Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC | L1 | Accepted-AOC Lowest tender found in order | |
| 2 | L2₹30.2 L+₹20,428.62 (0.68%)Rejected-AOC | L2 | Rejected-AOC Other than lowest tender |
Tender Value
Refer Docs
EMD Value
₹63,500
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPL REPAIR TO BLDG NO T 10 AND T11 OF FD WKSP COY AND PROVN OF MAIN ENTRANCE GATE OF MTN BDE AT TREHGAM AND PROVN OF BATHROOM AT INF BN TA AT PATHAHIRI GARRISON
2022_MES_546593_1
GE 874/EWS-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹63,500
Yes
12 Nov 2022
20 Aug 2022
12 Sept 2022
20 Aug 2022
10 Sept 2022
27 Aug 2022
Amount
B/R and E/M Portion
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.
M&L coloured Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to mach over 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded agg)and 15mm thick screed bed in Cement Mortar 1:4 complete all as specified.
M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B0(using 12.5mm graded agg)and 15mm thick screed bed in Cement mortar 1:4 complete all as specified.
M & L for glazed coloured ceramic tiles of size 450 x 350 x 7 mm, coloured in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including 10mm thick rendering as bed or bedding layer in Cement Mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete all as specified and directed.
M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.
M& L for Machine cut kota stone slab 20-25 mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including screed bed in cement mortar 1:4 complete all as specified.
Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.
M &L for second class soft wood as in scantling clean sawn fixed in position.
M & L for second class soft wood as in scantling clean sawn fixed in position but except timber.
Dismantling of boarding, any description, fixed in any position with nails.
M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.
6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails screws to timber frame work complete all as specified.
M& L for E-board ceiling 6mm thick precoated non asbestous E board classic designer tiles of size 595x605mm manufactured by Everest Eternite Ltd. Fixed in GI snap grid interlocking system powder coated at bottom of same manufactures including GI wire as per manufacturer specifications. if pre coating is spoiled by worker while fixing of tiles the complete tile surface shall be provided with 2 coats of plastic emulsion paint without any price adjustment.
M & L plain fillet square, rectangular in section exc. 3 & n exc. 6 sqcm. of second class softwood.
S&F clean swan batten at 30 cm centre exc 5 and not exc 15 sqcm of 2nd class softwood complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L plywood, grade BWR, type BB, fixed with nails to timber frame/existing board ceiling(as applicable), 6mm thick as in ceiling and wall lining complete all as specified.
Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws complete all as specified.
Dismantling brick work or stone masonry built in cement mortar complete all as specified.
M & L brick work with Sub class B Bricks in cement mortar 1:6, straight or curved on plan exc 6m mean radius complete all as specified.
M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4.
Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc complete all as specified.
M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in Cement mortar 1:4 finished over and smooth without using extra cement.
M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:4, finished even and smooth without using extra cement complete all as specified.
M & L applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified.
Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking off shutter).
Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame).
M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints complete all as specified.
S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified
S& F 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified
S & F M S butt hinges 100mm long medium weight.
S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section complete all as specified.
S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified.
S & F aluminum handles, cast type, anodized 150mm long.
S&F MS butt hinges 75mm long medium weight
S&F 150 mm long aluminium alloy, anodised barrel tower bolt of extruded section.
S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified.
Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads.
M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick complete all as specified.
S& F wire netting of stainless steel wire 0.71 mm dia and size of mesh 12mm fixed with tinned tacks of stainless steel wire staples including fixed in repair complete all as specified.
S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed in repair all as specified.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified.
M&L one coat of synthetic enamel paint on old painted wooden or wood base surface of any description not otherwise described over10cm width or girth complete all as specified.
M & L cements concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75 mm thick complete all as specified.
Taking down steel tubing and connection 15 mm bore complete all as specified.
S&F 16mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. in any length complete all as specified.
S&F 15 mm Bib taps cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified.
M&L hard core of guge in exc. 63mm deposited spread and levelled in layersn.exc 15cm thick watered and rammed to a true surface complete all as specified.
M&L 75 mm thick PCC type D2 1:4:8 (40 mm graded crushed stone agg) as in sub base complete all as specified and directed by Engr-in-Charge
M&L 50mm thick sand cushion under paving block including watering and consolidation for interlocking tiles all as specified.
S&F machine pressed precast concrete interlocking paver block 60mm thick any shape with gray cement and no pigment all as specified.
M & L for chequered cement concrete tiles 25cm X 25cmX22mm thick set and jointed and poied in neat cement slurry in floor with grey cement and pigment over cement screed 15mm thick in Cement Mortar 1:6 complete all as specified and directed.
M&L PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded aggregate) for copping, including weathering slightly rounded or chamfered using form work (Straight or curved) complete all as specified.
M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in slabs, shelves supported on walls, columns plinth beams etc complete all as specified and directed.
S&F Mild Steel ISA 35 x 35 x 4mm as in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc conforming to Fe 410 or Fe 310 complete all as specified.
S&F WHB(550X400)mm white with CI bracket, 32mm dia galvanised waste pipe (1.00RM Approx), CP steel chain and rubber plug (with mirror) complete all as specified.
S&F 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified.
S&F 20mm dia D type towel rail 600mm long of aluminium anodised with and including screws complete all as specified.
S&F PVC grating 100mm dia fixed to floor trap complete all as specified.
M&L for cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in walls any thickness size or shape complete all as specified
M&L for formworks to edges concrete flats and sides of RCC bands in walls, horizontal or sloping complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out,in soft/loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.
M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) in foundations filling and mass concrete.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zink chromate primer paint including preparation of surface.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed by Engr-in-charge.
Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with raised acrylic words complete all as specified and directed by Engr in Charge.
S & F ACP sheets 3mm thick for fixing into steel structure with necessary arrangements complete all as specified and directed by Engr in Charge.
M&L for two coat of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall incl preparation of surface complete.
Surface excavation n.exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc in soft/loose soil all as specified.
M&L plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate all as specified.
M & L for walling of random rubble, un-coursed well bonded bedded solidly hearted built in cement mortar 1 : 6.
Returning and filling incl spreading leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil all as specified.
Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point all as specified
M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L MS TMT bars 5mm dia and over upto andincluding 10mm dia in stirrups, spacers and binders and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for RCC M-25 Design Mix using 20 mm gradded stone aggregate for Columns, pillars, piers, posts and struts.
M&L for RCC M-25 design mix using 20 mm gradded stone aggregate for beams, cantilevers & lintel beams etc.
Form work to sides of concrete foundations, footings, bases of columns, raft and raft eams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for flat rough finished surfaces of concrete.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polyg flat rough finished surfaces of concrete
Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L Material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified
M&L Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering
S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint color PVC sheet reinforced with MS square tube, and fitted in opening all as specified.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain color PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete omplete with glazing bars, dove tailed or welded including one shop coat of zinc chromites primer.
S&F Mild steel pressed handle, oval type stove enameled, black size jof handle 100mm
Mild steel tower bolt stove enameled black 100mm long black with bright bolt and fixed.
S&F MS flat iron as in hold fast all as specified.
S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia.
M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests incl flush pipe of PVC 32mm dia for low level cistern fixed complete all as specified.
S&F vitreous China bowl urinal flat back, size jof 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).
S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity fixed in repair complete all as specified and directed.
Soap dish, vitreous China white, approximate size 160x 160x90mm.
S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.
Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions
M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls all as specified.
Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Pillar tap 15mm bore fancy type cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.
S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink.
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement.
S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.
S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.
S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.
S&F 75mm bore PVC (SWR) bend or tee or radius complete all as specified.
M&L for PVC (SWR) WC connector with lip ring 110mm.
M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.
M&L for PVC (SWR) Reducer 110/75mm dia all as specified.
Construction of 10 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-1080/2011 Sheet 1/1 dated 01.12.2011
Construction of Soakage well, excavation in ordinary soil, foundation in PCC 1:3:6, Wells of honey combed and solid brick work in CM, RCC cover slab in , filling with brick bats complete of size 1.20 m dia x 3.0m deep.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.
All as per item above here-in-above but for 3-pin socket out let 5 Amps on same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above here-in-above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above here-in-above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.
Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj
Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.
S&F in replacement for decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells product code LUMILINEPLUSBS20WLED865SPCSS or equivalent of approved make as approved by Engr-in-Charge.
Supply and fixing in replacement of LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor.
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor.
S&F in replacement of modular type Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips.
S&F in replacement of ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips.
S&F in replacement of socket outlet 2-in-1, 3 pin, 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.
S&F in eplacement of Switch socket combination 2-in-1 5 pin 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.
S&F in replacement of Switch socket combination 5 in 1, 5 and 15 Amp modular type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips.
S&F in replacement of rectangular boards/ blocks 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr-in -charge.
S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havelles/MDS/Legrand.
S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havelles/MDS/Legrand.
Supply & Fixing RCBO, single pole and neutral (SPN) 300mA, 240V , 6-63 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
S&F in replacement of RCBO, double pole Single phase and Neutral 240 Volts , 50 H 6-63 Amps, 100mA all as specified and as directed.
S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips
S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Havells/Legrand/Philips.
S&F in replacement of Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning complete all as specified and directed by Engr-in-Charge.
S&F in replacement of house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza
S&F in replacement of 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core complete all as specified and directed.
Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.
Earthing complete with galvanised steel earth plate electrode 60cm × 60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.
S&F in replacement of rectification of irragular voltage, voltage stabilizer for automatic operation, single phase and neutral air cooled indoor type & designated for input variation between 90V to 290V with output voltage stabilizer at 230 V with accuracy + 2.5% 4-6 Sec initial delay and of capacity 10 KVA all as specified and directed by Engr-in-Charge Make : as approved by Engr-in-Charge.
Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge.
Nippple suitable for HDPE water tank of 20mm (Minimum weight 20mm-45gms).
Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m Make : Havells/ Bajaj/USHA.
PP-R Gate valves (brass insert) as per requirement of the site (25 mm) and as specified and directed by Engr-in-Charge.
S & F in replacement of Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 20mm and fixed complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 25mm and fixed complete all as specified and directed by Engr-in-Charge.
S&F in replacement of GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.
S&F in replacement of GI water tubing 25mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.
M/S ASMATULLAH SHAH
Bidder Name
M/S ASMATULLAH SHAH
M/S GM CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .