SPECIAL REPAIR TO EXTERNAL WATER SUPPLY PIPELINE AND PROVN OF 3 X SOAKAGE WELL UNDER GE JAIPUR AT JAIPUR MIL STN

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10sq m on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm etc complete all as specified and directed

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc, complete all as specified and directed

M&L for boring under road / drain PCC path by manual method & incerting the 80mm dia light grade GI pipe tubing for pipe protection complete all as specified and directed.

S&F in repair GI tubing medium grade with all fitting, fixed to wall or concealed or fitted to ceiling or laid under floor / trenches / road including taking up or down old steel tube etc, complete all as specified and directed for following size :

15mm bore

20mm bore

25mm bore

50mm bore

80mm bore

S & F in replacement for sluice valves, class PN 1.0 of 80mm dia with cast iron body with forged steel spindle, non rising type and cast iron wheel head, both ends flanged, IS-14846 marked complete with neoprene rubber gasket, jointing material and including nuts/bolts/washer of suitable size etc complete all as specified and directed including taking down old unsv.

M&L for cutting /welding of existing header for connection of new pipe line of 80mm dia including fitting / fixture like flange, tee, bend etc complete all as specified and directed.

M&L for construction to brick masonary valve pit/ chamber of size 600 x 750 x 600 mm including necessary excavation and earth work, PCC, 15mm thick Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock complete all as specified and directed

Excavating in trenches, exceeding 1.5m wide and not exceeding 3m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10sq m on plan and getting out in soft/loose soil complete all as directed

M&L for excavating over areas, not exceeding 1.5m deep and getting out in soft loose soil etc, complete all as specified and directed

M&L for excavating over areas, exceeding 1.5m deep and not not exceeding 3m deep and getting out in soft loose soil etc, complete all as specified and directed

M&L for excavating over areas, exceeding 3m deep and not not exceeding 4.5m deep and getting out in soft loose soil etc, complete all as specified and directed

M&L PCC (1:4:8) type D.2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) etc complete all as specified and directed.

M&L 15 mm thick plaster in cement mortar (1:4) on contcrete/brick surfaces, finished even and fair without using extra cement etc complete all as specified and directed.

M&L for walling of random rubble, uncourse, brought up to courses, well bonded, built in CM 1:6 complete all as specified and directed.

M&L for walling of random rubble, uncourse, well bonded, laid dry in retaining wall, abutments and similar wroks, brought upto course dia not exc 6m complete all as specified and directed.

M&L for Loose filling with brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc, complete all as specified and directed

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide etc, complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of flat rough finished surface etc etc complete all as directed and as specified

M&L for providing reinforced cement concrete (Nominal Mix) type B1, 1:2:4 using 20mm graded stone aggregate for slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slab and in shelves and like etc, complete all as specified and directed.

M&L for providing, precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc complete all as directed and as specified

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) complete all as specified and directed

M&L for mild steel TMT steel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers etc, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

M & L Cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, on walls 100 mm bore etc complete all as directed and as specified

S&F cast iron cowl 100 mm bore etc complete all as directed and as specified

M&L for cutting into existing manholes for connecting new drains 200mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (inner girth only to be measured) etc, complete all as specified and directed.

M&L for PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate etc, complete all as and directed

Less Schedule of Credit

Satish kumar and company

S.R.Enterprises

M/S R B CONSTRUCTIONS

M/S Anil Enterprises

DIVYA ASSOCIATES