Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being L-1 | |
| 2 | L2₹25.2 L+₹23,696.95 (0.95%)Rejected-AOC VPO SARNA STATION PATHANKOT 145 025 PB | PATHANKOT | PUNJAB | 145025 | L2 | Rejected-AOC Not being L-1 | |
| 3 | L3₹26.6 L+₹1.6 L (6.50%)Rejected-AOC | L3 | Rejected-AOC Not being L-1 | |
| 4 | L4₹26.9 L+₹1.9 L (7.67%)Rejected-AOC | L4 | Rejected-AOC Not being L-1 | |
| 5 | L5₹28.6 L+₹3.6 L (14.4%)Rejected-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-AOC Not being L-1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun PiN-145001
REPAIR TO MISC B/R WORKS IN CENTRAL AMENITIES UNDER AGE B/R-II OF GE (N) MAMUN
2023_MES_629311_1
GE(N)/M-57/2023-24
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹60,000
9 Feb 2024
22 Nov 2023
20 Dec 2023
22 Nov 2023
18 Dec 2023
5 Dec 2023
Amount
Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 in two layers (10+5mm) on brick masonary of brick work surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparing new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.
S&F pressed steel frames for doors/windows of size 125x60mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified.
S&F Factory Made Solid PVC Moulded door Shutter with solid PVC Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.
S & F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F continuos (piano) hinges, mild steel, bright finish or elcetrogalvanised size of flap 30 mm complete all as specified and directed.
S&F 100mm hasp and staples, safety type of aluminium anodised complete all as specified and directed.
Mild steel pressed handle oval type of size 150mm complete all as specified and directed.
S&Fstainless steel sliding door bolts (ISI Marked) 250mm long, , with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.
S & F in repair 150 mm MS helical door spring for door closer,complete all as specified and directed.
Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F factory made uPVC white colour Three track three panels sliding mitred cut and fusion welded window with two nos. glazed & one no. wire mesh panels, made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (area of window above 1.75 sqm) comprising of UPVC multi chamered frame with in built roller track and sash extruded profile duly reinforced with 1.6+0.2mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to UPVC profile), UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers necessary stainless steel screws etc complete all as specified and directed . (Glass or wiremesh shall be paid separately)
S&F 5.50mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S & F Factory Made HDF Moulded Door, 30 to 32mm thick (stiles), with raised panel design with prelam Moulded on the front face having resistance to spread of flame, termite / borer proof , water / moisture proof and fire retardant fixing in frame at site complete all as specified and directed.
S&F of Factory made single extruded WPC solid door Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers and non toxic additives fabbricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screw sand resistance to spread of flame, termite / borer proof , water / moisture proof and fire retardant complete all as specified and directed.
Supply and fixing factory made 17mm thick WPC (wood plastic composite boards) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density not less than 600 kg /cm3 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet (jointing and pasting as per Manufacturer's specification) including demoltion of old ply/board etc, its removal complete all as specified & directed. Make: ECOSTE/FLORESTA/SNGECO or equivalent.
S& F 125 mm size stainless steel brignt finish handle ( as per sample) fixed with Nut and bolt complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges, fency type with concealed pattern ( as per sample) fitted to shutters complete all as specified and directed. Make:- Home choice, Hettich, Hatlay
S&F Stainless steel Soft Close Hinge 9.5 Crank ( as per sample) for Half Overlay Door -fitted to shutters complete all as specified and directed. Make:- Home choice, Hettich,Hatlay)
S&F Magnetic catcher for shutter ( as per sample) fitted with suitable screws complete all as specified and directed.
M&L for 5-6mm thick PVC sheet panels suitably fixed in false ceiling grid Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including necessary drilling holes in wall and RCC for ceiling including dismantling of old ceiling, all as per specification complete all as specified and directed.
M&L for PVC Wall Lining (super heavy) consisting of 6mm thick wood grain PVC sheet includingusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into wall including dismantling of old complete all as specified and directed.
M&L heavy duty Industrial tiles 10mm thick (sqaure/ rectangular) area of each tile exc.0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.
Dismantling floor, hearth or wall tilling and terrazo topping including cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4 complete all as specified and directed .
M&L for vitrified tiles 8 mm thick ( Square or rectangular) polished, double charged area of each tile not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for vitrified tiles 8 mm thick ( Square or rectangular) polished,double charged area of each tile not exceeding 0.36 sqm in daddo, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
Fixing only the 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.
Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed.
S&F in repair Bib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed
S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed.
S & F in repair pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed .
S & F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed.
S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm complete all as specified and directed.
S&F in repair stainless steel grating 100 mm dia of (Minimium weight 25gms) complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastec seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish complete all as specified and directed.
M&L for Cement concrete type C1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.
M&L Marble work 12mm to 15mm thick (table rubbed and polished) in cooking plateform, window cill, steps etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra complete all as specified and directed.
Dismantling water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing from site complete all as specified and directed.
Dismantling water tank of capacity exceeding 500 litres but not exceeding 1000 litres and removing from site complete all as specified and directed.
M&L Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories, complete all as specified and directed.
M&L Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including all accessories, complete all as specified and directed.
S & F 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection ) complete all as specified and directed.
M & L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (WPC measured separetaly) complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane/ directed .
All as per item No 79 but except "Provide solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm on accessible RCC roof as prescribed by manufacture of membrane on top of membrane".
S&F Cast iron waste and vent pipes sand cast 100mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includingudign taking down the unservicable pipe with fitting complete all as specified and directed
S&F Cast iron waste and vent pipes sand cast 75mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includingudign taking down the unservicable pipe with fitting complete all as specified and directed
S&F CI branch piece single of 100mm bore or with parallel branches fixed in repair complete all as specified and directed.
S&F CI branch pipece single of 75mm bore or with parallel branches fixed in repair complete all as specified and directed.
S&F Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.and directed.
M&L for reinforced cement concrete 1:2:4 type B-0 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L Granite ( including demolition of old stone/ tiles) work 15mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills,cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed.
Taking down shutters of any description n exc 1 Sqm each omplete all as specified and directed.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580x440mm 'white' with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.
S&F in repair towel rail CP 600 mm long complete all as specified and directed.
S&F in repair grating 100 mm dia of PTMT. (Minimium weight 25gms) complete all as specified and directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified and directed. Make - Jaquar , Marc and Johnson
Dismantling brick tile or terracing tiles single layer on roof including removal of rubbish complete all as specified and directed.
M&L for PCC Tiles (250mm x 250mm x 20mm ) laid on and including 20 mm thick cement sand mortar in the ratio of 1:4, set, grouted flush and jointed in neat cement slurry complete all as specified & directed.
M&L for brick tiles laid on cement mortar in CM 1:4 and joints grouted and flush pointed in CM (1:3), (except brick tiles) mixed with 5 % of crude oil by wt. of cement complete all as specified and directed.
Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern), including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.
S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating (zinc coating 275) GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Plain, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for False ceiling of 7 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed with using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board with grid work etc of any type/pattern/description complete all as specified and directed. Make: M/s Saint Gobain or equivalent of Armstong/Everest
S&F in repair Curtain rails of 20mm bore, anodised aluminium alloy with bracket, fenials, fancy type,(all as per sample) fixed in position complete all as specified and directed.
M&L for Machine cut kota stone in flooring 18-20mm thick over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete all as specified and directed.
M&L for Machine cut kota stone in flooring 18-20 mm thick over but in riser, skirting, dado and pillar laid over 10 mm thick bedding layer of cement mortar 1:4, laid and jointed with grey cement slurry including rubbing and polishing complete all as specified and directed.
S&F in repair Vitreous china wash down wall hung one piece water closet pan (pedestal pattern), (as per sample) white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed.
S&F in repair Vitreous china wash down one piece water closet pan (pedestal pattern), (as per sample) white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed.
M&L providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with equired EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as specified and directed.
M&L for powder coated aluminium grill of approved design / pattern, with approved standard section, (as per sample) fixed to existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre , including cutting grill to proper opening size for fixing and operation of handles, fixing of approved standard section around the opening as per requirement complete all as specified and directed.
S&F powder coated aluminium door shutters, (as per sample) aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, 200mm size handles 2 Nos in each door, 03-SS hinges, powder coated aluminum snap beading fixed with screws complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, (as per sample)fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium aluminium snap beading, screws complete all as specified and directed.
S&F in repairs touch free automatic Stainless Steel Hand Dryer (as per sample) Size not less then 235 x 205 x 265 mm including necessary accessories and fixing arrangement all as directed. Make: Cera/Jaquaror equivalent.
S&F in repair inbuilt touch-free sensor with DC battery operated kit of approved quality for urinals (as per sample) complete all as specified and directed.
S&F in repair cabinet PVC size 510 x 490 x 100 mm with looking mirror full openable door (as per sample) complete all as specified and directed.
S&F in repair health foucet hand shower 8mm dia 1m long flexible hook and wall hook (as per sample) complete all as specified and directed.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm (as per sample) wide with SS chromium plated brackets double guard and railing 60cm long, complete all as specified and directed
S&F in repair corner glass sheleves assembly (as per sample) consisting of 5.5mm thick sheet glass Size not less then 300x300x70mm with chromium plated brackets double guard and railing complete all as specified and directed
S&F in repairs Stainless Steel Tumbler Holder with Toothbrush Stands (as per sample) Fitting with screws and nails complete all as directed
S&F in repairs Stainless Steel toilet paper holder (as per sample) with lid & flash recessed type fitted with S S screws complete all as directed
S&F in repairs Stainless Steel Folding Towel Rack, (Size: 18 Inch Round) with Swivel Towel Bar with towel hooks design Fitting (as per sample) with screws and nails complete all as directed
S&F in repairs 250ml PVC Soap Dispenser with Shower Lotion/ Gel/ Liquid Shampoo etc with Pump, (as per sample) fitted with screws and nails complete all as directed.
Deduct :Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 41,005.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
SUBASH MAHAJAN
AV ENTERPRISES
M/S BHOTO AND CO
RD Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .