Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-Finance | L1 | Accepted-Finance Accepted as 1st Lowest Bidder for the execution of subjected work | |
| 2 | L2₹9.2 L+₹80,705 (9.65%)Accepted-Finance | L2 | Accepted-Finance Accepted as 2nd Lowest Bidder for the execution of subjected work | |
| 3 | L3₹9.2 L+₹87,236 (10.4%)Accepted-Finance | L3 | Accepted-Finance Accepted as 3rd Lowest Bidder for the execution of subjected work | |
| 4 | Rejected-Technical | - | Rejected-Technical Bidder is not a Registered Electrical License |
Tender Value
₹9.9 L
EMD Value
₹19,800
Closing Date
11 Sept 2023, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, KPDCL, ED2nd,Rajbagh,Sgr
Office of the Executive Engineer, KPDCL, ED2nd,Rajbagh, Srinagar
HT Improvement of Feeder No. 1 of Receiving Station Rawalpora and Feeder No. 3 of Receiving Station Karan Nagar under Capex Budget 2023-24 (Scheme Code - PDDSS2022100281) - SITC Basis
2023_PDD_227550_1
ED-II/13 of 2023-24 Dated 24/08/23
Open Tender
Electrical Works
Turn-key
30 days
Areas fed From 11 KV Feeders viz RP01 and KN03
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
Ex. Engineer,KPDCL, ED2nd Credited to MH0801 Power
₹19,800
Yes
5 Oct 2023
25 Aug 2023
12 Sept 2023
25 Aug 2023
11 Sept 2023
26 Aug 2023
25 Aug 2023 - 26 Aug 2023
Amount
Supply and Erection of ST Pole 11 Mtr. Long (ST-410 SP56) with Galvanized Channel Iron Earthing Arrangement (as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)
Supply and Erection of ST pole 9 mtr long (ST 410 SP 33) with Galvanized Channel Iron Earthing Arrangement (as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)
Supply, Laying, Testing and Commissioning of 50 sqmm ACSR Conductor
Supply, Laying, Testing and Commissioning of 100 sqmm ACSR Conductor
Providing, Fabrication and Fixing of Galvanized Channel Iron Cross Arm (75x40x6mm)/ Galvanized Angle Iron Brace Arm (65x65x6mm) for existing poles ( for replacement) including Pole Collars 50x6 mm)
Providing, Fabrication and Fixing of Galvanized Channel Iron Cross Arm (75x40x6mm) along with bracing angles and back clamps as per drawing configuration CE/P&P/Drg/202211KVL0011 (1296 mm and 950 mm long GI Channel per pole for achieving Triangular Configuration of ACSR) on new 9 mtr poles
Providing, Fabrication and Fixing of Galvanized V Cross-Arms duly fabricated of size 75x40x6mm Channel Iron Cross Arm with 04 No. (50x50x6mm) welded flat iron plates as per Drg. No. CE/P&P/DRG/2022/11KVL001) including Pole Top Bracket fabricated out of a) 65x65x6mm (385 mm length), b) ISLC 75x40x6mm (65 mm long), c) MS Flat 02 No. (262 mm length each) and necessary Clamps
Providing and Fixing of Galvanized Nuts and Bolts of sorts
Supply, Installation, Testing and Commissioning of 11 kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc including its earthing using 25x3 mm strip
Providing and Fixing of 11 KV Polymer Pin Insulator 12 kV, 5 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm
Providing and Fixing of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm (with fittings)
Providing and Fixing of LT Shackle Insulators 16 KN 100 mm
Providing and Fixing of GI Muki Clamp (Complete) of 50x8 mm galvanized flat iron having end inner dia 18 mm for Shackle Insulators suitable for ST Pole with back clamp and galvanized nuts and bolts
Providing and Fixing of 11 KV Danger Plate with Clamp
Providing and Fixing of Anticlimbing Device using GI Barbed wire with end Clamps (2 kg Barbed wire per job/pole with 2 G I clamps with GI nuts/bolts and washers)
Providing and Earthing of ST Poles 11/9 mtr long using GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip 25x3 mm.
Providing and Laying of Cement Bottoming of ST Poles 9 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.5 cum/pole)
Providing and Laying of Cement Bottoming of ST Poles 11 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.6 cum/pole)
Providing and Painting of ST Poles 11 mtr long with 1 coat of Red Oxide and 2 coats of Aluminium Paint
Providing and Painting of ST Poles 9 mtr long with 1 coat of Red Oxide and 2 coats of Aluminium Paint
Dismantaling of existing ACSR Conductor of sizes and its transportation to Divisional Stores
Shifting of Smart meters from Old poles to New ones (including connectioning and proper clamping / mounting arrangement of GI Flat)
Dismantaling of old Link Set and its transportation to Divisional Stores at Bemina
Dismantaling of old ST Pole 9 mtr long and its transportation to Divisional Stores at Bemina
Dismantaling of old ST Pole 8 mtr long and its transportation to Divisional Stores at Bemina
Dismantaling of old Wooden pole and its transportation to Divisional Stores at Bemina
Dismantaling of PCC and its proper disposal
Dismantling and relaying of 100 sq mm ACSR
Dismantaling of existing Channels and its transportation to Divisional Stores at Bemina
Providing/Submission of both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page-pre/post)
Heaven Electricals
UBAID SUPPLIERS AND CONTRACTORS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .