SPECIAL REPAIR TO FLOOR, FALSE CEILING, SANITARY FITTINGS AND ALLIED WORKS IN BUILDING NO 117 AT CQAL, UNDER GE NORTH BANGALORE

Amount

Taking down cement plaster on brick or stone wall including raking out joints hacking for key scrubbing down with water etc and dispose off the debries outsde MD land complete all as directed.

Dismantling of ceiling boards any description fixed in any thickness and in any position with screws/nails including cover fillets/battens complete all as directed.

Taking down chowkat (without taking of shutter from the frame) exceeding 1.5 sqm and not exceeding 4.00 sqm each complete all as directed.

Taking down chowkat (without taking of shutter from the frame) not exceeding 1.5 sqm each complete all as directed.

Taking down shutter only of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as directed.

Taking down shutters of any description exceeding 2.00 sqm and re fixing in same opening with making good to floor and wall complete all as directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removal to store complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings complete all as directed.

Demolition of brick work or stone/boulder masonry/precast concrete articles and precast concrete block walling built in cement mortar, including all quoins, arches, pillars, etc etc and dispose off the debries outsde MD land complete all as directed.

Precast cement Concrete block masonry with solid blocks grade C-5 , exc 10cm in width and setting in cement mortar 1:6 complete all as directed.

Rendering CM1:6, 10mm thick on other than fair faces of brick work finished even and smooth without using extra cement complete all as directed.

Rendering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as directed.

Rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement (External surfaces) complete all as directed.

Preparing newly plastered surfaces and applying two coat of distemper oil emulsion over one coat of primer on walls including in narrow width bands cornice pilasters etc complete all as directed.

Preparation of newly plastered surfaces and applying three coats of white wash on wall surfaces complete all as directed.

Preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as directed.

Preparing newly plastered surfaces and applying two coats of cement based paint over one coat of primer on walls including in narrow width bands cornice pilasters etc complete all as directed.

Preparation of new steel & iron surface and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth complete all as directed.

E grid suspended false ceiling grid system of size 600mm x 600mm with main runner 32x24x0.6mm cross Tee 25x24x0.6mm and wall angle 22.2x22.2x0.5mm,Ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fastener, butterfly clips, hold down clips etc (Main runner, cross Tee & wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primed non asbestos fiber cement building board fixed to false ceiling including one coat distemper complete all as directed.

Steel window of box type frame (80x60x1.25mm profile sheet for frame) with box type shutter inside glazed shutter and outside gauged shutter with steel handle, telephonic peg stay complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per TD drg no 539 sheet 1/3 to 3/3 complete all as directed. (Note :- PCC in frame, glass pane & wire mesh to be paid separately under relevant items)

Steel Ventilators top hung / side hung shutter including peg stay complete with glazing bars,and 3 Nos 10x10mm square bars and as per TD Drg No. 539 sheet 1/3 to 3/3 complete all as directed.

Powder coated (minimum 50 micron coating) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

Powder Coated (minimum 50 micron coating) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized alumnium snap beading, screws etc complete all as directed.

5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as directed.

3mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes in opening complete all as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour pick sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable pick sheet beading and jointed together with solvent cement complete all as directed.

Anodized aluminium 200mm long barrel tower bolt complete all as directed.

250mm Anodized aluminium sliding door bolt (Aldrop bolt) complete all as directed.

100mm MS butt hinges medium weight cold rolled complete all as directed.

Anodized aluminium handles 150mm fabricated type complete all as directed.

Preparation of old decorated surfaces and applying one coat of white wash on walls including in narrow widths/ bands etc complete all as directed.

Preparation of old decorated surfaces and applying one coat of white wash on ceilings including in narrow widths/ bands etc complete all as directed.

Preparation of old decorated surfaces and applying Two coat of cement based paints on walls including in narrow/ widths, bands, cornices, pilasters etc complete all as directed.

Preparation of old painted surface and applying one coat of synthetic enamel paint on steel and iron surfaces over 10cm width or girth complete all as directed.

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all specified and directed

Preparation of old decorated surfaces including washing, rubbing down and stopping and applying one coat of oil emulsion distemper on walls complete all as directed.

Complete removal of existing treatment on plastered surfaces, and applying two coat of OBD over one coat of primer on wall complete all as directed.

Preparation of old decorated surfaces including washing, rubbing down and stopping and applying one coat of oil emulsion distemper on ceiling complete all as directed.

Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wood and wood based surfaces over 10cm width or girth complete all as directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as directed.

15mm bore medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as directed.

20mm bore medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as directed.

Dismantling floor, hearth or wall tiling including cement bedding (but not backing) removing unserviceable tiles outside MD land and rubbish off complete all as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, Laid, bedded and pointed in any mortar and removing unserviceable slabs outside MD land complete all as directed.

18- 20mm thick mirror polished granite stone slab (of any type) machine cut, in floor/trades/ risers, bedded over and including 15mm screed bed in CM 1:4, jointed with gray cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc complete all as directed.

18- 20mm thick mirror polished granite stone slab (of any type), machine cut, in Pillar/ wall surfaces laid over and including 10mm thick rendering in CM 1:4 and jointed with gray cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc. complete all as directed.

22mm thick (square/ rectangular) cement concrete designer tiles with pegnented colour, as in floors/ treads of steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm screed bed in CM 1:6, complete all as directed.

22mm thick (square/ rectangular) cement concrete designer tiles with pegnented colour as in vertical surfaces/ risers of steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed

Vitrified tiles 10mm thick (square/rectangular), Light shade, polished, area of each tiles 600mm x 600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm screed bed in CM 1:4, complete all as directed.

Vitrified tiles 10mm thick (square/rectangular), Light shade, polished, area of each tiles 600mm x 600mm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm screed bed in CM 1:4, complete all as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, etc. complete all as directed.

Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, etc. complete all as directed.

Vitreous china WHB flat back size 630 x 450mm excluding chain and plug including CI Bracket complete all as directed.

Vitreous china squatting pan , ''Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap , and to flushing pipe , anti syphonage pipe ,etc complete all as directed.

Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) including P trap and seat covers etc complete, fixed in repairs complete all as directed.

PVC valve less , syphonic action type , flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, PVC connections to pipes and fixing of lever, complete including brackets, in repairs complete all as directed.

Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as directed.

32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, suitable for wash hand basin complete all as directed.

32mm Waste fittings, brass, chromium plated for glazed ware urinals, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, suitable for urinal complete all as directed.

Waste pipe for wash hand basin complete all as directed. Make: Prayag/Shakti/Polytuf

Waste pipe for urinal complete all as directed. Make: Prayag/Shakti/Polytuf

15mm bore push tap suitable for urinals CP brass screwed for iron pipe and fixed in repairs, (Minimum weight 15mm-50gms) complete all as directed.

Vitreous china urinal partition white of size 310x700 mm complete all as directed.

CP Health faucet (Jet Spray) 15mm dia with flexible pipe 1.2 m long and fixing nut etc complete fixed in repairs complete all as directed. Make : Jaquar model No ALD-563 or equivalent of Kohlar/Hindware

Two ways bib cock with angle valve combination brass chromium plated, fixed in repairs complete all as directed.

PVC connection pipe 15mm size with PTMT nuts of length 450mm complete all as directed.

15mm pillar tap, cast copper alloy chromium plated, with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as directed.

Looking mirror 600 x 450 with 5mm thick PVC sheet frame and both supported with 5mm thick PVC sheet complete all as directed.

15mm bib tap fancy type cast copper alloy with crutch or butter fly handle screwed down high pressure for iron pipe or brass ferrule etc complete all as directed.

15mm stop cock fancy type, chromium plated with long shank and cup (concealed type) / cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc complete all as directed.

15mm angle cock fancy type, chromium plated with with crutch or butter fly handles screwed down high pressure for iron pipe or brass ferrule etc complete all as directed.

75mm bore PVC SWR pipe, single socketed in any length with rubber ring joint fixed to wall including removing to existing pipe complete all as directed. (Note : Contractor should quote the rate regarding vertical stacks by considering 12.00 metre approx height of the buildings.)

110mm bore PVC SWR pipe, single socketed in any length with rubber ring joint fixed to wall including removing the existing pipe complete all as directed. (Note : Contractor should quote the rate regarding vertical stacks by considering 12.00 metre approx height of the buildings.)

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm bore PVC (SWR) bends with access door complete all as directed.

110mm bore PVC (SWR) bends with access door complete all as directed.

75 mm bore PVC (SWR) branch piece (double Y) equal or unequal complete all as directed.

110 mm bore PVC (SWR) branch piece (double Y) equal or unequal complete all as directed.

PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

Dismantling water tanks of capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs complete all as directed.

Disconnecting existing tanks of capacity exceeding 500 Ltrs & not exceeding 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Complete all as directed.

Rotational moulded 3layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity of tank 1000 Ltrs all as specified in SSR Part I complete all as directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20mm bore, minimum wt 210 gms, fixed in repairs complete all as directed.

20mm dia Gunmetal, globe or gate valves, screwed both ends for iron pipe and fixed in repairs complete all as directed.

25mm dia Gunmetal, globe or gate valves screwed both ends for iron pipe and fixed in repairs complete all as directed.

Welded steel wire fabric not exceeding 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as directed.

Taking down Wall paneling and similar work complete all as directed.

5mm thick Printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent Cement and fixing at site complete all as directed. (Make : Rajshree or its equivalent) (Note : Wall paneling to be fixed without disturbing E/M fittings).

Dismantling wooden framed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer’s instructions above the treated area. (v) Ponding the treated portion at least 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost.

(vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using brick bat) complete all as directed. Note :- (i) The sunken slab sloped towards outer face so as the drain the water to GI Spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level. Ensure the drain of pipe dia is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered. Mode of measurement: Surface area of sunken floor will be measured irrespective of depth of sunken floor. Make of polymer modified compound : Sika/ Pedilite/ STP/Berger/ Fosroc.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Point wiring, concealed by using 1.5 sqmm PVC insulated unsheathed, FRLS, copper conductor multistrand drawn in suitable sunken box and frame cover plate for mounting of modular switches/ sockets as required at site and provn of PVC rigid non metallic conduit medium density ISI marked fixed with all fittings and all accessories compete for one light/ fan/bell point controlled by one switch including provision of 1.5 sqmm PVC insulated, FRLS copper conductor continuos earth wire connected to common earth dolly complete all as directed. Note : MS sunken boxes, cover plates with frame switches, sockets shall be measured and paid seperately in an appropriate item of Sch 'A' and laying/ fixing of sunken box and cover with frame is included in quoted rate.

one light point controlled by one switch.

One fan point controlled by one 5 Amps switches/regulator.

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket out let 5 Amps on same board.

All as per item No 97 but for 16 Amps socket outlet by using 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC complete all as directed.

Note for Item No 97 & 98 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet in the item rate quoted for point wiring.

Modular type Switch piano 6 Amps ,one way 1 module complete all as directed.

Modular type Switch piano 16 Amps ,one way 1 module complete all as directed.

Modular type Socket outlet, 6 Amps 2 module complete all as directed.

Modular type Socket outlet, 6/16 Amps 2 module complete all as directed.

Modular type Fan step regulator, 120W, 2 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 2 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 3 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 4 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 5 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 6 module complete all as directed.

LED light fitting 10watt(2 feet long) wall mounted inegeral sleek polycarbonate LED channel with white acrylic cover ,conncted block etc ,complete with all accessories internally pre wired and including connecting up twin core twisted flexible copper conductor cable complete all as directed. Make:- Bajaj cat part No BCLSB10WH or equivalent model of Polycab/Wipro/Jaquar

LED light fitting 18watt(4 feet long) wall mounted inegeral sleek polycarbonate LED channel with white acrylic cover ,connector block etc ,complete with all accessories internally pre wired and including connecting up twisted core twit flexible copper conductor cable complete all as directed. Make:- Bajaj cat part No BCLSB18WH or equivalent model of Polycab/Wipro/Jaquar

LED 30W building security light having high power LED with high pressure diw cast housing prismatic polycarbonate diffuser IP 65 protection complete all as directed. Make:- Bajaj cat part No BCLST 30W LED I or equivalent model of Polycab/Wipro/Bajaj/Jaquar

Removing the existing old GI bracket and provision of new GI bracket made out of 40 mm dia GI tubing with light grade of approx length 1.5 m size fabricated to a shape including necessary fixing MS clamps made out of 25X6mm, bolts, nuts & washers complete all as directed.

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

MCB single pole 240 volts 5 to 40 Amps (Curve-C) complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

MCB single pole and neutral 240 volts 32Amps (Curve-C) complete all as directed.

Sub main wiring 1100 volts grade multistranded PVC insulated FRLS copper conductors Four runs of single core 10 sqmm along with 10 sqmm PVC insulated FRLS two runs of single core multistranded copper conductor cable as earth continuity conductor run along in PVC conduit including taking down old submain wiring complete all as directed.

Sub main wiring 1100 volts grade multistranded PVC insulated FRLS copper conductors Four runs of single core 16 sqmm along with 16 sqmm PVC insulated FRLS two runs of single core multistranded copper conductor cable as earth continuity conductor run along in PVC conduit including taking down old submain wiring complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

LED 2x2 Recess mounted LED Luminaire with white powder coated CRCA housing with seamless front frame ,diffuser fitting 36 watts 5700K complete with accessories complete all as directed. Make:- Bajaj cat part No BZRSQL 36W GZ WH or equivalent of Polycab/Wipro/Bajaj/Jaquar

Removing of unserviceable ceiling fan/ Exhaust fan and cleaning servicing, changing of bearing, rubber bush nut bolts and writing of MES/SL no, painting and refixing complete all as directed.

Down rod for ceiling fan upto 1.5metre including nut, bolts, washers including all accessories complete all as directed.

Exhaust fan AC single phase 230/240 V of size 300mm sweep, heavy duty, metal body, 1400 RPM with louver including making of hole for exhaust fan anf finishing the hole including fixing of louver, wiring complete all as directed

SREE VINAYAKA ENTERPRISES

shashi shekar construction

M.S.Trading Company

S L R Construction

K. VENKATESH NAIDU