New construction work of canal service road

Amount

Construction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 402

Providing, laying, spreading and compacting stone aggregates of specific sizes of 45-63 mm to water bound macadam Grading 2 specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates of specific sizes of 22.4-53 mm to water bound macadam Grading 3 specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Providing and applying Primer Coat with Emulsion SS-1 using bitumen distributor at the rate of 0.85 kg per sqm on the prepared granuler surfaces treated primer and cleaned with Hydraulic broom as per Technical Specification Clause 502. MORD

Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.225 kg per sqm on the prepared granuler surfaces treated primer and cleaned with Hydraulic broom as per Technical Specification Clause 503. MORD

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness compesed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant , paving and finishing by paver finisher laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508 Mord

Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Mord

Edging with M-100 second Class Bricks, bothside of road laid lengthwise including excavation, refilling consolidation with a hand packing and spreading nearly surplus earth within a lead of 50 meter

M/s Priya Builders

UDAY RAJ

M/S DURGA CONSTRUCTION AND SUPPLIER

OM SAI INFRA

M/S RAJESH KUMAR KATIYAR