.

INFRASTRUCTURE DEVELOPMENT AUTHORITY

(A GOVERNMENT OF BIHAR UNDERTAKING)

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Whatsapp Enabled Mobile Number

NIT - 06/TEN/IDA/26

Sl no. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 14,143,060.00

TOTAL AMOUNT Rs. 14,143,060.00

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

S.No. Particular Amount

1 Schedule Items 14,143,060.00

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

S. No. SOR 2022 Code Ref. Item of Work Unit Rate Quantity Amount

Abstract of cost for Office-cum-Training center (Traisum Building)

Rate Based on BCD SOR-2022

1 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All kinds of soil Cum 314.90 57.31 18046.92

2 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 123.90 39.59 4905.20

3 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 49.40 20.00 988.00

4 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 287.30 110.00 31603.00

5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

4.1.3 1:2:4 (1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) cum 3998.10 25.16 100592.20

6 4.17 Making plinth protection 50mm thick of cement concrete1:3:6 (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Sqm 436.60 40.00 17464.00

7 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete

5.33A.1 All work up to plinth level cum 4756.90 22.00 104651.80

5.33A.2 All work from plinth level upto floor V level

5.33A.2.1 Walls columns, pillars, posts cind struts cum 5293.50 4.50 23820.75

5.33A.2.2 Beams, plinth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 5677.20 25.55 145052.46

8 5.33B Add for using extra cement in the items of design mix over and above the specified cement content therein.

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 164.50 52.05 8562.23

9 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 211.60 73.45 15542.02

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 437.50 120.00 52500.00

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 55.00 22258.50

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 85.00 42024.00

5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 439.90 20.00 8798.00

10 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 1650.00 155925.00

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 1475.00 136585.00

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1850.00 167980.00

11 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 60.00 289194.00

12 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 48.00 40425.60

13 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse sand) sqm 599.30 35.50 21275.15

14 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 89.70 35.50 3184.35

15 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry sqm 113.60 35.50 4032.80

16 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

17 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2578.00 16.00 41248.00

18 9.53 providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) each 130.80 48.00 6278.40

19 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 161.10 350.00 56385.00

20 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. each 979.50 2.00 1959.00

21 9.96 Providing and fixing aluminium sliding door bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:

22 9.97 Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

23 9.100 Providing and fixing aluminium handles anodised ISI Marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

24 9.101 Providing and fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 60.80 4.00 243.20

25 9.103 Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Each 655.40 2.00 1310.80

26 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 447.20 150.00 67080.00

27 21.3 Providing and fixng glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With glass panes of 5.50 mm thickness (weight not less thar 12.50 kg/sqm) Sqm 1115.10 12.00 13381.20

28 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. sqm 6303.40 5.00 31517.00

29 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 165.40 5.00 827.00

30 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, Kg 114.60 550.00 63030.00

31 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

32 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

33 11.38 Providing and laying Ceramic glazed floor tiles 300x300mm Anti Skid (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete. sqm 862.40 15.00 12936.00

34 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 795.00 55.00 43725.00

35 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 283.30 128.00 36262.40

36 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. Each 189.40 6.00 1136.40

37 13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 141.50 325.00 45987.50

38 13.12 15mm cement plaster on the rough side of single or half brick wall of mix:

39 13.24 6mm cement plaster to ceiling of mix:

13.24.2 1:4( 1 cement: 4 coarse sand) sqm 125.60 85.00 10676.00

40 13.26 Neat cement punning Sqm. 40.50 56.61 2292.71

41 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) SQM 137.00 180.00 24660.00

42 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. sqm 117.30 410.00 48093.00

43 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.40 590.00 62186.00

44 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 590.00 22774.00

45 13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 39.70 93.00 3692.10

46 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 116.50 80.00 9320.00

47 13.101 French spirit polishing:

13.101.1 Two or more coats on works including a coat of wood filler. sqm 215.80 93.00 20069.40

48 22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cum 3990.30 10.00 39903.00

49 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

50 Carriage of Materials

B Coarse sand Cum 1427.28 36.42 51981.50

C Stone chips Cum 1772.17 66.22 117352.77

D Local Sand Cum 248.86 110.00 27374.60

Difference of Cost

TOTAL CIVIL AMOUNT (RS.) 2,634,728.22

Total Amount (Rs.) 2,634,728.22

Add extra GST @5.36% (for implementation of 12% to 18% GST) 141,221.43

Grand Total Amount (Rs.) 2,775,949.65

51 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia Pipes metre 278.20 25.00 6955.00

18.8.2 20 mm nominal outer dia Pipes metre 350.80 20.00 7016.00

18.8.3 25 mm nominal outer dia Pipes metre 463.10 15.00 6946.50

18.8.4 32 mm nominal outer dia Pipes metre 549.80 15.00 8247.00

52 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge

18.9.1 15 mm nominal outer dia Pipes metre 151.40 25.00 3785.00

18.9.2 20 mm nominal outer dia Pipes metre 205.30 20.00 4106.00

18.9.3 25 mm nominal outer dia Pipes metre 294.70 15.00 4420.50

18.9.4 32 mm nominal outer dia Pipes metre 359.10 15.00 5386.50

53 18.16 Providing and fixing brass stop cock of approved quality

18.16.1 15 mm Nominal bore each 303.80 4.00 1215.20

18.16.2 20 mm Nominal bore each 328.00 4.00 1312.00

54 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality.

18.17.2 32 mm Nominal bore Each. 589.90 1.00 589.90

55 18.19 Providing and fixing metal non-return valve of approved quality.

18.19.2 32 mm nominal bore

18.19.2.1 Horizontal Each. 677.60 1.00 677.60

56 18.48 Providing and placing on terrace (at all floor levels ) polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per lit. 9.70 1000.00 9700.00

C.P. BRASS FITTINGS

57 18.49 Providing and fixing C.P. brass bib cock of Approved quality conforming to IS:8931 : Each 434.20 6.00 2605.20

58 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS;8931

18.53.1 15 mm Nominal bore Each 500.40 6.00 3002.40

59 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Each 61.70 6.00 370.20

SANITARY INSTALLATION

60 17.1 Providing and fixing water closet squatting pan(indian type WC pan)with 100mm sand cast iron P or S trap, 10 litre low fixture complete , including ctting and making good the walls and level white PVC flushing cistern,including flush pipe with manuall controlled device(handle leer) cofirming to IS 7231, with all fittings and floors wherever required

17.1.1 white vitreous china Orissa pattern WC pan of size 580X440mm with integral type foot rests Each 4470.90 2.00 8941.80

61 17.2 Providing and fixing white vitreous china pedestal type-water closet (European type WC pan) with seat & lid, 10 litre low level white PVC flushing cisternincluding flush pipe,with manually controlled device(handle leaver) confirming to IS:7231 with all fittings and fixture complete , including cutting and making good the wall and floors wherever required

17.2.1 WC pan with ISI marked white solid plastic seat and lid Each 4230.00 1.00 4230.00

62 17.7 Provding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, , 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the .wall wherever required.

17.7.4 White vitreous china flat back wash basin size 550X400mm with a single15mm CP brass pillar tap Each 2135.80 2.00 4271.60

63 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

64 17.31 Provding and fixing 600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers complete. Each 1068.50 2.00 2137.00

RAIN WATER PIPE

65 12.78 Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

66 12.79 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.79.1 Coupler

12.79.6 Shoe (Plain)

67 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

EXTERNAL PHE WORKS

68 19.7 Constructing brick masonary manhole in cement mortar 1:4 (1 cement, 4 coarse sand.) R.C.C. top slab with1:2:4 mix(1 cement, 2 coars e sand, 4 graded stone aggregate 20 mm nominal size) foundation cocrete 1:4:8 mix (1cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size.) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand.) finished with floating coat of neat cement and making channels in cement concrete 1:2:4. finished with floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension tatal weight of cover and fram to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

19.7.1.1 With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5 Each 7914.70 5.00 39573.50

69 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5 Each 33603.40 1.00 33603.40

70 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

71 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.2 150 mm nominal size dia Mtrs. 660.10 60.00 39606.00

72 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.2 150 mm nominal size dia Metre 673.50 30.00 20205.00

73 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cum 1343.20 5.00 6716.00

74 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 916.80 16.00 14668.80

75 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

76 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

77 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

PHE AMOUNT (RS.) 320,910.00

Total Amount (Rs.) 320,910.00

Add extra GST @5.36% (for implementation of 12% to 18% GST) 17,200.78

Grand Total Amount (Rs.) 338,110.78

TOTAL CIVIL+PHE AMOUNT (RS.)- A 3,114,060.42

Abstract of cost for Grainage Hall

Rate Based on BCD SOR-2022

78 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All kinds of soil Cum 314.90 90.00 28341.00

79 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 123.90 60.00 7434.00

80 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 49.40 26.50 1309.10

81 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 287.30 225.00 64642.50

82 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

4.1.3 1:2:4 (1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) cum 3998.10 26.65 106549.37

83 4.17 Making plinth protection 50mm thick of cement concrete1:3:6 (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Sqm 436.60 60.00 26196.00

84 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete

5.33A.1 All work up to plinth level cum 4756.90 32.00 152220.80

5.33A.2 All work from plinth level upto floor V level

5.33A.2.1 Walls columns, pillars, posts cind struts cum 5293.50 7.25 38377.88

5.33A.2.2 Beams, plinth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 5677.20 48.48 275230.66

85 5.33B Add for using extra cement in the items of design mix over and above the specified cement content therein.

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 164.50 87.73 14431.59

86 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 211.60 140.00 29624.00

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 437.50 243.00 106312.50

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 241.00 97532.70

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 96.00 47462.40

5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 439.90 20.00 8798.00

87 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 4125.00 389812.50

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 1785.00 165291.00

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1705.00 154814.00

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia Kg 91.70 2665.00 244380.50

88 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 65.00 313293.50

89 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 51.00 42952.20

90 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse sand) sqm 599.30 25.00 14982.50

91 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 89.70 25.00 2242.50

92 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry sqm 113.60 25.00 2840.00

93 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

94 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2578.00 13.00 33514.00

95 9.53 providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) each 130.80 24.00 3139.20

96 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 161.10 1250.00 201375.00

97 9.96 Providing and fixing aluminium sliding door bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:

98 9.97 Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

99 9.100 Providing and fixing aluminium handles anodised ISI Marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

100 9.101 Providing and fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 60.80 4.00 243.20

101 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 447.20 150.00 67080.00

102 21.3 Providing and fixng glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With glass panes of 5.50 mm thickness (weight not less thar 13.75 kg/sqm) Sqm 1115.10 12.00 13381.20

103 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. sqm 6303.40 5.00 31517.00

104 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 165.40 6.00 992.40

105 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, Kg 114.60 550.00 63030.00

106 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

107 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

108 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 283.30 268.00 75924.40

109 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. Each 189.40 10.00 1894.00

110 13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 141.50 487.00 68910.50

111 13.12 15mm cement plaster on the rough side of single or half brick wall of mix:

112 13.24 6mm cement plaster to ceiling of mix:

113 13.26 Neat cement punning Sqm. 40.50 128.00 5184.00

114 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) SQM 137.00 297.00 40689.00

115 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. sqm 117.30 782.00 91728.60

116 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.40 1079.00 113726.60

117 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 1079.00 41649.40

118 13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 39.70 42.00 1667.40

119 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 116.50 60.00 6990.00

120 13.101 French spirit polishing:

13.101.1 Two or more coats on works including a coat of wood filler. sqm 215.80 42.00 9063.60

121 22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cum 3990.30 20.04 79965.61

122 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

123 Carriage of Materials

B Coarse sand Cum 1427.28 76.25 108830.02

C Stone chips Cum 1772.17 102.30 181292.48

D Local Sand Cum 248.86 225.00 55993.50

Difference of Cost

TOTAL CIVIL AMOUNT (RS.) 4,378,968.43

Total Amount (Rs.) 4,378,968.43

Add extra GST @5.36% (for implementation of 12% to 18% GST) 234,712.71

Grand Total Amount (Rs.) 4,613,681.13

124 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia Pipes metre 278.20 10.00 2782.00

18.8.3 25 mm nominal outer dia Pipes metre 463.10 50.00 23155.00

125 18.48 Providing and placing on terrace (at all floor levels ) polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per lit. 9.70 1000.00 9700.00

C.P. BRASS FITTINGS

126 18.49 Providing and fixing C.P. brass bib cock of Approved quality conforming to IS:8931 : Each 434.20 2.00 868.40

127 17.7 Provding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, , 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the .wall wherever required.

17.7.4 White vitreous china flat back wash basin size 550X400mm with a single15mm CP brass pillar tap Each 2135.80 1.00 2135.80

128 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

129 17.31 Provding and fixing 600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers complete. Each 1068.50 1.00 1068.50

RAIN WATER PIPE

130 12.78 Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

12.78.2 110mm diameter Metre 257.50 40.00 10300.00

131 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

PHE AMOUNT (RS.) 57,422.90

Total Amount (Rs.) 57,422.90

Add extra GST @5.36% (for implementation of 12% to 18% GST) 3,077.87

Grand Total Amount (Rs.) 60,500.77

TOTAL CIVIL+PHE AMOUNT (RS.)-B 4,674,181.90

Abstract of cost for Boundary wall

Length of new boundary wall = 100m & Length of renovation of old boundary wall = 700m

Rate Based on BCD SOR-2022

132 20.3 Boring, with hydraulic piling rigs with power units ,Providing and installing cast in situ single under reamed piles of specified diameterand length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

133 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l sqm 283.30 25.00 7,082.50

134 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level

5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 4688.30 7.50 35,162.25

135 5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) cum 5670.00 5.40 30,618.00

136 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). cum 5335.90 40.00 213,436.00

137 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels.

5.33B.4 Providing M-15grade R.C.C instead of M-20 grade R.C.C. cum 383.80 40.00 15,352.00

138 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 380.00 153,786.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 79.20 39,156.48

139 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 3050.00 288,225.00

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 2062.00 190,941.20

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1995.00 181,146.00

139 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 65.00 313,293.50

6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 65.00 54,743.00

140 Cement plaster in coarse sand

13.13 20mm cement plaster of mix:

141 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, railings, brackts gates & similar works kg 114.60 2350.00 269,310.00

(FINISHING WORK)

142 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 3600.00 138,960.00

143 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

13.79.1 New work (three or more coats) sqm 81.20 3600.00 292,320.00

144 13.81 Applying priming coat:

13.81.3 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works sqm 34.60 225.00 7,785.00

145 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

13.82.1 New steel work (two or more coats) sqm 83.50 225.00 18,787.50

146 10.43 Providing and fixing concertina coil fencing with punched tape concertina Per meter

coil 600 mm dia 10 metre openable length ( total length 90 m), having 50

nos rounds per 6 metre length, upto 3 m height of wall with existing angle

iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I. barbed wire tied to angle iron,

all complete as per direction of Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of

165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid separately) 272.60 800.00 218,080.00

147 10.33.6 Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l. each 9.00 2096.00 18,864.00

Dismantling & Demolishing work

148 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 823.70 50.00 41,185.00

149 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 21.70 2300.00 49,910.00

150 Carriage of Materials

B Stone Chips cum 1772.17 47.70 84,532.27

C Coarse Sand cum 1427.28 108.56 154,945.41

151 Difference of cost

Total Amount (Rs.) 3,937,035.36

Add extra GST @5.36% (for implementation of 12% to 18% GST) 211,025.10

Grand Total Amount (Rs.) -C 4,148,060.45

Abstract of cost for Campus Filling

Rate Based on BCD SOR-2022

152 2.25(A) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. cum 411.70 960.00 395,232.00

153 Carriage of Materials

Total Amount (Rs.) 1,015,536.00

Add extra GST @5.36% (for implementation of 12% to 18% GST) 54,432.73

Grand Total Amount (Rs.)-D 1,069,968.73

Abstract of cost for Dismantling of old building (Traisum building)

Rate Based on BCD SOR-2022

Dismantling & Demolishing work

154 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: cum 1411.20 25.00 35,280.00

155 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 823.70 85.00 70,014.50

156 15.8 Removing mortar form bricks and cleaning bricks including stacking with in a lead of 50m (stacks of cleaned bricks shall be measured):

15.3.1 From brick work in cement mortar cum 2706.20 35.00 94,717.00

Total Amount (Rs.) 200,011.50

Add extra GST @5.36% (for implementation of 12% to 18% GST) 10,720.62

Grand Total Amount (Rs.)-E 210,732.12

Abstract of cost for Electrical work (Office-cum-Training center & Grainage Hall)

Rate Based on BCD SOR-2023 (Electrical)

157 1.3.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required . (Group C) Point 1146.00 72.00 82,512.00

158 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 201.00 45.00 9,045.00

b 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 246.00 250.00 61,500.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 309.00 110.00 33,990.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 422.00 80.00 33,760.00

d 1.7.10 4 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 459.00 150.00 68,850.00

159 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cabl

160 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required.

a 1.24.1 5/6 amps switch Each 82.00 12.00 984.00

b 1.24.4 3 pin , 5/6 amps socket outlet Each 112.00 12.00 1,344.00

161 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. As required. Each 358.00 30.00 10,740.00

162 1.26 Supplying and fixing modular blanking plate on the existing modular plate & swltch box but excluding modular plate as required. Each 34.00 25.00 850.00

163 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 414.00 12.00 4,968.00

164 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As required Each 531.00 5.00 2,655.00

165 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 64.00 40.00 2,560.00

166 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 80.00 10.00 800.00

167 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

b 2.4.9 25/1OO A, 16 KA, TPMCCB Each 3934.00 0.00

168 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator)

a 2.8.8 14 way, Double door Each 3201.00 2.00 6,402.00

169 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator)

a 2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 4184.00 1.00 4,184.00

170 2.10 Supplying and fixing following ways surface / recess mounting, vertical type, 415 volt TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required' (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

a 2.10.1 4 way ( 4 + 12 ), Double door, Vertical type Each 7857.00 1.00 7,857.00

171 2.12 Supptying and fixing following rating, 240/ 415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required'

a 2.12.1 6 A to 32A, Single pole Each 237.00 42.00 9,954.00

172 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 3008.00 1.00 3,008.00

173 2.26 Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 4637.00 1.00 4,637.00

174 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. set 16675.00 4.00 66,700.00

175 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. mtr 144.00 40.00 5,760.00

176 3.16 Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required. mtr 53.00 40.00 2,120.00

177 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 521.00 40.00 20,840.00

178 5.15 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/ building including connection earthing the body etc as required.

179 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a 6.1.5 12 watt LED lamp Each 239.00 10.00 2,390.00

180 7.4 Laying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

181 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 2482.00 30.00 74,460.00

182 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

Total Electrical Amount (Rs.)-F 926,056.00

TOTAL AMOUNT (A+B+C+D+E+F) 14,143,059.63

INFRASTRUCTURE DEVELOPMENT AUTHORITY

(A GOVERNMENT OF BIHAR UNDERTAKING)

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Whatsapp Enabled Mobile Number

NIT - 06/TEN/IDA/26

Sl no. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 14,143,060.00

TOTAL AMOUNT Rs. 14,143,060.00

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

S.No. Particular Amount

1 Schedule Items 14,143,060.00

अंडी रेशम फार्म, बेगूसराय का कार्यालय सह प्रशिक्षण भवन , ग्रेनेज हॉल का निर्माण एवं पुराने चाहरदीवारी का जीर्णोद्वार कार्य

S. No. SOR 2022 Code Ref. Item of Work Unit Rate Quantity Amount

Abstract of cost for Office-cum-Training center (Traisum Building)

Rate Based on BCD SOR-2022

1 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All kinds of soil Cum 314.90 57.31 18046.92

2 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 123.90 39.59 4905.20

3 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 49.40 20.00 988.00

4 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 287.30 110.00 31603.00

5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

4.1.3 1:2:4 (1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) cum 3998.10 25.16 100592.20

6 4.17 Making plinth protection 50mm thick of cement concrete1:3:6 (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Sqm 436.60 40.00 17464.00

7 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete

5.33A.1 All work up to plinth level cum 4756.90 22.00 104651.80

5.33A.2 All work from plinth level upto floor V level

5.33A.2.1 Walls columns, pillars, posts cind struts cum 5293.50 4.50 23820.75

5.33A.2.2 Beams, plinth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 5677.20 25.55 145052.46

8 5.33B Add for using extra cement in the items of design mix over and above the specified cement content therein.

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 164.50 52.05 8562.23

9 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 211.60 73.45 15542.02

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 437.50 120.00 52500.00

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 55.00 22258.50

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 85.00 42024.00

5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 439.90 20.00 8798.00

10 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 1650.00 155925.00

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 1475.00 136585.00

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1850.00 167980.00

11 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 60.00 289194.00

12 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 48.00 40425.60

13 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse sand) sqm 599.30 35.50 21275.15

14 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 89.70 35.50 3184.35

15 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry sqm 113.60 35.50 4032.80

16 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

17 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2578.00 16.00 41248.00

18 9.53 providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) each 130.80 48.00 6278.40

19 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 161.10 350.00 56385.00

20 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. each 979.50 2.00 1959.00

21 9.96 Providing and fixing aluminium sliding door bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:

22 9.97 Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

23 9.100 Providing and fixing aluminium handles anodised ISI Marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

24 9.101 Providing and fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 60.80 4.00 243.20

25 9.103 Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Each 655.40 2.00 1310.80

26 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 447.20 150.00 67080.00

27 21.3 Providing and fixng glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With glass panes of 5.50 mm thickness (weight not less thar 12.50 kg/sqm) Sqm 1115.10 12.00 13381.20

28 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. sqm 6303.40 5.00 31517.00

29 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 165.40 5.00 827.00

30 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, Kg 114.60 550.00 63030.00

31 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

32 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

33 11.38 Providing and laying Ceramic glazed floor tiles 300x300mm Anti Skid (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete. sqm 862.40 15.00 12936.00

34 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 795.00 55.00 43725.00

35 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 283.30 128.00 36262.40

36 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. Each 189.40 6.00 1136.40

37 13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 141.50 325.00 45987.50

38 13.12 15mm cement plaster on the rough side of single or half brick wall of mix:

39 13.24 6mm cement plaster to ceiling of mix:

13.24.2 1:4( 1 cement: 4 coarse sand) sqm 125.60 85.00 10676.00

40 13.26 Neat cement punning Sqm. 40.50 56.61 2292.71

41 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) SQM 137.00 180.00 24660.00

42 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. sqm 117.30 410.00 48093.00

43 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.40 590.00 62186.00

44 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 590.00 22774.00

45 13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 39.70 93.00 3692.10

46 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 116.50 80.00 9320.00

47 13.101 French spirit polishing:

13.101.1 Two or more coats on works including a coat of wood filler. sqm 215.80 93.00 20069.40

48 22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cum 3990.30 10.00 39903.00

49 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

50 Carriage of Materials

B Coarse sand Cum 1427.28 36.42 51981.50

C Stone chips Cum 1772.17 66.22 117352.77

D Local Sand Cum 248.86 110.00 27374.60

Difference of Cost

TOTAL CIVIL AMOUNT (RS.) 2,634,728.22

Total Amount (Rs.) 2,634,728.22

Add extra GST @5.36% (for implementation of 12% to 18% GST) 141,221.43

Grand Total Amount (Rs.) 2,775,949.65

51 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia Pipes metre 278.20 25.00 6955.00

18.8.2 20 mm nominal outer dia Pipes metre 350.80 20.00 7016.00

18.8.3 25 mm nominal outer dia Pipes metre 463.10 15.00 6946.50

18.8.4 32 mm nominal outer dia Pipes metre 549.80 15.00 8247.00

52 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge

18.9.1 15 mm nominal outer dia Pipes metre 151.40 25.00 3785.00

18.9.2 20 mm nominal outer dia Pipes metre 205.30 20.00 4106.00

18.9.3 25 mm nominal outer dia Pipes metre 294.70 15.00 4420.50

18.9.4 32 mm nominal outer dia Pipes metre 359.10 15.00 5386.50

53 18.16 Providing and fixing brass stop cock of approved quality

18.16.1 15 mm Nominal bore each 303.80 4.00 1215.20

18.16.2 20 mm Nominal bore each 328.00 4.00 1312.00

54 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality.

18.17.2 32 mm Nominal bore Each. 589.90 1.00 589.90

55 18.19 Providing and fixing metal non-return valve of approved quality.

18.19.2 32 mm nominal bore

18.19.2.1 Horizontal Each. 677.60 1.00 677.60

56 18.48 Providing and placing on terrace (at all floor levels ) polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per lit. 9.70 1000.00 9700.00

C.P. BRASS FITTINGS

57 18.49 Providing and fixing C.P. brass bib cock of Approved quality conforming to IS:8931 : Each 434.20 6.00 2605.20

58 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS;8931

18.53.1 15 mm Nominal bore Each 500.40 6.00 3002.40

59 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Each 61.70 6.00 370.20

SANITARY INSTALLATION

60 17.1 Providing and fixing water closet squatting pan(indian type WC pan)with 100mm sand cast iron P or S trap, 10 litre low fixture complete , including ctting and making good the walls and level white PVC flushing cistern,including flush pipe with manuall controlled device(handle leer) cofirming to IS 7231, with all fittings and floors wherever required

17.1.1 white vitreous china Orissa pattern WC pan of size 580X440mm with integral type foot rests Each 4470.90 2.00 8941.80

61 17.2 Providing and fixing white vitreous china pedestal type-water closet (European type WC pan) with seat & lid, 10 litre low level white PVC flushing cisternincluding flush pipe,with manually controlled device(handle leaver) confirming to IS:7231 with all fittings and fixture complete , including cutting and making good the wall and floors wherever required

17.2.1 WC pan with ISI marked white solid plastic seat and lid Each 4230.00 1.00 4230.00

62 17.7 Provding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, , 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the .wall wherever required.

17.7.4 White vitreous china flat back wash basin size 550X400mm with a single15mm CP brass pillar tap Each 2135.80 2.00 4271.60

63 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

64 17.31 Provding and fixing 600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers complete. Each 1068.50 2.00 2137.00

RAIN WATER PIPE

65 12.78 Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

66 12.79 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.79.1 Coupler

12.79.6 Shoe (Plain)

67 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

EXTERNAL PHE WORKS

68 19.7 Constructing brick masonary manhole in cement mortar 1:4 (1 cement, 4 coarse sand.) R.C.C. top slab with1:2:4 mix(1 cement, 2 coars e sand, 4 graded stone aggregate 20 mm nominal size) foundation cocrete 1:4:8 mix (1cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size.) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand.) finished with floating coat of neat cement and making channels in cement concrete 1:2:4. finished with floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension tatal weight of cover and fram to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

19.7.1.1 With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5 Each 7914.70 5.00 39573.50

69 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5 Each 33603.40 1.00 33603.40

70 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

71 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.2 150 mm nominal size dia Mtrs. 660.10 60.00 39606.00

72 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.2 150 mm nominal size dia Metre 673.50 30.00 20205.00

73 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cum 1343.20 5.00 6716.00

74 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 916.80 16.00 14668.80

75 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

76 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

77 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

PHE AMOUNT (RS.) 320,910.00

Total Amount (Rs.) 320,910.00

Add extra GST @5.36% (for implementation of 12% to 18% GST) 17,200.78

Grand Total Amount (Rs.) 338,110.78

TOTAL CIVIL+PHE AMOUNT (RS.)- A 3,114,060.42

Abstract of cost for Grainage Hall

Rate Based on BCD SOR-2022

78 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All kinds of soil Cum 314.90 90.00 28341.00

79 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 123.90 60.00 7434.00

80 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 49.40 26.50 1309.10

81 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 287.30 225.00 64642.50

82 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:

4.1.3 1:2:4 (1 Cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) cum 3998.10 26.65 106549.37

83 4.17 Making plinth protection 50mm thick of cement concrete1:3:6 (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Sqm 436.60 60.00 26196.00

84 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete

5.33A.1 All work up to plinth level cum 4756.90 32.00 152220.80

5.33A.2 All work from plinth level upto floor V level

5.33A.2.1 Walls columns, pillars, posts cind struts cum 5293.50 7.25 38377.88

5.33A.2.2 Beams, plinth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 5677.20 48.48 275230.66

85 5.33B Add for using extra cement in the items of design mix over and above the specified cement content therein.

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 164.50 87.73 14431.59

86 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 211.60 140.00 29624.00

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 437.50 243.00 106312.50

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 241.00 97532.70

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 96.00 47462.40

5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 439.90 20.00 8798.00

87 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 4125.00 389812.50

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 1785.00 165291.00

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1705.00 154814.00

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia Kg 91.70 2665.00 244380.50

88 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 65.00 313293.50

89 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 51.00 42952.20

90 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse sand) sqm 599.30 25.00 14982.50

91 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 89.70 25.00 2242.50

92 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry sqm 113.60 25.00 2840.00

93 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

94 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 2578.00 13.00 33514.00

95 9.53 providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) each 130.80 24.00 3139.20

96 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 161.10 1250.00 201375.00

97 9.96 Providing and fixing aluminium sliding door bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:

98 9.97 Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

99 9.100 Providing and fixing aluminium handles anodised ISI Marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

100 9.101 Providing and fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 60.80 4.00 243.20

101 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 447.20 150.00 67080.00

102 21.3 Providing and fixng glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With glass panes of 5.50 mm thickness (weight not less thar 13.75 kg/sqm) Sqm 1115.10 12.00 13381.20

103 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. sqm 6303.40 5.00 31517.00

104 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 165.40 6.00 992.40

105 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, Kg 114.60 550.00 63030.00

106 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

107 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

108 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 283.30 268.00 75924.40

109 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. Each 189.40 10.00 1894.00

110 13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 141.50 487.00 68910.50

111 13.12 15mm cement plaster on the rough side of single or half brick wall of mix:

112 13.24 6mm cement plaster to ceiling of mix:

113 13.26 Neat cement punning Sqm. 40.50 128.00 5184.00

114 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) SQM 137.00 297.00 40689.00

115 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. sqm 117.30 782.00 91728.60

116 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.40 1079.00 113726.60

117 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 1079.00 41649.40

118 13.81 Applying priming coat:

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 39.70 42.00 1667.40

119 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 116.50 60.00 6990.00

120 13.101 French spirit polishing:

13.101.1 Two or more coats on works including a coat of wood filler. sqm 215.80 42.00 9063.60

121 22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cum 3990.30 20.04 79965.61

122 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.

123 Carriage of Materials

B Coarse sand Cum 1427.28 76.25 108830.02

C Stone chips Cum 1772.17 102.30 181292.48

D Local Sand Cum 248.86 225.00 55993.50

Difference of Cost

TOTAL CIVIL AMOUNT (RS.) 4,378,968.43

Total Amount (Rs.) 4,378,968.43

Add extra GST @5.36% (for implementation of 12% to 18% GST) 234,712.71

Grand Total Amount (Rs.) 4,613,681.13

124 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia Pipes metre 278.20 10.00 2782.00

18.8.3 25 mm nominal outer dia Pipes metre 463.10 50.00 23155.00

125 18.48 Providing and placing on terrace (at all floor levels ) polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per lit. 9.70 1000.00 9700.00

C.P. BRASS FITTINGS

126 18.49 Providing and fixing C.P. brass bib cock of Approved quality conforming to IS:8931 : Each 434.20 2.00 868.40

127 17.7 Provding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, , 32 mm C.P. brass waste of standard pattern, including paintings of fittings and brackets, cutting and making good the .wall wherever required.

17.7.4 White vitreous china flat back wash basin size 550X400mm with a single15mm CP brass pillar tap Each 2135.80 1.00 2135.80

128 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

129 17.31 Provding and fixing 600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers complete. Each 1068.50 1.00 1068.50

RAIN WATER PIPE

130 12.78 Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

12.78.2 110mm diameter Metre 257.50 40.00 10300.00

131 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

PHE AMOUNT (RS.) 57,422.90

Total Amount (Rs.) 57,422.90

Add extra GST @5.36% (for implementation of 12% to 18% GST) 3,077.87

Grand Total Amount (Rs.) 60,500.77

TOTAL CIVIL+PHE AMOUNT (RS.)-B 4,674,181.90

Abstract of cost for Boundary wall

Length of new boundary wall = 100m & Length of renovation of old boundary wall = 700m

Rate Based on BCD SOR-2022

132 20.3 Boring, with hydraulic piling rigs with power units ,Providing and installing cast in situ single under reamed piles of specified diameterand length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

133 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l sqm 283.30 25.00 7,082.50

134 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level

5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 4688.30 7.50 35,162.25

135 5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) cum 5670.00 5.40 30,618.00

136 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). cum 5335.90 40.00 213,436.00

137 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels.

5.33B.4 Providing M-15grade R.C.C instead of M-20 grade R.C.C. cum 383.80 40.00 15,352.00

138 5.9 Centering and shuttering including strutting, propping etc. and removal of form for:

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.70 380.00 153,786.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 494.40 79.20 39,156.48

139 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 94.50 3050.00 288,225.00

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 92.60 2062.00 190,941.20

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 90.80 1995.00 181,146.00

139 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 4819.90 65.00 313,293.50

6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 842.20 65.00 54,743.00

140 Cement plaster in coarse sand

13.13 20mm cement plaster of mix:

141 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, railings, brackts gates & similar works kg 114.60 2350.00 269,310.00

(FINISHING WORK)

142 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface:

13.78.1 Cement primer sqm 38.60 3600.00 138,960.00

143 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

13.79.1 New work (three or more coats) sqm 81.20 3600.00 292,320.00

144 13.81 Applying priming coat:

13.81.3 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works sqm 34.60 225.00 7,785.00

145 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

13.82.1 New steel work (two or more coats) sqm 83.50 225.00 18,787.50

146 10.43 Providing and fixing concertina coil fencing with punched tape concertina Per meter

coil 600 mm dia 10 metre openable length ( total length 90 m), having 50

nos rounds per 6 metre length, upto 3 m height of wall with existing angle

iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I. barbed wire tied to angle iron,

all complete as per direction of Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of

165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid separately) 272.60 800.00 218,080.00

147 10.33.6 Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l. each 9.00 2096.00 18,864.00

Dismantling & Demolishing work

148 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 823.70 50.00 41,185.00

149 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 21.70 2300.00 49,910.00

150 Carriage of Materials

B Stone Chips cum 1772.17 47.70 84,532.27

C Coarse Sand cum 1427.28 108.56 154,945.41

151 Difference of cost

Total Amount (Rs.) 3,937,035.36

Add extra GST @5.36% (for implementation of 12% to 18% GST) 211,025.10

Grand Total Amount (Rs.) -C 4,148,060.45

Abstract of cost for Campus Filling

Rate Based on BCD SOR-2022

152 2.25(A) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. cum 411.70 960.00 395,232.00

153 Carriage of Materials

Total Amount (Rs.) 1,015,536.00

Add extra GST @5.36% (for implementation of 12% to 18% GST) 54,432.73

Grand Total Amount (Rs.)-D 1,069,968.73

Abstract of cost for Dismantling of old building (Traisum building)

Rate Based on BCD SOR-2022

Dismantling & Demolishing work

154 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: cum 1411.20 25.00 35,280.00

155 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 823.70 85.00 70,014.50

156 15.8 Removing mortar form bricks and cleaning bricks including stacking with in a lead of 50m (stacks of cleaned bricks shall be measured):

15.3.1 From brick work in cement mortar cum 2706.20 35.00 94,717.00

Total Amount (Rs.) 200,011.50

Add extra GST @5.36% (for implementation of 12% to 18% GST) 10,720.62

Grand Total Amount (Rs.)-E 210,732.12

Abstract of cost for Electrical work (Office-cum-Training center & Grainage Hall)

Rate Based on BCD SOR-2023 (Electrical)

157 1.3.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required . (Group C) Point 1146.00 72.00 82,512.00

158 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 201.00 45.00 9,045.00

b 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 246.00 250.00 61,500.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 309.00 110.00 33,990.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 422.00 80.00 33,760.00

d 1.7.10 4 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 459.00 150.00 68,850.00

159 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cabl

160 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required.

a 1.24.1 5/6 amps switch Each 82.00 12.00 984.00

b 1.24.4 3 pin , 5/6 amps socket outlet Each 112.00 12.00 1,344.00

161 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. As required. Each 358.00 30.00 10,740.00

162 1.26 Supplying and fixing modular blanking plate on the existing modular plate & swltch box but excluding modular plate as required. Each 34.00 25.00 850.00

163 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 414.00 12.00 4,968.00

164 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As required Each 531.00 5.00 2,655.00

165 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 64.00 40.00 2,560.00

166 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 80.00 10.00 800.00

167 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

b 2.4.9 25/1OO A, 16 KA, TPMCCB Each 3934.00 0.00

168 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator)

a 2.8.8 14 way, Double door Each 3201.00 2.00 6,402.00

169 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator)

a 2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 4184.00 1.00 4,184.00

170 2.10 Supplying and fixing following ways surface / recess mounting, vertical type, 415 volt TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required' (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

a 2.10.1 4 way ( 4 + 12 ), Double door, Vertical type Each 7857.00 1.00 7,857.00

171 2.12 Supptying and fixing following rating, 240/ 415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required'

a 2.12.1 6 A to 32A, Single pole Each 237.00 42.00 9,954.00

172 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 3008.00 1.00 3,008.00

173 2.26 Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 4637.00 1.00 4,637.00

174 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. set 16675.00 4.00 66,700.00

175 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. mtr 144.00 40.00 5,760.00

176 3.16 Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required. mtr 53.00 40.00 2,120.00

177 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 521.00 40.00 20,840.00

178 5.15 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/ building including connection earthing the body etc as required.

179 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a 6.1.5 12 watt LED lamp Each 239.00 10.00 2,390.00

180 7.4 Laying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

181 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 2482.00 30.00 74,460.00

182 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

Total Electrical Amount (Rs.)-F 926,056.00

TOTAL AMOUNT (A+B+C+D+E+F) 14,143,059.63