Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.4 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹48.7 L+₹3.6 L (8.01%)Rejected-Finance | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹49.5 L+₹4.4 L (9.69%)Rejected-Finance | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L5₹49.7 L+₹4.6 L (10.2%)Rejected-Finance 19 62 1ST FLOOR WEST MOTI BAGH SARAI ROHILLA NEW DELHI 110035 | NEW DELHI | NEW DELHI | DELHI | 110035 | L5 | Rejected-Finance HIGHER RATE | |
| 5 | L6₹49.9 L+₹4.8 L (10.6%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L6 | Rejected-Finance HIGHER RATE |
| Sl No | Description | Qty | Unit | SANJEEV ENTERPRISES L6 | SANJEEV ENTERPRISES L4 | B Kumar and Co L2 | BEHAL TRADERS L7 | RUCHIKA ENGG.WORKS L8 | SNOWY ENGINEERING INC L5 | J B ELECTRICALS L3 | Pall Associates L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, etc complete all as specified and directed. | 130 | Cum | 185 ₹24,050 | 220 ₹28,600 | 170 ₹22,100 | 165 ₹21,450 Lowest | 200 ₹26,000 | 200 ₹26,000 | 200 ₹26,000 | 185 ₹24,050 |
| 2.00 | Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed. | 20 | Cum | 150 ₹3,000 | 80 ₹1,600 Lowest | 100 ₹2,000 | 125 ₹2,500 | 150 ₹3,000 | 150 ₹3,000 | 200 ₹4,000 | 85 ₹1,700 |
| 3.00 | Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. | 110 | Cum | 1,000 ₹1,10,000 | 800 ₹88,000 | 650 ₹71,500 | 700 ₹77,000 | 700 ₹77,000 | 800 ₹88,000 | 200 ₹22,000 Lowest | 700 ₹77,000 |
| 4.00 | M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and directed.
Note: Punned thickness of sand layer shall be measured and paid to contractor. | 110 | Cum | 1,000 ₹1,10,000 | 820 ₹90,200 | 750 ₹82,500 Lowest | 800 ₹88,000 | 800 ₹88,000 | 750 ₹82,500 Lowest | 900 ₹99,000 | 900 ₹99,000 |
| 5.00 | M&L in replacement of Brick tiles; common burnt clay building bricks sub-class ‘B’ Designation 75 laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and directed. | 12 | Per 1000 Nos | 9,000 ₹1,08,000 | 7,500 ₹90,000 Lowest | 9,500 ₹1,14,000 | 10,500 ₹1,26,000 | 10,000 ₹1,20,000 | 10,000 ₹1,20,000 | 8,500 ₹1,02,000 | 8,500 ₹1,02,000 |
| 6.00 | Supply/ laying/ fixing in replacement of galvanised steel water tubing light grade bore of dia 80 mm with all fittings complete all as specified and directed. | 6 | RM | 1,850 ₹11,100 | 2,200 ₹13,200 | 1,800 ₹10,800 | 1,950 ₹11,700 | 2,000 ₹12,000 | 1,500 ₹9,000 | 800 ₹4,800 Lowest | 1,800 ₹10,800 |
| 7.00 | Supply/ laying/ fixing in replacement of galvanised steel water tubing light grade bore of dia 50 mm with all fittings complete all as specified and directed. | 6 | RM | 1,000 ₹6,000 | 990 ₹5,940 | 770 ₹4,620 | 850 ₹5,100 | 900 ₹5,400 | 1,000 ₹6,000 | 500 ₹3,000 Lowest | 700 ₹4,200 |
| 8.00 | Making/ boring hole under road /pavement/ hard standing with help of Bookies suitable for passing pipe (any type) up to 150 mm Dia not less than one mtr below ground level including required earth work complete all as specified and directed by Engg-in-charge. | 6 | RM | 2,000 ₹12,000 | 900 ₹5,400 Lowest | 1,900 ₹11,400 | 2,100 ₹12,600 | 1,800 ₹10,800 | 2,000 ₹12,000 | 1,500 ₹9,000 | 1,800 ₹10,800 |
| 9.00 | Supply and laying in replacement of XLPE LT cable size of 240 Sqmm x 3.5 core 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/ fixed to wall/ pole/ laid in floor including necessary connections and suitable size of thimbling and minor consumables spares like thimbles, bakelite board etc for connection shall be included in the quoted rate complete all as specified and directed by Engineer-in-Charge.
Note : Excavation, earth work, sand cushioning, brick protection and pipe shall be measured and paid separately under appropriate item of this schedule. | 130 | RM | 2,250 ₹2,92,500 | 2,300 ₹2,99,000 | 2,550 ₹3,31,500 | 2,750 ₹3,57,500 | 2,400 ₹3,12,000 | 2,300 ₹2,99,000 | 2,000 ₹2,60,000 | 1,990 ₹2,58,700 Lowest |
| 10.00 | All as per item No 9.00 above but for size 185 Sqmm x 3.5 core complete all as specified and directed. | 270 | RM | 1,670 ₹4,50,900 | 1,350 ₹3,64,500 | 1,400 ₹3,78,000 | 1,300 ₹3,51,000 | 1,650 ₹4,45,500 | 1,700 ₹4,59,000 | 1,500 ₹4,05,000 | 1,140 ₹3,07,800 Lowest |
Tender Value
Refer Docs
EMD Value
₹99,998
Closing Date
2 Aug 2025, 6:00 pmClosed
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
REPAIR/ MAINT OF EXTERNAL ELECTRIC SUPPLY, SECURITY LIGHTS, DG SET ALONGWITH OTHER CONNECTED ITEMS AT KASHMIR HOUSE AND HQ IDS UNDER GE NEW DELHI
2025_MES_719597_1
NIT No GE/ND-29/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹99,998
Yes
22 Sept 2025
10 Jul 2025
4 Aug 2025
10 Jul 2025
2 Aug 2025
26 Jul 2025
Amount
Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, etc complete all as specified and directed.
Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and directed. Note: Punned thickness of sand layer shall be measured and paid to contractor.
M&L in replacement of Brick tiles; common burnt clay building bricks sub-class ‘B’ Designation 75 laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and directed.
Supply/ laying/ fixing in replacement of galvanised steel water tubing light grade bore of dia 80 mm with all fittings complete all as specified and directed.
Supply/ laying/ fixing in replacement of galvanised steel water tubing light grade bore of dia 50 mm with all fittings complete all as specified and directed.
Making/ boring hole under road /pavement/ hard standing with help of Bookies suitable for passing pipe (any type) up to 150 mm Dia not less than one mtr below ground level including required earth work complete all as specified and directed by Engg-in-charge.
Supply and laying in replacement of XLPE LT cable size of 240 Sqmm x 3.5 core 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/ fixed to wall/ pole/ laid in floor including necessary connections and suitable size of thimbling and minor consumables spares like thimbles, bakelite board etc for connection shall be included in the quoted rate complete all as specified and directed by Engineer-in-Charge. Note : Excavation, earth work, sand cushioning, brick protection and pipe shall be measured and paid separately under appropriate item of this schedule.
All as per item No 9.00 above but for size 185 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 150 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 120 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 95 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 70 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 50 Sqmm x 3.5 core complete all as specified and directed.
All as per item No 9.00 above but for size 35 Sqmm x 4 core complete all as specified and directed.
All as per item No 9.00 above but for size 25 Sqmm x 4 core complete all as specified and directed.
All as per item No 9.00 above but for size 16 Sqmm x 4 core complete all as specified and directed.
All as per item No 9.00 above but for size 10 Sqmm x 4 core complete all as specified and directed.
S&F in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 10 sqmm complete all as specified and directed.
All as per item No 20.00 above but for size 6 sqmm complete all as specified and directed.
S&F in replacement Cable jointing kit for 1100 volt complete with jointing material andaccessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size upto 16 sqmm complete all as specified and directed.
All as per item No 22.00 above but for size 25 to 35 sqmm complete all as specified and directed.
All as per item No 22.00 above but for size 50 to 70 sqmm complete all as specified and directed.
All as per item No 22.00 above but for size 95 to 120 sqmm complete all as specified and directed.
All as per item No 22.00 above but for size 150 to 185 sqmm complete all as specified and directed.
All as per item No 22.00 above but for size 240 to 300 sqmm complete all as specified and directed.
S&F in replacement of MCCB 4P 63 Amp, 16 kA thermal type complete all as specified and directed.
S&F in replacement of MCCB 4P 100 Amp, 16 kA thermal type complete all as specified and directed.
S&F in replacement of MCCB 4 Pole, 415 V, with Microprocessor release 100 Amps with breaking capacity 36 KA complete all as specified and directed. Note: All MCCBs of schedule shall be conforming Ics= 100% Icu as per IEC 60947 -2 and front LED indication (ready, overload pre-alarm & over load) complete all as specified and directed.
All as per item No 31.00 above but for 160 Amps with breaking capacity 36 KA complete all as specified and directed.
All as per item No 31.00 above but for 250 Amps with breaking capacity 36 KA complete all as specified and directed.
All as per item No 31.00 above but for 400 Amps with breaking capacity 36 KA complete all as specified and directed.
Decarbonising/ cleaning of Existing LT panel cubical type of various size consists of bus bar and circuit chamber, metering chambers CTs and relays chambers, checking the bus bar joints, bus bar and circuit spouts, cleaning and applying Busbar Insulation Tape to the bus bars, checking the current transformer, applying Monoplast compound at the bus bar joints after tightening of joints, replaced new suiable size of lugs /suitable copper control cable and reassembling, if any rusted sheet replaced with new sheet as per existing size complete all as specified and directed by Engineer-in-Charge. Note: Cost of lubricant/ cleaning agents (CRC & rust remover) / hardware like springs/ bolts/ nuts/ washers,lugs/ suitable copper cables cost of labour, T&P required for replacement shall be deemed to be included in the quoted rate.
M&L for spots with thinner applying two coats of spray painting priming with aluminium oxide on outside with spraying machine to LT Panels indoor/outdoor after disconnecting of power supply from incoming and LT supply from outgoing complete all as specified and directed.
M&L for shifting of LT panel board/ LT feeder pillar box from low line side to as required level minimum 1.2 Mtr hight including taking down existing LT cable of any size, refixing as same condition incomming and out goining cables and grouting of LT panel, provn of PCC foundation complete all as specified and directed by Engr-in-Charge.
S&F in replacement saddle for Electrical cable mounting metal, strong corrosion condition resistance, easy installations of sizes 6cmX4.5cmX2.5cm complete all as specified and directed.
S&F in replacement Electrical cable lugs aluminium,strong corrosion condition resistance, easy installations of sizes 16 Sqmm to 50 sqmm complete all as specified and directed.
Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 125 Amps complete all as specified and directed.
Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed.
Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps complete all as specified and directed.
S&F in replacement street light luminaires, LED type 90 watts, 230 volts AC out door type with high pressure die cast aluminium housing and heat resistant flat complete with driver, lamp bracket GI pipe light grade 1.5 meter long made out of 40 mm bore bend to shape, flat iron clamps made out of 50x6mm flat iron with nut bolts and washers including painting clamps and electric connection with three core 1.5 sqmm copper cable complete all as specified and directed.
All as per item No 46.00 above but for 100 watts complete all as specified and directed.
All as per item No 46.00 above but for 120 watts complete all as specified and directed.
S&F in replacement flood light luminaires, LED type 100 watts, 230 volts AC out door type with rectengular with innovative thermal managment in multiple optics and equipped with IP 66 protection resistance to impact and corrosion glare free complete with driver, lamp complete all as specified and directed.
All as per item No 49.00 above but for 120 watts complete all as specified and directed.
Supply and fixing in replacement LED driver of 90/100/120 watt suitable for LED fitting complete all as specified and directed.
S&F in replacement industrial type & heavy duty, Exhaust fan 600 mm sweep metalic body, copper woumded motor and metalic blades with Louver shutter, fixing to the wall with nut bolts/fastner and cutting of hole if required included in the quoted rates complete all as specified and directed.
S&F in replacement street light pole box pvc body with bus bar suitable for phsse neutral and earth connection and provision of fixing one SP mcb for ON/OFF control strret lights complete all as specified and directed.
M&L for painting to electric pole steel tubular/ PCC after removing /scraping/ bruses/ cleaning to old paint on external surface in two coats of paint over one coats of red oxide primer by using syenthatic enamel aluminium paint on steel tubular and cement paint on PCC poles in any height/ length/ dai etc including cross arms/ angles, nut, bolt, washers etc and making alternate strip in 30 cm minium width upto 1.5 Mtr above normal GL and marking as direction using diffrent colour of paint complete all as specified and directed by Engr-in-Charge. Note: Colour of paint shall be approved by Engr-in-charge.
M&L for attending breakdown of DG set at anytime including HOLIDAYS (Saturday, Sunday national holiday) with one skilled mechanic and 2 nos helper with all the equipments (multimeter, spanner, spray to remove carbon, fault locating machine if any required), opening of DG set cleaning piston, water body, cylinder liner and other joint rings, greasing to each parts complete all as specified and directed. Note: Spare parts will be measured separately. Failure or delay to attend the complaints must be penalised by Rs 500/ Day
Servicing and preventive maintenance of DG set of capacity 160 KVA of by taking out U/S spares, Cleaning by brushing to remove dust including cleaning of filter, Checking of all nuts, bolts tightening where ever necessary, check up engine oil level, coolant level and Labour for top up if necessary, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc greasing oiling and checking For smooth functioning of DG Set complete all as specified and directed. Note: (i) Any spares,Engine oil,coolant,unserviceable spares required to be replaced shall be measured paid for separately under respective items. (ii) Minor spares like nuts,bolts and consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate
All as per Item No 56.00 above but for DG set of capacity 125 KVA complete all as specified and directed.
All as per Item No 56.00 above but for DG set of capacity 75 KVA complete all as specified and directed.
All as per Item No 56.00 above but for DG set of capacity 62.5 KVA complete all as specified and directed.
All as per Item No 56.00 above but for DG set of capacity 40 KVA complete all as specified and directed.
S&F in repair Fuel filter for 160 KVA DG set complete all as specified and directed.
S&F in repair Fuel filter for 125 KVA DG set complete all as specified and directed.
S&F in repair Fuel filter for 75 KVA DG set complete all as specified and directed.
S&F in repair Fuel filter for 62.5 KVA DG set complete all as specified and directed.
S&F in repair Fuel filter for 40 KVA DG set complete all as specified and directed.
S&F in repair Lub oil filter for 160 KVA DG set complete all as specified and directed.
S&F in repair Lub oil filter for 125 KVA DG set complete all as specified and directed.
S&F in repair Lub oil filter for 75 KVA DG set complete all as specified and directed.
S&F in repair Lub oil filter for 62.5 KVA DG set complete all as specified and directed.
S&F in repair Lub oil filter for 40 KVA DG set complete all as specified and directed.
S&F in repair Air cleaner filter (inner and outer) for 160 KVA DG set complete all as specified and directed.
S&F in repair Air cleaner filter (inner and outer) for 125 KVA DG set complete all as specified and directed.
S&F in repair Air cleaner filter (inner and outer) for 75 KVA DG set complete all as specified and directed.
S&F in repair Air cleaner filter (inner and outer) for 62.5 KVA DG set complete all as specified and directed.
S&F in repair Air cleaner filter (inner and outer) for 40 KVA DG set complete all as specified and directed.
S&F in repair Bypass filter for 160 KVA DG set complete all as specified and directed.
S&F in repair Bypass filter for 125 KVA DG set complete all as specified and directed.
S&F in repair Bypass filter for 75 KVA DG set complete all as specified and directed.
S&F in repair Bypass filter for 62.5 KVA DG set complete all as specified and directed.
S&F in repair Bypass filter for 40 KVA DG set complete all as specified and directed.
S&F in repair V belt upto 160 KVA DG set complete all as specified and directed.
S&F in repair key switch for 40 to 160kva DG set complete all as specified and directed.
S&F in repair Display control panel (LED Board) for 40 to 160kva DG set complete all as specified and directed.
S&F in repair Lube oil pressure sensor adaptor (oil control safety) upto 160KVA DG set complete all as specified and directed.
S&F in repair coolant temperature sensor (coolent control safety) upto 160KVA DG set complete all as specified and directed.
S&F in repair AMF controller assy for auto/manual operation for 40 to 160kva DG set complete all as specified and directed.
S&F in repair Control assy main generator panel for 40 -160 KVA DG set having microprocessor unit for controlling coolant temperature, fuel injection, oil pressure, governor etc complete all as specified and directed.
Calibration of FIP and fuel injector petty repairs to make the FIP and injectors functional for the DG set of capacity up to 40-160 KVA complete all as specified and directed.
S&F in repair Stop solenoid switch 12 Volts complete all as specified and directed.
S&F in repair Stop solenoid switch 24 Volts complete all as specified and directed.
S&F in repair Turbo charger for any capacity DG set complete all as specified and directed.
S&F in repair Automatic Voltage Regulator fit for DG set of any make and any capacity complete all as specified and directed.
Supply & Filling in replacement engine oil multi grade 15W40 complete all as specified and directed. Make: ELF Oil/ Castrol /HP or equivalent
Supply & Filling in replacement Coolant ready mix complete all as specified and directed.
Supply & filling of battery water with electrolyte Mix complete all as specified and directed.
Disconnecting the electric connection of Alternator of capacity 40/ 62.5/ 75/ 125/ 160 KVA DG set, taking the accumalator and cleaning the core assembly through air blower, heat varnishing with insulating material complete all as specified and directed.
S&F in repair Lub Oil cooler plate complete all as specified and directed.
S&F in repair Lub Oil pressure gauge pipe of required standard size complete all as specified and directed.
S&F in repair Oil spray nozzle assembly complete all as specified and directed.
S&F in repair Piston assembly complete all as specified and directed.
S&F in repair Main Bearing of various sizes for DG set of different capacity complete all as specified and directed.
S&F in repair Water temp switch complete all as specified and directed.
S&F in repair Lub Oil pump high discharge of required standard size complete all as specified and directed. Make- As Per OEM
Material and labour for cleaning external surface with cleaning agent including cleaning of radiators coil with with mild acid (or caustic soda) and cleaning of fuel tank etc of the following capacities complete including writing SM/MES nos on DG set size of letter not less than 50mm x 50mm of capacity 160/125/75/62.5/40 KVA including a coat of syathetic enamel painting, complete all as specified and directed.
S&F in repair self starter 24 volt DC complete all as specified and directed.
Servicing of Generator AMF Panel for 40 KVA, 62.5 KVA, 75 KVA, 125 KVA and 160 KVA Gen set complete including and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate labour for replacement of u/s spares, testing complete all as specified and directed.
S&F in repair of indicator lamp (R,Y & B) suitable for AMF panel complete all as specified and directed.
S&F in repair of field coil assembly for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of Eye bolt for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of fan key for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of fan assembly for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of fan for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of circlip for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of Brush holder spindle for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of Slipring assembly for 40-160 KVA DG set complete all as specified and directed.
S&F in repair of Exicitation (CX) unit for 40-160 KVA DG set complete all as specified and directed.
Supply and fix in repair Battery terminal made with brass for 12/24 volt battery complete all as specified and directed.
S&F in repair hose pipe with clamp for DG set 40 to 160 KVA complete all as specified and directed.
S&F in repair Bettery Lead with nagative and positive brass terminals of suitable sizes and length of each lead complete all as specified and directed.
S&F in repair Single phase preventor VSP II for 3 phase motor complete all as specified and directed.
S&F in repair of battery 12V upto 150 AH maintenance free battery, 12 Volt intially charged with suitable size of copper leads and brass terminals complete all as specified and directed by Engr-in-charge.
S&F in repair of battery 12V upto 180 AH maintenance free battery, 12 Volt intially charged with suitable size of copper leads and brass terminals complete all as specified and directed by Engr-in-charge.
Supply in replacement Battery Charger 12 Volt DC,for AMF Pannel complete all as specified and directed.
S&F in repair relay 415 VAC for AMF Pannel complete all as specified and directed.
S&F in repair AMF panel timer relay for circuits 230Volt AC supply as per existing make and capacity complete all as specified and directed.
S&F in repair 3 pole power contactor 160 A ,MNX 140 for AMF Pannel complete all as specified and directed. Make: L&T /Siemns
S&F in repair 3 pole power contactor 100 Amp MNX 80 for AMF Pannel complete all as specified and directed. Make: L&T /Siemns
S&F in repair 3 pole power contactor 250 A for AMF Pannel complete all as specified and directed. Make: L&T /Siemns
S&F in repair MCCB 4 pole 250 A 25 KA for AMF Pannel complete all as specified and directed.
S&F in repair MCCB 4 pole 160 A 16 KA for AMF Pannel complete all as specified and directed.
S&F in repair MCCB 4 pole 100 A 16 KA for AMF Pannel complete all as specified and directed.
Dismantling of DG Set Part i.e. Cylider head, Turbo, Fuel Pump and taking from the site to workshop for repair and assembling to the DG set including load testing of DG set capacity upto 160 KVA complete all as specified and directed.
S&F in repair Cylinder liner with joint ring upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Piston assembly complete upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Gasket for cyl head (1.22mm) upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Set of joints (for PG )/4H.3031 upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Set of O rings upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Inlet and exhuast valve pair upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Valve guide (for inlet & exhuast) upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Valve seat insert (inlet) upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Valve seat insert (exhaust) upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Valve collet upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair LE bearing STD upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Spin on filter for lubricanting oil upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Primary Element upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Secondary Element upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Cylinder head repair upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Turbo Repair kit upto capacity up to 160 KVA complete all as specified and directed.
S&F in repair Fuel Pump/ Silencer/ Radiator upto capacity up to 160 KVA complete all as specified and directed.
Material and Labour for in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation, earth work, testing on completion complete all as specified and directed.
Material and Labour for in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead iron strip 32X6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation, earth work, testing on completion complete all as specified and directed.
M&L in replacement for maintenance free chemical earthing with enviornment friendly earthing system consisting of 40 mm dia M S earth eletrode with electrolytic grade copper coating of 3 mtr length, to be lowered in 150 mm dia bore including filling backby earth enhancing compound (10 kg x 3 bag) minimum and the top of the bore shall be finished with FRP pit cover of suitable size. Earth resistance should be less than 1 ohm complete all as specified and directed. Note :- 1. Earth work , earthing chamber with cover of FRP and testing of earthing will be deemed to be included in quoted rate.
S&F in replacement Earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd copper strips of size20 mmX3mm complete all as specified and directed. Note: (a) Srl Item No 09.00 to 27.00, 29.00 to 34.00, 46.00 to 50.00, 57.00, 58.00, 83.00, 86.00 to 88.00, 91.00, 92.00, 105.00, 121.00, 122.00, 129.00 to 131.00 & 150.00 to 153.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.
B Kumar and Co (BID ID -3380445)
J B ELECTRICALS (BID ID -3380065)
SANJEEV ENTERPRISES (BID ID -3380399)
SNOWY ENGINEERING INC (BID ID -3380787)
SANJEEV ENTERPRISES (BID ID -3380247)
BEHAL TRADERS (BID ID -3380500)
RUCHIKA ENGG.WORKS (BID ID -3380648)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .