C/O Security Gates, Traditional Gate and Compound Wall around Tawang Walk Through Market.

Amount

SH :Compound wall 1.80m height (Length= 950.00 M) Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

SH :Compound wall 1.80m height (Length= 950.00 M) Re-Filling excavated earth in foundation and plinth etc in 15 cm layer including watering, rammingcomplete.

SH:- CEMENT CONCRETE Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. Foundation and plinth

SH:- RCC WORK Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement M20 (1Cement:1:5 sand:3 stone agreegates 20 mm nominal size) a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH:- RCC WORK Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH:- RCC WORK Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH- CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc and removal of form works for a) Foundation, footings, bases of columns and mass concrete.

SH- CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc and removal of form works for b)Columns, Pillers, posts struts etc.

SH- CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc and removal of form works for c) Lintels, beams, Girders, bressuners and cantilevers etc.

SH:- REINFORCEMENT Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted bars.

SH;- STONEWORK Random rubble masonry with hard stone in foundations and plinth in cement mortar 1 : 6 (1 cement : 6 fine sand) including levelling up with cement concrete 1 : 6 : 12 (1 cement : 6 coarse sand : 12 stone aggregate, 20mm nominal size) in foundation and plinth.

SH;- STONEWORK Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 6 (1 cement : 6 fine sand) in foundations and plinth.

SH;- STONEWORK Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.

SH;-FINISHING 12 mm Plaster 1:4 (1 Cement :4 sand)

SH;-FINISHING Applying one coat of cement primer of approved brand

SH;-FINISHING Finishing walls with water proofing cement pount of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

SH;-FINISHING Painting two or more coats(excluding priming cat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

SH:- STEELWORK Steel work in Single section, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. a) In Tees, Angles and Channels

SH : ENTRANCE GATE Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

SH : ENTRANCE GATE Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in. a)Foundation and Plinths.

SH : ENTRANCE GATE Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement M20 (1Cement:1:5 sand:3 stone agreegates 20 mm nominal size) a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH : ENTRANCE GATE Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH : ENTRANCE GATE Reinforcement of RCC work including bending, binding and placing in position complete.

SH : ENTRANCE GATE Steel work Riveted, bolted or welded in built up section in Tees, Angles, Flat and Channels

SH : ENTRANCE GATE Centering and shuttering including strutting, propping etc and removal of form works for a) Foundation, footings, bases of columns and mass concrete.

SH : ENTRANCE GATE Centering and shuttering including strutting, propping etc and removal of form works for b)Columns, Pillers, posts struts etc.

SH : ENTRANCE GATE Finishing walls with water proofing cement pount of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

SH : ENTRANCE GATE Applying priming coat with ready mixed primer of apprived brand and manufacture on steel work

SH : ENTRANCE GATE Painting two or more coats(excluding priming cat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

SH :Traditional Gate Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

SH :Traditional Gate Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. A) Foundations and Plinth

SH :Traditional Gate Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement . a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH :Traditional Gate Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregates 20 mm nominal size)

SH :Traditional Gate Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)

SH :Traditional Gate Reinforced cement concrete work in suspended floor, roofs, landing and balconies up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 sand : 3 stone aggregates 20 mm nominal size)Roof slab

SH :Traditional Gate Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted bars.

SH :Traditional Gate Centering and shuttering including strutting, propping etc and removal of form works for a) Foundation, footings, bases of columns and mass concrete.

SH :Traditional Gate Centering and shuttering including strutting, propping etc and removal of form works for b)Columns, Pillers, posts struts etc.

SH :Traditional Gate Centering and shuttering including strutting, propping etc and removal of form works for c) Lintels, beams, Girders, bressuners and cantilevers etc.

SH :Traditional Gate Centering and shuttering including strutting, propping etc and removal of form works for d) suspended floor, roofs, landing shelves and their supports(3.5 m height)

SH :Traditional Gate Steel work in Single section, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.

SH :Traditional Gate C/o of Traditional Monpa art and design on walls, beams pillers gate Choden ithani, gonpa and cover lintels of door amd windows etc with thai matelic golden paint of different colours a) Traditional Design

SH :Traditional Gate Painting of traditional Monpa art and design on walls, beams pillers gate Choden ithani, gonpa and cover lintels of door amd windows etc with thai matelic golden paint of different colours a) Traditional paintings

Peerless Builders

M/S YESHI THINLEY