Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.0 LAccepted-AOC | L1 | Accepted-AOC Acceptance of tender | |
| 2 | L2₹67.9 L+₹1.8 L (2.79%)Rejected-Finance 5D 95 VRINDAVAN YOJNA RAEBARELI ROAD LUCKNOW UP 226 029 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226029 | L2 | Rejected-Finance Being Higher bid | |
| 3 | L3₹74.6 L+₹8.5 L (12.9%)Rejected-Finance 114 BARI BAZAR SADAR CANTT LUCKNOW UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | L3 | Rejected-Finance Being Higher bid | |
| 4 | Rejected-Technical | - | Rejected-Technical Adverse remark in WLR |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
15 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Lucknow
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
REPAIR / MAINT OF THE ROADS IN THE AREA OF AGE BR II UNDER GE WEST LUCKNOW
2023_MES_588322_1
CWE/LKO/W/T-01 OF 2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE West Lucknow
₹1.6 L
Yes
22 Jun 2023
5 Apr 2023
17 May 2023
5 Apr 2023
15 May 2023
2 May 2023
5 Apr 2023 - 26 Apr 2023
Amount
Repair to pot holes any depth not exceeding 1.0 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm the depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in screened & graded road metal, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded well rammed (including supply of road metal, binder and chippings).depth of potholes exc 30 mm complete all as specified and directed
Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade (80-100 penitration ) @ 5 Kg /10 sqm with tar boiler all as specified and directed.
M & L for Bitumenous premix asphaltic semi dense concrete 30 mm thick consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade (50-70 penitration) binder content by weight of total mix rolled and compected to required camber and gradient complete all as specified and directed by Engineer-in-charge. (To be prepared in hot mix plant and to be laid trough machanical paver). Note: (a) Preparation of mix in hot mix plant spreading by self propelling mechanical paver and rolling and compection by set of rollers as specified in PS shall be camed out. Hot mix plant may be installed at any distance but the Contractor shall be responsible for maintaning the required temprature of mix under all conditions till it is laid and compected. unit rate against these items shall be include for carrying and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN as per SSR Part-I clause No-20.B.4. (c) Making suitable speed breakers/ Humps as per specification laid down in IRC-99.complete all as directed
Demolition of Cement concrete (unreinforcde) Concrete of any description and in any position not otherwise specifically provided for complete all as specified directed
M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed
M & L for 50 mm thick sand cushioning including spreading, levelling and compacting as in base (cushion) for laying PCC interlocking paver blocks complete all as specified and directed:
M & L for factory made machine pressed precast 60mm thick PCC inter locking paver blocks M-35 grade using grey cement and pigment as design & pattern approved by GE as in hard standing and filling of joints with fine sand complete all as specified and directed:
M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. Exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint with glass beads of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
Supply and fixing cat eye solar reflective type l body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.
Scarifying or picking gravelled macadam or bituminous macadam surfaces area n exc 400 sqm and depth exc 50mm and not exc 100 mm complete all as specified and directed.
M & L for 150mm thick (compacted thickness in two layers) WBM with coarse aggregate of grading 2 (63 mm to 40mm size) and second layer of grading 3 (50mm to 20mm size ) with granite trap or basalt sread rolled and consolidated to required gradient and camber complete all as specifed and directed.
M&L for preparing WBM surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 10.00 kg per 10 sqm complete all as specified and directed.
BAJAJ CONSTRUCTION
M/s Ram Singh Agarwal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .