Construction of standard outdoor Volleyball Court

Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Providing and laying a well-graded granular sub-base over the prepared subgrade for an outdoor volleyball court. The work includes spreading aggregates in uniform layers, sprinkling water to achieve proper moisture content, and compacting each layer using mechanical rollers to achieve the required density and stability. The sub-base shall consist of a combination of Granular Sub Base (GSB) and Wet Mix Macadam (WMM) layers, carefully graded to provide adequate load distribution, drainage, and a firm foundation for the PCC concrete base. All materials shall conform to relevant standards, be free of deleterious matter, and be properly compacted to avoid settlement or unevenness. The finished surface shall be leveled to the desired profile, maintaining the required slope for surface drainage, and shall provide a durable, stable, and uniform base suitable for supporting the subsequent PCC layer and synthetic acrylic flooring system.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Providing and fixing 2nd class teak wood/ Category- II (B)/ III/ IV Sawn Timbers plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 25 mm thick

Providing and applying a complete synthetic acrylic sports flooring system over a properly prepared and cured PCC base/ timber base for an outdoor volleyball court. The work includes cleaning and leveling the concrete surface, application of a primer coat for adhesion, followed by a resurfacer layer to fill minor undulations. Over this, multiple cushion coats are applied to create a flexible, shock-absorbing layer, ensuring safety and comfort during play. Finally, two layers of UV-resistant acrylic color coats are applied to provide a durable, weatherproof, anti-skid, and seamless playing surface. The work also includes accurate layout and marking of court lines using synthetic white acrylic paint, ensuring compliance with standard volleyball dimensions. The system shall be capable of withstanding outdoor conditions, high UV exposure, and frequent use while maintaining surface integrity and appearance over the design life of the court.

Supplying, positioning, erecting, aligning, and fixing volleyball poles complete above the finished ground level, excluding foundation work. The poles (steel/GI as specified) shall be properly cleaned, painted or powder-coated, and fitted with all necessary accessories such as eye bolts, cleats, pulleys, hooks, and turnbuckles for net tensioning. The contractor shall ensure correct vertical alignment, spacing, and height as per standard volleyball court requirements, and securely fasten all fittings to enable smooth adjustment of the net. The system shall include provision for tightening ropes/wire cables using turnbuckles to maintain proper net tension. All exposed metal parts shall be protected against corrosion, and the installation shall be completed in a neat, safe, and workmanlike manner, ensuring durability, ease of operation, and proper functionality of the volleyball setup. with G I Pipe

Procurement, supply, and delivery of competition-quality volleyball net and associated accessories conforming to standard specifications. The net shall be made of high-strength, weather-resistant synthetic material (such as HDPE/nylon), of approved size and mesh, complete with reinforced edges, headband (PVC/Canvas), and side tapes for durability. The scope shall include all necessary accessories such as steel or synthetic tension ropes/ cables, side bands, antenna rods, hooks, and fastening arrangements required for proper installation and use with volleyball poles. All items shall be of reputed make, free from defects, and suitable for outdoor use, ensuring adequate strength, uniform tension, and long service life. The materials shall be supplied in good condition and as per approved specifications, ensuring readiness for immediate installation and play. with G I Pipe