Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹35.5 L+₹74,020 (2.13%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹37.0 L+₹2.2 L (6.35%)Rejected-Finance 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹37.7 L+₹2.9 L (8.43%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹38.0 L+₹3.2 L (9.23%)Rejected-Finance 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW, PIN 226002, C/O 56 APO
REPAIR/ MAINT OF ALL TYPE OF MAP FURNITURE UNDER GE (WEST) LUCKNOW
2024_MES_670631_1
GE/W/LKO/53 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (WEST) LUCKNOW
₹80,000
Yes
5 Nov 2024
3 Sept 2024
8 Oct 2024
3 Sept 2024
1 Oct 2024
17 Sept 2024
3 Sept 2024 - 10 Sept 2024
Amount
TABLE DINING 1200X900X760MM (4 PERS) DRG NO : FD/MAP/03 (For Item No 1 to 6) Taking out old unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board ext grade , ISI Marked IS-3087-1985 bonded with Phyol Pharmeldihide with one side teak face and other side white of exterior grade quality including with 4 mm thick teak wood beading all round the top complete as specified and as shown on drg.
Taking down U/S legs and S&F new legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified and shown on drawing .
Same as item No. 01 but top long rail front or back complete all as specified and as shown on drg.
Same as item No. 01 but top short rail for sides complete all as specified and as shown on drg.
Provision of Konia (wooden Bracket) of size 4"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and as shown on drg.
Preparation of surface with sand paper after scrubbing and apply two coat of French Polish glossy finish to table with drawers with and including to the parts repaired/replaced under item No 1 to 5 to the required gloss to match with the existing complete all as specified and as shown on drg.
TABLE DINNING 1500 x 900 x 760 mm (6 PERS) DRG No FD/MAP-II/03 (For Item No 7 to 12) Taking out old unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board exterior grade, ISI Marked IS-3087-1985 bonded with Phyol Pharmeldihide with one side teak face and other side white of exterior grade quality including with 4 mm thick teak wood beading all round the top complete as specified and as shown on drg.
Taking down U/S legs and S&F legs of size 90x45mm front/rear left/right made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified as shown on drawing.
Same as item No. 7 but top long rail front or back complete all as specified and as shown on drg.
Same as item No. 7 but top short rail for sides complete all as specified and as shown on drg.
Provision of Konia (wooden Bracket) of size 4"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and as shown on drg.
Preparation of surface with sand paper after scrubbing and apply two coat of Malamine Polish glossy finish to table with drawers with and including to the parts repaired/replaced under item No 7 to 11, to the required gloss to match with the existing complete all as specified and as shown on drg.
REPAIR TO CHAIR DINING: DRG No - FD/E6/MAP/10 (For Item No 13 to 20) Taking out of old broken joints and removing of old ply from seat of chair and S&F new 12 mm BWR phenol formeldehyde resin bonded plywood with permissible moisture contents as per shape and size complete all as specified and as shown on drawing.
Same as item No 13 but front and rear legs size 30x40 1st class teak wood complete all as specified and shown in drawing.
Same as item No 13 but stiffener size 20x25 mm 1st class teak wood complete all as specified and shown in drawing.
Same as item No 13 but all side rail size 65x25 mm 1st class teak wood complete all as specified and shown in drawing.
Same as item No 13 but nylon buffers complete all as specified and shown in drawing.
Taking out U/S foam of chair dining and S&F new 75 mm thick 40 density foam with fabric on seat of new 12 mm thick ply BWR Grade duly covered with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per metre .
Taking out U/S foam of chair dining and S&F new foam 40 density and 450MMx450MMX75MM and covered with tapestry cloth of approved quality duly fixed with 12 MM thick Plywood BWR Grade complete all as specified and shown on drawing. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per meter .
Scraping of old polishing with sand paper/Grinder and prepare surface to apply two coat of Malamine Polish glossy finish to complete Chair repaired /replace under item No 13 to 16 to the required gloss and colour complete all as specified and as directed.
TABLE COMPUTER DRG No FD/E6/MAP/03: (For Item No 21 to 29) Taking down U/S Top & S &F new top made of 18/19mm prelaminated MDF Board exterior grade quality including with 4 mm thick oval beading duly polished and all as specified and as shown on drg.
Taking down U/S drawer with SS Chanel and S & F drawer with SS Channel 12/14", MDF Board exterior grade made of 18/19 mm thick Make : Centuryply,Greenply & Archidply with 4 mm thick oval beading and drawer 75mm deep on telescope channels duly polished and all as specified and as shown on drg.
Taking down U/S Key board with SS Chanel and S & F new Key board tray (450 x 480) with SS Channel 12/14" MDF Board exterior grade made of 18/19 mm thick Make : Centuryply,Greenply & Archidply with 4 mm thick oval beading and drawer 75mm deep on telescope channels duly polished and all as specified and as shown on drg.
Taking out U/S bottom shelf and S & F bottom shelf made of 18 mm thick bothside pre laminated MDF board exterior grade with 4 mm thick oval beading duly polished and all as specified and as shown on drg.
Taking out U/S vertical board and S & F vertical board made of 18 mm thick bothside pre laminated MDF board exterior grade with 4 mm thick oval beading duly polished and all as specified and as shown on drg.
Taking down U/S Mouse tray with SS Channel and S & F mouse tray with 12/14" SS Channel made out of 18 mm thick bothside pre laminated MDF Board with 4 mm thick oval beading and 75mm deep om telescopic channels duly polished and all as specified and as shown on drg.
Taking down U/S handle and S & F handle and shape exists all as complete as specified as showm on Drg.
Provision of Konia (GI Bracket ) of stainless steel in between of every joint of the table fixed with screw to provide more strength complete all as specified and as shown on drg.
Scraping of old painting with sand paper/Grinder and prepare surface to apply two coat of black paint of Berger/Asian and polishing glossy finish to complete table computer repaired /replace under item No 21 to 28 to the required gloss and colour complete all as specified and as directed.
CHAIR COMPUTER DRG No FD/MAP/01: (For Item No 30 to 37) Taking down U/S updown lever and S & F Up Down adustable lever with size and shape exists complete all as specified as shown on drg.
Taking out U/S back and S & F back of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S seat and S & F seat of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S hydrolic jack for and S & F seat of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S tapestry cloth of seat and S & F tapestry cloth on seat of computer chair approvel quality duly sitched complete all as specified on drawing.
Taking out U/S coaster wheel and S & F coaster wheel of twin of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S hand rest and S & F hand rest of twin of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S Pedestal assy and S & F of new Pedestal assy injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin of press fitted to each prong for holding the castors complete all as specified and as directed.
CHAIR SCHOOL WITH HAND BOARD DRG No FD/E6/MAP/05: (For Item No 38 to 41) Taking out U/S hand board and S & F hand board made of 18/19 mm thick MDF board Exterior grade Make : Centuryply, Greenply, and Archidply with size and shape exists and all as complete as spceified as shown on drg.
Taking out U/S seat and S & F one piece PVC back & seat size and shape exists complete as secified as shown on drg. Incl 4 Nos of stainless steel screen of size 6 x 10x50mm long complete all as specified and as directed.
Taking out U/S rubber shoe and S & F Rubber shose size and shape exists all as shown on drg.
Supply and Fixing 4 Nos of stainless steel bolt size 10x50mm long one side flat for fixing of shelf under the seat (GI Frame for books) complete all as specified and directed.
CHAIR WRITING OFFRS DRG No FD/E6/MAP/12 : (For Item No 42 to 48) Taking down U/S front seat and S & F new front seat of chair writing with size and shape exists complete all as specified as shown on drg."
Taking down U/S Back seat and S & F new Back seat of chair writing with size and shape exists complete all as specified as shown on drg.
Taking out U/S tapestry cloth of seat and back same new S&F tapestry cloth on chair writing approvel quality duly sitched complete all as specified and as directed.
Taking out U/S arms and S & F new armrest made of black internal with shin of chair writing with size and shape exists complete all as specified as shown on drg.
Taking out U/S stifner and S & F stifner made 5mm thick MS flat iron for fixing of seat size and shape all as complete all as specified as shown on drg.
Same as item No 42 but joint the stiffner with welding work all as specified and shown in drawing.
Preparation of surface and two coat of enameld paint black over a coat of red oxide primer complete all as secified and shown on drg.
CHARPOY IP FOLDING PLY TOP DRG No : FD-388® (For Item No 49 to 51) Taking out U/S ply top and S & F ply top made of 8 mm thck BWR ply complete as shwon on drg.
Welding of broken joints including legs which shall be fixed with frame by nut and bolts of size as exists all as as specified and shown on drg.
Preparation of surface and two coat of enameld paint black over a coat of red oxide primer complete all as secified and shown on drg.
TEAPOY VERANDAH DRG No : FD/E6/MAP/17: (For Item No 52 to 54) Taking out U/S top and S & F top made of 18 mm thick pre laminated MDF board of exterior grade top with PVC edge around and size and shape as exists and all as complete as shown on drg.
Taking out bottom tray and S & F bottom tray made of 5 mm thick ms bar base tray with size and shape exsits complete all as secified and as shown on drg.
Preparation of surface and two coat of enameld paint black over a coat of red oxide primer complete all as secified and shown on drg.
TABLE BED SIDE DRG No : FD/E6/MAP/15(R) :(For Item No 55 to 61) Taking down old unservicable top and S&F new Top of table bed side shall be made of 18/19 mm prelaminated MDF board of exterior grade ISI Marked IS-3087-1985 with one side teak colour and other side white exterior grade complete all as specified and as directed.
Taking out U/S upper drawer and S & F drawer made of 12 mm thick ply, BWR grade with and all as specified and as shown on drg.
Taking out U/S MS legs and S & F legs of size and shape exists all as complete shown on Drg.
All items as per Table bed side but lower drawer complete all as secified and as shown on drg
Fixing of new stiffner made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents size 400mmx50mmx25MM complete all as specified and as directed.
Taking down U/S handle and S & F handle and shape exists all as complete as specified as showm on Drg.
Scraping of old painting with sand paper/Grinder and prepare surface to apply two coat of black paint of Berger/Asian and polishing glossy finish repaired /replace under item No 52 to 57 to the required gloss and colour complete all as specified and as directed.
TABLE PEG DRG No FD/MAP/11: (For Item No 62 to 66) Taking out unsv legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified and as directed.
Same as per Table Peg Drg No - FD/MAP/11 but long rail /short rail complete all as secified and shown on drawing.
Taking out old UNSV stiffener and Supply & Fixing of same 1st class teak wood complete all as specified and shown in drawing.
Taking out old unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board of exterior grade ISI Marked IS-3087-1985 bonded with Phyol Pharmeldihide with one side teak colour and other side white exterior grade complete all as specified and as directed.
Scraping of old polishing with sand paper/Grinder and prepare surface to apply two coat of Malamine Polish glossy finish to complete Table Peg repaired /replace under item No 55 to 58 to the required gloss and colour complete all as specified and as directed.
TABLE DRESSING LADIES WITH MIRROR DRG No FD/MAP-II/07: (For Item No 67 to 83) Taking out old unserviceable mirror with frame and Supply and fixing looking mirror of size 1200x380mm, 5mm thick duly framed with 1st class hard wood teak (MP) and back of mirror covered with 6mm thick BWR ply wood ,IS-303 grade complete all as shown on drawing and as specified.
Taking out old broken glass and S & F 5 mm thick glass pane duly slotted for sliding purpose with size & shape as exists complete all as specified and as shown on drgs.
Taking down old legs and S & F new leg of 1st class hard wood teak (MP) free from knots, cracks etc. with permissible moisture with shape and size as exists complete all as specified and as shown on drawing.
All item as per Table Dressing Ladies but front side of drawer complete all as specified and as shown on drawing.
Taking down old back & sides of drawers and S & F back & sides of drawer made of 12mm Ply wood BWR grade, IS-303 with size and shape as exists complete all as specified and as shown on drgs
All table dressing ladies but back of drawer short rail complete all as specified and as shown on drawing.
Taking down unserviceable bottom ply wood 6mm of drawers and S&F new ply wood 6mm BWR grade ISI Marked,IS-303 grade as per required size complete all as specified and as directed.
Taking down old top and S & F new top of table of 18/19mm thick prelaminated MDF board of exterior grade one side teak face and other side balancing white with shape and size as exists complete all as specified and as shown on drawing .
All as per item No, 66 but bottom of table dressing ladies complete all as specified and as shown on drawing.
All as per item ser No, 66 but sides of table dressing ladies complete all as specified and as shown on drawing.
Taking down old unserviceable bottom frame and S & F new frame with legs made of 1st class hard wood teak (MP) free from knots ,cracks etc with permissible moisture contains as per shape and size as exists complete all as specified and as shown on drawing .
Taking down unserviceable shutter and S & F new shutter made of 18/19 mm thick pre laminated MDF board exterior grade of size and shape as existing complete all as specified and as shown on Drg.
Taking out of old broken joints and removing of old ply from stool of table dressing ladies and S&F new 12 mm BWR phenol formeldehyde resin bonded plywood with permissible moisture contents as per shape and size complete all as specified and shown in drawing.
M&L for taking out old unserviceable seat of foam cushion and Supply and fixing new seat of foam cushion of size 370x325x75mm 40 density duly covered all as specified and as shown on drawing No FD/MAP II/07.
Taking out U/S tapestry cloth of stool seat and S & F tapestry cloth on seat of stool approvel quality duly sitched complete all as specified on drawing and directed.
Taking out U/S coaster wheel and S & F coaster wheel of stool dressing with size and shape exists complete all as specified as shown on drg.
Scraping of old polishing with sand paper/Grinder and prepare surface to apply two coat of Malamine Polish glossy finish to complete Table Dressing Ladies repaired /replace under item No 67 to 76 to the required gloss and colour as directed.
TV TROLLY DRG No : FD/E6/MAP/04: : (For Item No 84 to 90) Taking out U/S top/bottom S & F top made of 18/19 mm thick bothside pre laminated MDF board exterior grade (Make- Centurply/ Greenply/ Archid Ply) top with edge moulded all around and size and shape as exists and all as complete as shown on drg."
M&L preparation of surfaces by sand papering and cleaning and polishing with french polish upto the required finish all as specified on drawing and directed.
Taking out U/S side board and S & F side board made of 18 mm thick bothside pre laminated MDF board exterior grade top with edge moulded all around and size and shape as exists and all as complete as shown on drg.
Taking out U/S back board and S & F back board made of 18 mm thick bothside pre laminated MDF board exterior grade top with edge moulded all around and size and shape as exists and all as complete as shown on drg.
Taking out U/S glass shutter and S & F glass shutter made of 5.5 mm thick openable with magnetic catcher as exists and all as complete as shown on drg.
Taking out U/S coaster wheel and S & F coaster wheel of twin of TV Trolly with size and shape exists complete all as specified as shown on drg.
Taking out U/S magnetic catchaer and S & F magnetic catcher of TV Trolly with size and shape exists complete all as specified as shown on drg.
HARD BED STEEL DRG No FD/MAP/E6/08 (R) : (For Item No 91 to 98) Taking down old unserviceable Ply Top and S & F New Ply top made of 12 MM thick commericail BWR Ply ISI : 303 complete all as specifed and as shown on drg.
Taking out unserviceable head board and S & F new head board made of 18/19 MM thick both side pre lamineted MDF Board of exterior grade and including 4mm thick teak wood beading alround with size and shape all as per specified and as shown on drg.
Taking out unserviceable foot board and S & F new foot board made 18/19 MM thick both side pre lamineted MDF Board of exterior grade and including 4mm thick teak wood beading alround with size and shape all as per specified and as shown on drg.
Taking out unserviceable long rails of bed hard steel and supply and fixing new long rails made of 25 X65 mm MS Retangular 18 Guage welded with short rails on bed hard steel size and shape all as specified and as shown on drg.
Taking unserviceable short rails of bed hard steel and supply & fixing new short rails made of 25X65 mm MS Retangular 18 Guage welded with long rail on bed hard steel size and shape all as shown on drg.
Taking out unserviceable legs and S & F new legs made of 38 x 38 mm MS squrare pipe 18 Guage welded with frame of bed hard steel complete all as spceified and shown on drg.
Taking out U/S hard rubber shoe and S & F rubber shoe of size and shape all as shown on drg.
Preparing of surface with sand paper after scrubbing paint to bed hard steel including all parts repared/repleced under item No 91 to 96 applying Two coats of enamled paint over a coat of red oxide primer after cleaning te surface complete all as per specified and as shown on drg.
CHARPOY WITH HARD TOP DRG No FD/MAP-II/01 : (For Item No 99 to 104) Taking down old unserviceable Ply Top and supply and fixing New Ply top made of 12 MM thick BWR Grade Ply ISI : 303 complete all as specifed and as shown on drg.
Taking out unserviceable long rails ofcharpoy ms ply top and supply and fixing new long rails made of 25 X65 mm MS Retangular 18 Guage welded with short rails on charpoy ms ply top size and shape all as specified and as shown on drg.
Taking unserviceable short rails of charpoy ms ply top and supply & fixing new short rails made of 25X65 mm MS Retangular 18 Guage welded with long rail on charpoy ms ply top size and shape all as shown on drg.
Taking out unserviceable legs and supply and fixing new legs made of 38 x 38 mm MS squrare pipe 18 Guage welded with frame of charpoy ms ply top complete all as spceified and shown on drg.
Taking out U/S hard rubber shoe and supply and fixing rubber shoe of size and shape all as shown on drg.
Preparing of surface with sand paper after scrubbing paint to bed hard steel including all parts repared/repleced under item No 90 to 92 applying Two coats of enamled paint over a coat of red oxide primer after cleaning te surface complete all as per specified and as shown on drg.
HAT STAND WITH MIRROR (Drg No FD-233 & FD-3622): (For Item No 105 to 110) Taking down old unserviceable frame and supply and fixing frame of size 710x1000mm with 4mm thick teak face ply in front side and shall be covered with 4mm thick commercial ply on back side complete all as specified and as shown on drgs.
Taking down of U/S mirror and teak wood beading and S&F new mirror of size 300x460x5mm and teak wood beading 10x12mm provided vertically top/bottom vertically (Side) shall be fixed on right hand as shown on drg.
Taking down of U/S hanging MS Plate and S&F new MS Plate of best quality complete all as specified and directed.
Taking down of U/S Brass peg and S&F new Brass peg of Size 75x120mm best quality complete as specified and directed.
Taking down of U/S Aluminium peg and S&F new Aluminium peg peg of Size 75x120mm best quality complete as specified and directed.
Preparation of surface with sand paper after scrubbing and French polishing to hat stand , with and including to the parts repaired/ replaced under item No 105 to 106 to the required gloss to match with the existing complete all as specified and as shown on drg.
BIN LINEN MULTIPURPOSE :DRG NO - FD/E6/MAP/09: (For Item No 111 to 121) Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size applying duly two coat of French polished to match existing surface complete all as specified and shown on drg.
All as item No 111 above but bottom frame of size 1060x 290x 25x 45mm complete all as specified and shown on drg.
Taking down old unserviceable drawers and supply and fixing new drawer made of 12mm thick ply BWR with size and shape as exists complete all as specified and as shown on drg.
Taking down old unserviceable Top and supply and fixing New top made of 18/19 mm thick prelaminated MDF Board (exterior Grade). Complete all as specified and as shown on drg.
Taking down U/S partition and S&F new partition of MDF board of size 610x460mm x18mm complete all as specified and as shown on drg.
All as per item ser No. 114 but top or bottom of size 1220x455mm x18mm complete all as specified and shown on drg.
Taking down old unserviceable back ply and supply and fixing new ply of size 1220x635mm, 6mm thick commericial BWR grade, IS-303 grade complete all as specified and as shown on drg.
All as item No 111 but side of size 645 x 455mm complete all as specified and shown on drg.
All as per item No.111 but shelf of size 425x770 complete all as specified and shown on drg.
Taking down old unserviceable Handle and supply and fixing new Handle 75mm, brass, chromium plated complete all as specified and as shown on drg.
Preparation of surface with sand paper after scrubbing and French polishing to side board, with and including to the parts reppaired/ replaced under item No 1 to 9 to the required gloss, to match with the existing complete all as specified and as shown on drg.
GUJRAL BUILDERS (BID ID -3120564)
JAISWAL ENTERPRISES (BID ID -3110521)
m/s pramod chandra jain (BID ID -3108119)
Shivam Enterprises (BID ID -3108922)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .