Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹43.6 L+₹2.4 L (5.92%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹44.9 L+₹3.8 L (9.27%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹45.7 L+₹4.6 L (11.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹46.9 L+₹5.8 L (14.1%)Rejected-Finance 2 FLAT NO 2 B GEETHANJALI CLASSIK APARTMENT 9TH CROSS KAGGADASAPURA CV RAMAN NAGAR BANGALORE 560 093 | BENGALURU URBAN | KARNATAKA | 560093 | L5 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹84,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bangalore
GARRISON ENGINEER NORTH BANGALORE T 64 MEANEE LINES MEG AND CENTRE BANGALORE 560042
REPAIRS TO SHUTTERS WORKSHOP ROOFS JOINERY AND OTHER MISC WORKS IN CIW AND CICE IN THE AOR OF AGE B R MEG UNDER GE N BNG
2022_MES_532238_1
8307
Open Tender
Civil Works
Item Rate
180 days
BNG
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GARRISON ENGINEER NORTH BANGALORE
₹84,000
Yes
27 Aug 2022
20 Jun 2022
21 Jul 2022
20 Jun 2022
19 Jul 2022
6 Jul 2022
20 Jun 2022 - 5 Jul 2022
60 days
Amount
Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.
Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description all as specified and directed.
Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and directed.
Taking up or down 20 mm existing steel tubing and connections all as specified and as directed.
Taking up or down 25 mm existing steel tubing and connections all as specified and as directed.
S&F 20mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed
S&F 25mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed
Dismantling water tanks and removing to store (Exc 250 and not exc 500 ltr capacity) etc complete all as specified and directed.
Dismantling water tanks and removing to store (Exc 500 and not exc 1000 ltr cap) etc complete all as specified and directed.
M&L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and directed
All as per item No 1.10 above but except tanks
M&L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and directed
All as per item No 1.12 above but except tanks
S & F in repairs 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms].
S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
Dismantling of AC Sheets of any description in roof covering incl ridge, wind tie etc complete all as specified and directed.
Dismantling single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed.
All as per item No 1.18 above but portions bedded in cement mortar etc complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
Dismantling of timber scantling 40 sqcm and over in section, in any position in unframed work etc complete all as specified and directed.
All as per item No 1.21 above but in fillets, rails, posts, rafters, purlins etc under 40sqcm in section etc complete all as specified and directed.
Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced Exc 15 cm etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.
S&F Rolled mild steel in Main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plates of Fe-410W (Gde E-250) complete all as specified and directed
S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed Notes : Wks reqed to be carried out at hts exc 5.00 mtr & not exc 10.00. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on this account
S&F Asbestos cement two pices adjustable serrated ridge for corrugated or semi corrugated sheets ridges 6 mm thisk fixed with L type or J type or cranked bolt type etc complete all as specified and as directed. Notes : Wks reqed to be carried out at hts exc 5.00 mtr & not exc 10.00. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on this account
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed Notes : Wks reqed to be carried out at hts exc 5.00 mtr & not exc 10.00. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on this account
S&F pre painted galvalume Aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, pre fixed with self taping screwes as specified
S&F pre painted galvalume Aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tenisile strength of 550 Mpa as in roof covering/cladding / Ridges / Valley Gutter to wall, pre fixed with self taping screwes as specified
S & F grid suspended false ceiling grid system of size 600x600mm with main runner 29x24.7x0.8mm cross tee 29x24.7x0.8mm and wall angle 22.2x22.2x0.65mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling including taking down old celing of any description .
M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 all as specified and directed.
Except bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete / stone masonry surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement etc complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete / stone masonry surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement etc complete all as specified and directed. Note:- WPC shall be measured and paid separtely under relevant item
M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement etc complete all as specified and directed.
Supply only liquid water proofing compound
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed
Dismantling of Stone set paving of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed
M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in levelling course of flooing etc complete all as specified and as directed
M&L Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed
M&L Rendering 10mm thick in CM (1:3) on Brick work or stone masonry surface as backing coat of tiles complete all as specified and directed
M&L for vitrified ceramic light coloured tiles 8-10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
All as per item no 1.43 above but as in skirting / dado
M&L full bodied vitrified tiles 600x600x10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and directed by GE Make : Endura series of HR Johnson or equivalent of Kajaria/Somany
All as per item No 1.45 above but as in skirting / dado
M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of floor etc complete all as specified and as directed
M&L for cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate) 75mm thick as in plinth protection, laid in alternate bays (not exceeding 2 Sqm each) finished the concrete surface even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed
M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed
Supply and spreading of M-sand as cushioning material complete all as specified and directed
M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinforced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed
M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistent primer over 1mm thick putty complete all as specified and directed
M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer etc complete all as specified and as directed.
M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.
M&L for Complete removal of existing treatment on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistent primer over 1mm thick putty complete all as specified and directed
M&LPreparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall surfaces and applying one coat of oil bound distemper white or tinted all as specified & as directed.
All as per item No 1.57 above but in two coats
M & L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and providing rendering 10mm thick in CM (1:3) mixed with Water proofing compoundand over APP modified water proofing membrane matt finish, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc incl removing of debries outside premises etc complete all as specified and directed.
M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor etc complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor etc complete all as specified and as directed
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed /Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified etc. complete all as specified.
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
S & F 4mm thick tinted sheet glass and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc complete all as specified and as directed
S & F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed
S & F 8/9mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed to aluminum frame work as in doors etc complete all as specified and directed
S&F aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs
Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads all as specified.
S & F Sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.
S&F framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop / factory before fabrication complete all as specied and directed
S&F in repairs Steel Rolling shutter 1.25mm thick, gear operated type as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with level gear box and crank handle all as specified and directed
S&F in repairs Safety lever locks mild steel 4 levers for rolling shutters
S&F in repairs Ball bearing for rolling shutters
Repair and servicing of rolling shutters including taking down shutters and refixing in same opening of size exc 5 Sqm N.exc 10Sqm complete duly greasing, oiling, welding as required complete all as specified and directed
SARAVANA TRADERS
OM CONSTRUCTIONS
S N MANJUNATHA
Sreyas Enterprises
S SUDHAKAR
VIKAS CONSTRUCTIONS
MAA ENGINEERING SERVICERS
Elite Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .