PETTY REPAIR TO BLDG INCLUDING BR AND ELECTRICAL WORKS UNDER ZONE A AT NDA KHADAKWASLA

Amount

S & f in repair MS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 100 mm complete all as specified and directed.

S & f in repair Continuous piano hinges MS of size 30mm with bright finish or electro galvanised complete all as specified and directed.

S & F in repair extruded brass alloy handle, fabricated type polished bright, 100mm long, of shape complete all as specified and directed

S& F in repair extruded brass alloy handle, fabricated type polished bright, 150mm long, of shape complete all as specified and directed

S & F in repair extruded aluminium alloy handle 'D' Type fabricated type anodized 150 mm long complete all as specified and directed

S & F in repair extruded aluminium alloy handle 'D' Type fabricated type anodized 100 mm long complete all as specified and directed

S & F in repair only Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed

S & F in repair decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed

S & F in repair Brass barrel tower bolt heavy, 100mm ,bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

S & F in repair Brass barrel tower bolt ,heavy, 150mm ,bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

S & F in repair Brass barrel tower bolt, heavy 200mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

S & F in repair Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed

S & F in repair Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed

S & F in repair 40mm dia,brass, polished cupboard/door knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed

S & F in repair floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed

S & F in repair door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places screw complete all as specified and directed

S & F in repair steel curtain rod fancy type 25mm (Heavy) dia fixed including brackets and end stops complete all as specified and directed

S & F in repair steel curtain rod fancy type 20mm (Heavy) dia fixed including brackets and end stops complete all as specified and directed

S&F in repairs Fancy type knobs for curtain rod ends fixed to wall/ chowkhat as per site reqirement complete all as specified and directed

S&F in repair T type brackets decorative type powder coated suibable for 20 mm dia complete all as specified and directed

S&F mild steel curtain rod brackets 'L' type suibable for 15 / 20 mm dia complete all as directed

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary, necessary grinding, sanding, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and directed

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed

S & F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and directed

S & F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5 Sqm in each pane complete all as specified and directed

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed

All as per item No 2 above but exc 1 Sqm and n.exc 2 Sqm each as directed.

S&F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats second class hardwood complete all as specified and directed

S&F 35mm thick second class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), with synthetic enamal paint complete all as specified and directed

S & F second class soft wood Weather boarding, clean sawn, thickness 20mm to 25mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed

S&F second class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq cm & n exc 6 sqcm complete all as specified and directed

S&F second class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and directed

M&L for painting two coats of Synthetic enemal paint over a coat of pink primer on new wooden surfaces complete all as specified and directed

S & F in repair Asbestos cement plain building boards 4mm thk, fixed to timber framework with screws complete all as specified and directed

S & F in repair 12mm thk Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed

Supply only 12mm thick ditto but prelaminated both sides with decorative choice laminations complete all as specified and directed

S & F stainless steel wiremesh 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete complete all as specified and directed

S & F Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete complete all as specified and directed

S & F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed

S & F in repair for rubber strip 50 mm wide and 3 to 5 mm thick as in door bottom complete all as specified and directed

S & F in repair soap dish any type fixed to plug with chromium plated brass screw complete all as specified and directed

S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screwsand wooden/plastic cleats (Minimumweight 90gms)

S & F in repairs helical door spring 150mm mild steel with steel wire spring stove enamelled blackcomplete all as specified and directed

S & F in repair heavy duty CP towel rack 600mm long fixed on wall complete all as specified and directed

S & F in repair powder coated peg set of six hook on wall/ shutter complete all as specified and directed

S & F in repair Hat and coat hooks, solid body, 175mm to 250 mm made up of brass complete all as specified and directed

S & F in repair powder coated peg set of four hook on wall/ shutter complete all as specified and directed

S & F in repair glass shelf assembly consisting of 8- 10 mm thick glass sheet glass shelf 12 cm wide with CP bracket , stainless steel guard railing, 60 cm long complete all as specified and directed

S & F in repair good quality corner glass 8 to 10 mm thick glass sheet 30 cm size with railing around complete all as specified and directed

S & F in repair "F" type bracket of 100mm for fixing of Glass shelf and Corner glass complete all as specified and directed

S & F in repair 1mm thick stainless steel kitchen plate rack of size 3'x3' complete all as specified and directed

S & F in repair sink made of stainless steel 1mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 495 x 420 mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed

S & F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete inclusing taking down existing all as specified and directed

S & F 110mm dia PVC (SWR) bends any radius complete all as specified and directed

Dismantling of cast iron 100 mm bore pipes jointed in cement motar including all fittings

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes complete all as specified and directed

S&F CI bend 100 mm bore with oval access door complete all as specified and directed .

S & F 100 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches complete all as specified and directed

S&F CI cowl 100 mm size complete all as specified and directed

S & F 110mm dia PVC (SWR) junction single(single T) complete all as specified and directed

S & F 110mm dia PVC (SWR) branch piece, single (single Y) equal orunequal complete all as specified and directed

S & F 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S & F 75mm dia PVC (SWR) bends any radius complete all as specified and directed

S & F in repair PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete all as specified and directed

S & F in repair 32mm dia brass chromium plated waste coupling for wash hand basins complete all as specified and directed

S & F in repair flush handle suitable for low level flushing cistern of 10 ltrs capacity complete all as specified and directed

S & F in repair 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and directed

S&F in repair flush rubber waser suitable for low level flushing cistern of 10 ltrs capacity complete all as specified and directed

S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and directed

S & F in repair for providing long body bib taps with wall flange ,cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule,complete all as specified and directed

S&F in repair double angular cock 15mm dia complete all as specified and directed

S & F in repair health faucet length of tube 1.50m complete all as specified and directed

S & F in repair chromium plated 2 in 1 wall mixer with provision for both telephone shower and over head shower with 115mm long bend pipe and wall flange complete all as specified and directed

S & F in repair chromium plated 2 in 1 wash basin mixer wall flange complete all as specified and directed

S & F in repair for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia complete all as specified and directed .

S & F in repair 32mm dia waste coupling of PTMT (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and directed

S & F in repair 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S & F in repair brass chromium plated shower rose 125mm size complete all as specified and directed

S & F in repair plastic water closet seat, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S & F in repair fastners of size 125 mm for fastening in wall for WHB etc complete all as specified and directed

S&F in repairs Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) for bore dia of pipe 15mm complete all as specified and directed

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm - 90gms /20mm -125gms). for bore dia of pipe 15mm complete all as specified and directed

S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) for bore dia of pipe 15mm complete all as specified and directed

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed. .

All as per item No. 89 above but 20mm dia pipes.

S & F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc 15 mm bore pipe.

S & F galvanised mild steel medium grade tubes 20mm dia bore with all fittings and fixed to wall, floors etc complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe

S&F unplasticised PVC pipes if pressure rating 10kgf/cm2 fixed complete to wall, ceiling or in floor etc., pipe size 15mm complete all as specified and directed.

S&F unplasticised PVC pipes if pressure rating 10kgf/cm2 fixed complete to wall, ceiling or in floor etc., pipe size 20mm complete all as specified and directed.

S&F in repair PVC flush tank ball cock set complete all as specified and directed.

S&F in repair CP grating 100 mm dia with hole /or without hole, round, fix on floor / nahani trap complete all as specified and directed.

S&F in repair spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.

Repair / Maintenance to aluminium doors / windows, requiring carpentry work and carrying out minor repairs such as tighting of screws/nails, readjuset the frame / Rail / Glass etc including taking up or down the panel and replacing of defective items complete all as specified and directed. Note : Cost of spares replaced against above mentioned item will be measured & paid separately under respective items of Sch "A/BOQ"

Supply only powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing , glazing clips etc. complete all as specified and directed.

Supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutycomplete all as specified and directed.

Supply only sheet glass 5.50mm thick ordinary or tinted as per site complete all as specified and directed.

S&F in repair brass mortice lock,100mm, 4 liver verticle type complete all as specified and directed.

M & L for replacement of tiles in wall / dado / skirting as in patch work to match the damaged area with existing tiles colour & size incl 10mm thick cement plaster in CM 1:4 . Size of each tiles exc 0.01 sqm each but n exc 0.36 sqm, complete all as specified and directed.

M & L for replacement of floor tiles in patch work set and jointed in neat cement slurry and pointed in white or coloured cement to match the damaged area with existing tile, (colour, size and other discriptions) etc laid bedded over 20mm thick CM (1:6) bedding. Size of each tiles exc 0.09 sqm each but n exc 0.36 sqm of each tile, complete all as specified and directed.

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights incuding switches etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps, switches, sockets, ceiling roes, etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn, MES Colony/MES installations & Bombay stadium/PTT area. (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

Supply only following spares for light fittings of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- (a) Spring loaded G13 side holders (set of 2) suitable for 36/40W FTL fitting

(b) All as per item no. 108 above but PVC /polycarbonate lamp holders batten/Angle type

© Supply only switch piano flush type 5 Amps SP one way all as specified.

(d) Supply only switch piano type 15 Amps SP one way all as specified.

(e)Supply only socket 5/6 Amps flush mounted 3 pin all as specified.

(f) Supply only socket 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

(g) Supply only ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body.

S&F in replacement modular step type fan regulator 120W, 2 module, complete all as specified and directed.

S&F in replacement modular switch piano type 10 amps one way one module, complete all as specified and directed.

S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed.

S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement of 1 module Blanking plates complete all as specifed and directed

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided complete all as specified and directed.

S&F in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed.

S&F in replacement bell push, flush type 5 Amps complete all as specified and directed.

S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed

M&L for point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) All as per item no. 129 above but One 3 pin 6 Amps socket out let point on independent board

(c ) All as per item no. 129 above but One 3 pin 6 Amps socket out let point on same board.

(d) All as per item no. 129 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all specified and directed.

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 1.5 sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size 1.5Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts, complete all specified and directed.

(b) All as per item no. 134 above but One 3 pin 6 Amps socket out let point on independent board.

(c ) All as per item no. 134 above but One 3 pin 6 Amps socket out let point on same board.

(d) All as per item no. 134 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 4sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size 4 Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed.

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete as specified and directed.

S&F flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping /conduit shall be measured as one RM

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

S&F 1100 volts grade heavy duty cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down of existing complete all as specified and directed.

S&F in replacement factory made epoxy powder coated Distribution Board TP&N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed. Note: MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and making good distrubed surface and touch up with the same fineshes complete all as specified and directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

All as per item no 148 above but 08 way SPN DB (Double door)

All as per item no 148 above but 04 way SPN DB (Single door)

All as per item no 148 above but 04 way SPN DB (Double door)

All as per item no 148 above but 02 way SPN DB (Single door)

S&F distribution box 18 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, qty-1 nos, MCB SPN 06 Amp 230V, 50 HZ, complete all as specified and directed Make: Legrand Catpart No.601835 or equivalent in make as mentioned at makes list in PS

S&F in replacement of MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed

S&F in replacement of MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

S&F in replacement of C Curve MCB TP 63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

Supply and fix in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed. Make:Tibcon/Epcos

Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed.. Make:SKF

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given by the site-in-charge

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position all as directed by Engineer-in-charge for following :- (a) Celling fan of size 1200 sweep.

All as per item no. 165 above but Exhaust fan of 300 mm sweep.

All as per item no. 165 above but wall mounted fan of 400 mm sweep.

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades complete all as specified and directed.

All as per item no. 168 above but exhaust fan of size 12" (300 mm) sweep

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and directed.

S&F in replacement of high speed wall mounted fan of sweep 400 mm, full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed.

S&F in replacement of Plastic ventilation fan of 200 mm/250mm sweep BLDC, engery efficient inclduing replacing the plywood as per the site requirement. (Note: Old Exhuast fan should be deposited in MES store yard)

S&F in replacement of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed. (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj MAXX AIR/ Crompton Greaves Trans Air/ Havells VENTILAIR DB NEO or equivalent makes as mentioned at makes list in PS

S&F in replacement of Metal body ventilation fan of 300 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj MAXX AIR/ Crompton Greaves Trans Air/ Havells VENTILAIR DB NEO

S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc complete all as specified and directed.

S&F in replacement metal clad plug top 3 pin,10Amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 5/6 amps, 230 volts, ISI marked complete all as specified and directed.

S&F in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 0.5 sqmm all as specified and directed

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1 sqmm all as specified and directed

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed

S&F in replacement PVC insulated cable 3 core stranded copper conductor 6 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed

S&F for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge.

S&F in replacement 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as directed.

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement LED building security light fiitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed by Engr-in-charge. Make- Luker LSTE-30/ Havells ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC / Wipro LR02-331-XXX-57-XX or equivalent makes as mentioned at makes list in PS Note: Old security light should be deposited to MES store

S&F in replacement 1x20 watt, 230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed . Make: Luker LTGT520 or or equivalent makes as mentioned at makes list in PS

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH or equivalent makes as mentioned at makes list in PS

S&F in replacement of 36 watt, 230V surface and wall mounted LED batten, IP65 rated protection suitable for outdoor application with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. Make- Luker LTOD40 or equivalent in as mentioned at makes list in PS

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders all as specified and directed

S&F in replacement 1x18/20W, 230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed. Make- Luker LLTS1 or equivalent in as mentioned at makes list in PS

S&F in replacement 40 W suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting complete all as specified and directed. Make: Havells Cat part No. CONSTA1144LP40WLED840SPCWH or or equivalent makes as mentioned at makes list in PS

S&F in replacement Decorative wall mounting brushed nickel fixture suitable for B22 base bulb upto 14 watt including 01x10 W LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed. Make: Halonix catpart no.HLWB-01-B22 or equivalent in as mentioned at makes list in PS

S&F in replacement 1x10 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed. Make - Luker Cat part no. LBKRDSL10 /Havells INTEGRANEOSURFA CEDLS10WLED857S or equivalent in as mentioned at makes list in PS

S&F Electronic driver suitable for 25 watts LED building security light fittings as per existing make complete all as specified and directed

S&F in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make: Luker Cat Part: LPS40 or equivalent makes as mentioned at makes list in PS

S&F in repalcement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. Make: Luker cat part no. LDR20 or equivalent in as mentioned at makes list in PS

S&F 200 watt integral SMD LED Highbay luminaire with aluminium reflector light fitting incl with inbuilt electronic drivers, necessary hanging arrangements as per site requirement including taking down the existing one all as specified and directed Make Luker Cat part no. LOHY200 /Havells BAYBRITESAUCERHBP200WLED757WBTOLTG/or equivalent makes as mentioned at makes list in PS Note: 1. Ladders /Cranes shall be used and will be provided by contractor for dismantling /fixing of light fittings at roof and cost for the same is deemed to be included.

S&F in replacement of Picture light LED (warm white) fitting of 1x12 Watt individual LED lenses bronze coloured complete all as specified and directed. Make: PHILIPS 919216000000 12W Picture Light, Bronze or or equivalent makes as mentioned at makes list in PS

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base E27 complete all as specified and directed.

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base E14 complete all as specified and directed.

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base B22 complete all as specified and directed.

S&F in replacement of Electronic driver for 20 watts Ceiling lights as per the existing make complete all as specified and directed.

S&F in replacement of PVC unbreakable surface boxes of size 4"x4".complete all as specified and directed.

S&F in replacement of PVC unbreakable surface boxes of size 6"x6" complete all as specified and directed.

S& F in replacement of PVC unbreakable surface boxes of size 4"x7" complete all as specified and directed.

S& F in replacement of PVC unbreakable surface boxes of size 6"x8" complete all as specified and directed. .

S& F in replacement of PVC unbreakable surface boxes of size 8"x10" complete all as specified and directed.

S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified and directed. . Make:As per the sample given

S&F in replacement for white cover plate with frame 3 module complete all as specified and directed. . Make:As per the sample given

S&F in replacement for white cover plate with frame 4 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 6 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 8 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 12 modulecomplete all as specified and directed. .Make:As per the sample given

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module.complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and directed.

S&F Stationary type electric water heater closed/vented type , inner body made out of copper of capacity 25 Litres suitable for 230 volts, single phase AC 50 HZ Supply ISI marked to IS;2082 (Part /1993) (reffirmed 2004) with latest amendments and having BEE Star (5 Star Rating) complete with all accessories and fittings as per requirement and depositing old water heater of any type and capacity to MES Store yard complete all as specified and directed by Engr-in-charge.

Taking down carefully and refixing geyser of any size/make with necessary fastners/clamps and making good any disturbed surface all as specified and directed

Disconnecting and taking down existing userviceable geyser of 25 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place all as directed Note : .Cost of spares such as will be measured and paid for separately under respective Item of sch A as supply only.

Supply only thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

Supply only thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

Supply only heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge

suply only flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket. complete all as specified and directed.

S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

S&F in replacement of neon lamp indicator square/round type after taking out old incl taking down old one complete all as specified and directed. .

S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed.

S&F in replacement thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed..

S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed..

S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided complete all as specified and directed.

S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and directed..

S & F in replacement of CPVC pipes of size outer dia 16 mm with all standard fittings such as suitable size of MS clamps, screws, hooks, Elbow, bends, tees etc complete all as directed.

S&F in repairs 15mm bore bib taps, fancy type, cast chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

OM GANESH CONSTRUCTION