REPAIRS/MAINT TO MINI RANGE, REPAIR/REPLACEMENT OF U/S LIGHTS AND WIRING, DBs INCLUDING SUB MAIN WIRING, LED FLOOD LIGHT AND OTHER CONNECTED WORK (DISPERSAL, HANGARS AND BLAST PEN) IN TECHNICAL AREA AND CONVERSION OF OLD UNSV LIGHT FITTINGS WITH ENER

Amount

Cleaning of shrubs, uprooting of stumps, small bushes including ploughing and levelling (mechanically) of ground surfaces depth exceeding 30cm and not exceeding 45cm including picking up stone peddles/gravels (of size exc 12mm), making the surface even and uniform, removal of debries from the site upto a distance of 50m, dressing the pin target and surface dressing of embankment for receiving lime of F.G/R.P target as required., complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., n. exc. 1.5m high from base., complete all as specified and directed. (Note: Existing damaged embankement shall be repaired under this item using existing soil obtained at site)

Supply and laying in poistion sand bags with HDPE bag (minimum sand centent in each bag shall be 0.03cum), properly stitching the bag with nylon threads and placed in position., complete all as specified and directed.

Supply and spreading of sawdust and fine sand (screened) mixed in equal parts i.e 1:1 by bulk over butt with minimum depth of 90cm in slope and finished., complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

M & L for rolled mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

Fixing of old serviceable or re-straining and re-securing of galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings including making good staples etc.(each line wire to be measured), complete all as specified and directed.

Dismantling fencing wire mesh, any type, complete all as specified and directed.

Supply only chain link fencing made out of 4mm dia galvanised iron wire of mesh 75 mm x 75 mm/ 100 mm x 100mm size, made up to into mattress or cages, complete all as specified and directed. Note : Per meter weight of chain link brought by the contractor shall be finalized through a BOO.

Fixing only new chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provisition of binding wire etc, complete all as specified and directed.

Straining and fixing old chain link fencing to any types of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed.

S & F mild steel screw bolts of 11 to 15mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n. exc. 10cm long, complete all as specified and directed.

S & F in repair concertina coil fencing with punching tap concertina coil 960mm dia 13 mtres openable length having 53 Nos rounds per 6 metres length, single coil, fixed on wall with existing angle iron 'Y' shaped with horizontal reinforced barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron, complete all as specified and directed. Note: (i) Weight of concertina coil shall be ascertain by a BOO to be convened by Accepting Officer (ii) Barbed wire shall be measured and paid seperately under respective items here-in-before)

All as per serial item No. 14 above but fixing only in repair of any dia, complete all as specified and directed. (Note: Old serviceable loosed concertina coil shall be refixed at site after taking down complete)

Material and labour for preparation of steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint(1st grade quality) over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles and removing rubbish off the premises, complete all as specified and directed

Material and labour for brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

Rendering 15mm thick on other than fair faces of brick work/concrete surfaces in any position in CM (1:4), finishing surfaces even and smooth w/o using extra cement, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. and removing rubbish off the premises, complete all as specified and directed.

M&L for finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade, with two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm, complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in mass concrete, footings, of col and beams/slabs etc., complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2, ( using 20mm graded crushed stone aggregate) as in sub base of floor/plinth protection including finishing surface even and fair, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing caping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade (ISI marked) including all conduit accessories on surface wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switches, sockets, fan regulator etc including 1.5 Sqmm FRLSH PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 27 here-in-above but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 27 here-in-above but One 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 27 here-in-above but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin/5 pin 15 Amps socket, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm FRLSH for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 31 here-in-above but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 31 here-in-above but one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 31 here-in-above but point wiring with 4.0 Sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin/5 pin 15 Amps socket, complete all as specified and directed.

S&F for switch piano flush button single pole one way 6 Amps 240 volts, complete all as specified and directed

S&F ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed

S&F for socket outlet 2 in 1, 3 pin 6 Amp, flush type, complete all as specified and directed

S&F for switch socket combination 2 in 1, 6 Amp, flush type, complete all as specified and directed

M & L for switch socket combination 3/5 pin, 16 Amp, flush type, complete all as specified and directed

S&F Stepped type electronic fan regulator, flush type AC, 230 volts suitable for any type of ceiling fan, complete all as specified and directed

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and draw sub main wiring in repairs with two run of 4.0 sqmm single core PVC insulated, unsheathed multistranded FRLSH copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25 mm size (ISI marked) including all conduit accessories for concealed wiring to the surfaces of the wall/ceiling and one run of 4.0 Sqmm single core PVC insulated unsheathed FRLSH copper earth continuity conductor including tsking down old u/s wiring of any description and making good surfaces, complete all as specified and directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduit and accessories shall be measured and paid as one length.)

All as per item No 42 here-in-above but in PVC casing/caping, complete all as specified and directed.

S & F for surface type flame proof sub main wiring with 2 runs of single core 4 Sqmm (nominal area) PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade (ZHFR), drawn through in existing surface/recessed PVC/steel conduit pipe including earth continuity conductor using PVC insulated unsheathed copper conductor cable with one run of 4 Sqmm (nominal are) ZHFR, connected to common earth dolly, complete all as specified and directed. Note : Three runs of 4 sqmm sub main wiring shall be measured as one run length.

All as per item No 44 here-in-above but 2 run of 2.5 Sqmm + and one run of 2.5 Sqmm earth wire, complete all as specified and directed.

S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed. Make : Prateek/Crompton/Sudhir/Flexpro/Shyam Switchgear

S & F flame proof switch socket & plug combined in LM6 cable termination box, 16A, 250V, 2P+earth (3 Pin) having fool proof interlocking i.e plug cant be removed in ON condition, complete all as specified and directed. Make : Prateek/Crompton/Sudhir/Flexpro/Shyam Switchgear

S & F LED FLP/WP well glass fitting 120 W including integral reflector made of aluminium alloy with all accessories wired and including connecting up with suitable size copper conductor cable (ZHFR) in flexible steel conduit, complete all as specified and directed. Make : Prateek/Crompton/Sudhir/Flexpro/Shyam Switchgear

S & F 100 Watt LED flood light user friendly and reliable solution suitable for multipurpose applications in the industry segment, IP 66 protection complete with all accessories including mounting arrangment on pole and necessary electric connection using required size copper cable, complete all as specified and directed.

S & F sheet metal enclosure double door, MCB DBs, phosphatised, powder coated, single pole & neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S & F MCB single pole and neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S & F MCB single pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone/concretewall/blocks/slab where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc. 20cm girth, complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fix in replacement MCCB with thermal magnetic protection unit 400 Amp, 50 KA, ‘C’ series four pole complete with suitable lugs and fixing into LT panel, complete all as specified and directed.

Supply and fix in replacement MCB triple pole 40 to 63 Amp, three pole, 415 Volt complete with suitable lugs and fixing into LT panel, complete all as specified and directed.

Supply and fix in replacement MCB four pole 63 Amp to 100 Amp, four pole, 415 Volt complete with suitable lugs and fixing into LT panel, complete all as specified and directed.

Supply and fix in replacement three pole contactor 20Amp, complete with suitable lugs and fixing into LT panel, complete all as specified and directed.

Supply and fix in replacement digital timer switch (Astronomical function) duly set to work as per requirement and as per site conditions, complete with suitable lugs and fixing into LT panel, complete all as specified and directed. Make :- Legrand Cat Part No. 4126 54 or equivalent make of Havelles/L&T/Siemen

S & F decorative type LED luminaire 600mm x 600mm, 30 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including making good to the POP/grid ceiling as per existing and connecting upto with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. Make : Philips Cat Part No RC370B LED 36S-6500 G5 L60W60 PSU OD or equivalent in Havells/Surya/Wipro/Crompton

S & F decorative type LED spot light 24 Watt, 220 V AC recessed mounted rotatble type with beam angle 36 degree, tilt 90 degree, 4500/6000K (As required) complete suitable driver and connecting copper wire of suitable size from ceiling rose to fitting and mounting arrangment, complete all as specified and directed. Make : Crompton LCSRRA-24-CDL or equivalent in Havells/Philips/Surya/Wipro

S & F decorative type LED spot light 12 Watt, 220 V AC recessed mounted rotatble type with beam angle 36 degree, tilt 30 degree, 4500/6000K (As required) complete suitable driver and connecting copper wire of suitable size from ceiling rose to fitting and mounting arrangment, complete all as specified and directed. Make : Crompton CDR-212-12-30/40-SL-NWH or equivalent in Havells/Philips/Surya/Wipro

S & F decorative type LED luminaire 1x4feet, 40 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including making good to the POP/grid ceiling as per existing and connecting upto with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. Make : Crompton Cat part No LCTLRNE-40-CDL(1x4) or equivalent in Havells/Philips/Surya/Wipro

S & F wall mounted LED light fitting 1 x 40 Watt, 4 feet long, polycarbonate housing integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Crompton Cat part No CCS-100-40-65-SL-DP-NWH or equivalent in Havells/Philips/Surya/Wipro

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, polycarbonate housing integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Crompton Cat part No CCS-102-20-65-SL-DP-NWH or equivalent in Havells/Philips/Surya/Wipro

S & F for LED FLP/WP well glass fitting 120 W including integral reflector made of aluminium alloy with all accessories wired and including connecting up with suitable size copper conductor cable in flexible steel conduit, complete all as specified and directed. Make : Sudhir, Cat Part No WG/2C/1236 or equivalent in Havells/Philips/Surya/Wipro

S & F LED bulkhead light fitting 10 Watt, pressure die cast aluminium housing , IP 65 complete with electronic driver and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed Make : Crompton cat part No LBHE-10-CDL or equivalent in Havells/Philips/Surya/Wipro

Supply and fix in replacement of Aesthetically designed LED light fitting 40 watt polycarbonate difuuser with IP65 protection with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink with symmetrical light distribution and excellent heat dissipation and fixing material such as suitable dia GI pipe as per OEM instruction, concealed connection from terminal box to light fittings including braking to existing wall for fixing of same and making good to the disturbed portion, complete all as specified and directed. Make : Crompton Cat Part No CCP-121-28-40-SL-NWH or equivalent in Havells/Philips/Surya/Wipro/Bajaj

Supply and fix in replacement of 10 watt LED bollard lamp IP65 Inverted Pyramid Tripod type LED Bollard with soft 360 light distribution, control wiring and PCC,excavation and earth works including fixing to garden / pathway and making good to the disturbed portion, complete all as specified and directed. Make : Crompton Model No LBLSN-10-CDL or equivalent in Havells/Philips/Surya/Wipro/Bajaj Note : Excvation and earthwork PCC and making good to the disturbed surface shall be included in quoted rates.

Supply and fix in replacement light LED 35W suitable for outdoor areas with functionality during night and aesthetics during the day. IP65 die cast aluminium post top lantern designed with long life LED engine & electronic driver, complete including fixing material and connecting wire upto control gear box, complete all as specified and directed Make : Havells model No VICTORIAPT35WLED757PSYMTOTG or equivalent in Philips/Wipro/Bajaj

M & L for aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish of height 3 Meter compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300x110mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole. Decorative sleek casting ring to the pole complete including provision of PCC (1:3:6) type C-2 foundation,excavation & earthwork, nuts, bolts, washer, PVC copper 3 core flexible cable (FRLSH) 1.5 Sqmm from bottom terminal box to light fitting, complete all as specified and directed. Make : Havells Cat Part No. ECO POLE 3M TOP Ø 76mm or equivalent in Bajaj/Philips/Crompton

S & F LED solar post top lantern with in-built solar panel, LED light 20 watt and lithium battery, charge controller and 2 PIR sensor for automatic operation of light complete with 360 deg coverage, complete all as specified and directed. Make : Havells cat part No FIORIO 20 W 5700 K Solar Post Top or equivalent in Bajaj/Philips/Crompton/Wipro

Supply and fixing LED facade light 195 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with polycarbonate junction box and connecting wire copper 1.0 sqmm 3 core up to junction box, complete all as specified and directed. Make : Philips cat part No BVP483 LED210 CW SWB PSU GR or equivalent in Bajaj/Crompton/Havells

Supply and fixing LED street light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with polycarbonate junction box and connecting wire copper 1.0 Sqmm 3 core up to junction box, complete all as specified and directed. Make : Philips cat part No BRP 340 LED 150 CW HO SLC S1 PSUGR or equivalent in Bajaj/Surya/Wipro/Havells

Supply and fixing LED highbay light 118 watt 230 V AC Indoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with polycarbonate junction box and connecting wire copper 1.0 sqmm 3 core up to junction box, complete all as specified and directed. Make : Philips cat part No BRP 340 LED 150 CW HO SLC S1 PSUGR or equivalent in Bajaj/Surya/Crompton/Havells

S & F 3 core PVC insulated and sheated, multi stranded copper conductor cable of size 1.00 Sqmm for connection etc, complete all as specified and directed Note :- An amount of Rs.46082.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BIJAY KUMAR SHIVA

BHARAT ELECTRIC

M/S. NARENDRA KUMAR GARG

SHRI D P AGARWAL

Shri T P ANIL KUMAR