ADDITION/ALTERATION AND IMPROVEMENT TO SMQs AND CIVILIAN QTRS (PHASE- I) AT AFA HYDERABAD

Amount

Demolition of cement Concrete in ground floors and paving n exc., 15 cm thickness (below or above ground level).

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for sunken floor, roof treatment, and similar works, etc all as specified and as directed

Demolition of reinforced concrete of any description not other wise specically provied for chimnies etc complete all as specified and as directed

Dismantling of stone slabs and tiles Laid, bedded and pointed in any mortar or of any description or any thickness in floors set in cement mortor complete all as specified

Demolition of brick/stone masonry built in cement mortar of any description, etc complete all as specified and as directed

Taking down existing roof treatment ,roughening of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed

Brushing neat cement slurry @ 3.0kg of cement per sq. metre complete all as specified and as directed

M & L Cement concrete type B-1 1:2:4 (20mm grades aggregate) in roof padding concerte with water proofing compound by weight of cement as per manufacturers instructions ,surface finished even and fair complete all as specified and directed (Note: WPC shall be measured & paid separately).

M & L Cement concrete type B-1 1:2:4 (20mm grades aggregate) in haunching concerte, coying, coping, on chajjas, approchable / unapprochable areas of any height, etc complete all as specified and as directed

Rendering 10mm thick in cm 1 : 4 mixed with water proofing compound by weight of cement as per manufacturers instructions on concrete/brick surfaces finished even and smooth without using extra cement complete all as directed (Note: WPC shall be measured & paid separately).

M&L for applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 150 Degree centgrade, lengitudinal tensile strength not less than 800N per 5 cm ,reinforcement tearing strenght of 180N by torch application with minimum of 10 cm side over laps and 15 cm end laps , Applying a coat of blown grade hot bitumen grade 90/15 over the membrane @ 1.20 kg/sqm as per manufacturer instructions complete as directed

S & F Cement concrete tiles 25-30 cm x 25-30 cm x 20 mm thick, machine pressed; set ,jointed with cement mortar (1:2) mixed with 5% of crude oil by the wgt of cement, over and including screed bed or bedding layer of 15mm thick in CM 1:4 complete all asspecified and directed.

M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg/Sqm complete all as specified and directed .

M&L for cleaning of surface thoroughly from dust projection and dirt by wire brushing and applying a coat of blown bitumen 85/25 @ 1.2 kg/sqm over a coat of bituminous primer over old existing APP surface and in entrances of rain water pipes etc, complete all as specified and as directed

Taking up or down 15mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

Fixing only 15 mm bore new steel tubing medium grade galvanised with all new fittings and fixed complete to walls, ceilings or laid in floors and pointing with CM 1:4 and making good as per existing etc complete all as specified and as directed. (Note: (i) GI pipe shall be issued under sch 'B' Free for fixing (ii)Quoted rate shall be deemed to included for provision of new GI fittings as per site requirement.

Fixing only, 20 mm bore new steel tubing medium grade galvanised with all new fittings and fixed complete to walls, ceilings or laid in floors and pointing with CM 1:4 and making good as per existing etc complete all as specified and directed.(Note: (i) GI pipe shall be issued under sch 'B' Free for fixing (ii)Quoted rate shall be deemed to included for provision of new GI fittings as per site requirement.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm & n exc 20 cm girth etc complete.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) average 25 mm thick with water proofing compond finished even and fair in bottom portion of sunken floor portion etc complete.

Taking down cement plaster on brick or stone walls,etc in sides of sunken portions., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M&L for rendering 15mm thick in CM 1 : 4 on fair faces of brick or concrete surfaces mixed with water proofing compound finished even and smooth in sunken portion without using extra cement etc complete as specified and as directed.

Material and labour for cleaning of surfaces thoroughly from dust or dirt by wire brushing and applying a coat of blown bitumen 85 / 25 @ 1.2 Kg per Sqm over a coat of bituminous primer and over that laying water proofing treatment of APP based polymeric membrane 3 Kg per Sqm, and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gm per sqm) laid on primed surface by forced application in sunken floor complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate filling and mass concrete etc complete as specified and as directed..

M&L for 25mm thick PCC type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base of floor tiles in sunken portion or in similar works, etc complete as specified and as directed.

Supply only intergral water proofing compound complete all as directed.

M&L for 40 mm dia GI pipe as spouts in sunken floors, medium grade etc complete all as specified and as directed

Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site, etc complete all as specified and as directed

M&L for Screed bed or bedding layer of cement mortar (1:6) 10mm thick for laying floor finishes.

S&F for Non skid ceramic, coloured, design printed tiles 7 to 8mm thick (square rectangular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust, etc. for preparation for tiling complete all as specified and as directed

M&L for spreading of Cera Bond Chemical at 6.00 Kg per Sqm for fixing floor tiles, etc complete all as specified and directed by Engr In Charge.

M&L for Glazed ceramic coloured tiles 400mm x 400mm x 7mm thick in floors and in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and directed by Engr In Charge.

M&L for rendering 10mm thick in cement mortar 1 : 4 on fair faces of brick or concrete surfaces rough finished to receive as backing of wall tiling etc complete all as specified and as directed.

M&L Glazed ceramic colour tiles, digital quality with highlighter, in vertical surface 375x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, all as specified and directed by EIC.

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:6) etc complete all as specified.

S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L rounding to edges of stone slabs one edge, in cooking plotforms complete all as specified

S&F in repairs of Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified.

S&F in repairs of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete..

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy Long nose, chromium plated fancy type with capstan head screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore etc complete.

S&F in repair of Bib taps, CP fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe etc complete all as specified and as directed

S&F in repairs of stop valves / angle cocks 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), 500mm to 550 mm in height, white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs of CP Bib taps two way 15 mm fancy type with capstan head handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified.

S&F in repairs of Health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe etc complete all as specified.

S&F in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for fluslhing cistern and connections to pipes including long bends etc complete all as specified and as directed.

Supply and fix in repairs, PVC connection 15 mm bore with brass cp nuts, of length 450 mm complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F in repairs for 20 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs for 15 mm CP shower rose with CP arm, all as specified and as directed

S&F in repair of stainless steel gratings 100mm dia, hinge or openable type, fixed with suitable solvent cement etc completed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or in floors, etc complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fxed to walls or in floors, etc complete all as specified and as directed.

Supply and fix 110 mm dia bore PVC (SWR) bends, any radius with oval access door, etc complete all as specified and as directed.

Supply and fix 75 mm dia bore PVC (SWR) bends, any radius with oval access door, etc complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) vent cowl, etc complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) branch piece, single (single ‘Y’ or ‘T’) equal or unequal with access door, etc complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) branch piece, single (single ‘Y’ or ‘T’) equal or unequal with access door,etc complete all as specified and as directed.

S&F Cast iron Nahani trap of 75mm size with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified.

S&F Cast iron floor trap of 100 mm size with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified.

Supply and fix in repairs Salt glazed stoneware gully trap, type P 125x100mm, including taking down existing of any description etc complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed

M&L for brickwork with sub class 'B' old size bricks, straight or curved on plan, exceeding 6M mean radius built in cement mortar 1:6 (for levelling) in parapets, and similar works complete all as specified and as directed.

M&L for half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 in parapets and in similar works complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,ceiling, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement.

M & L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces using WPC as per manufacturers instructions at any height with neccesary scafoldings, finished even smooth without using extra cement (WPC shall be measured paid seperately)

M & L for rendering 10 mm thick in cement mortar 1:4 on ceilings & soffits of stair case waist slab, beam bottom, etc, of concrete surfaces at any height with neccesary scafoldings, finished even and smooth without using extra cement.

Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion over a coat of Alkali resistant priming paint over a coat of 3mm thick wall care putty complete all as specified and as directed

Preparing of newly plastered external wall surfaces and applying two coats of cement based paint over a coat of cement primer, complete all as specified and as directed.

Preparing of newly plastered surfaces of ceiling and applying three coats white wash etc complete all as specified and as directed.

Complete removal of the existing treatment on walls and applying three coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Complete removal of the existing treatment on ceilings and applying two coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces on walls and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of the existing old treatment on walls and applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered or unplastered surfaces on walls including cornices by applying one coat of cement based paint , colour and all as specified and directed by the Engineer-in-Charge.

M&L for complete removal of existing painting on old plastered or unplastered surfaces on walls including cornices by applying two coats of cement based paint over a coat of cement primer, colour and all as specified and directed by the Engineer-in-Charge.

M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron Surfaces, plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F 3mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane and glazing with oil putty and glazing clip in metal/wooden frame and second class hard wood beading in wooden frame complete all as specified and directed by Engr in charge.

S&F 3mm thick figured glass, pin headed type, in squares n exc 0.5 sq. m each pane and glazing with oil putty and glazing clip in metal/wooden frame and second class hard wood beading in wooden frame complete all as specified and directed by Engr in charge.

Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 250 & n exc 500 ltrs including cleaning and removing all scale & dirt, etc from tanks , required reconnecting and re- fixing in position all scale and dirt etc from tanks and writting date of cleaning and due date of cleaning, etc all as specified and as directed.

S&F Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) ,three layered, hoisted and fixed in position including out let and inlet connections including dismantling existing water tanks of capacity 500 litres, all as specified in SSR part–I and as directed..

Supply and fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

Supply and fix in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

S&F in repairs, PVC Tank cover for 500 ltrs tanks, etc complete all as specified,

S&F in repairs brass chromium plated tubular curtain rails 20mm dia including fancy type curtain end finials set, etc complete all as specified and as directed

S&F in repairs 20mm dia fancy type brass chromium plated curtain end finials, etc complete all as specified and as directed

S&F in repairs brass chromium plated brackets for curtain rails, etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description of area exc 1.0 sqm but n exc 2 sqm

Material and labour PCC 1:2:4 type B1 using 20 mm graded aggregate for bed blocks for securing hold fast and the like including weathering, sligtly rounded or chamfered angles and throating, with necessary formwork complete all as specified and as directed. complete all as specified and as directed.

S & F Pressed steel frames 105x60mm size, for doors with single rebates including necessary fixing lugs, lock strick plate, etc, complete all as specified.

S & F Pressed steel frames 125x60mm size, for doors with double rebates including necessary fixing lugs, lock strick plate, etc, complete all as specified.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in filling of hollow portion of pressed steel frame etc complete all as specied and as direceted.

S & F 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix 35 mm thick factory made second class hardwood glazed / gauzed and skeleton door shutters , open rebated and prepared to receive glass, gauze, mesh etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.20 and fixed to chowkats complete all as specified and as directed.

Supply only Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed

S&F in Repair, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed

S&F for steel windows with side hung double shutters for fixing glass and wiremesh on either shutters, projecting type hinges with steel handles peg stay, complete with glazing barscomplete all as specified and as directed

S&F for steel ventilators with top hung shutters including hinges with steel peg stay, complete with glazing barscomplete all as specified and as directed

S&F for MS guard bars for windows/ventilators complete all as specified and as directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

Taking down shutters of any description exc 1 sqm but n exc 2 sqm and refixing the same in same openings after repairing, complete all as specified and as directed

Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply and fix butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed.

Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix tower bolt 200mm long, extruded aluminium anodised complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like,articles n exc 200 cu. cm each

Running welding in repairs of thickness of metal n exc 6 mm

Welding in repairs of thickness exc 6mm but n exc 9 mm and length exc 2.5cm but n exc 5.0 cm complete all as specified

Welding in repairs of thickness n exc 6mm and length exc 2.5cm but n exc 5.0 cm complete all as specified

Supply and fix in repairs stainless steel sink overall size 915mmx460mm bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Removing and refixing of existing stainless steel sink of any size, with plugs, washers, waste coupling and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed.

Material and labour for preparation and applying two coats of synthetic enamel paint over a coet of red oxide primer on newly treated steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed.

Supply and fix in repairs CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and average 15cm depth and getting out in hard/dense soil.

M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L Cement concrete in foundations, filling and mass-concrete, Type D2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed

M&L Cement concrete 75mm thick, type B-1, 1:2:4 (20mm graded aggregate) as in pavings, etc finished even and fair complete all as specified and as directed

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A, complete all as specified and as direceted.

Removing excavated surplus soil n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point.

Material and labour75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in , plinth protection, path etc., finished even and fair complete all as specified and as directed.

Removing of plants any type,any location /height ( i.e roof, parapet walls near pipes etc.) including roots by cutting into brick work / PCC / RCC including necessary scaffolding,and applying conc Acid after removing roots to prevent regrowth and making good the disturbed portion using PCC 1:2:4 Type B-O and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified & directed by Engr- in -Charge.

M&L for cleaning the spalled concrete covers, exposed reinforced corroded bars with water and applying two coats of ZINC RICH anti corrosive coat on bars and then replaster the same with cement mortar 1:4 of average thickness of 40mm, all around with WPC on ceilings & soffits of stair case waist slab, beams of concrete surfaces at any height with neccesary scafoldings, finished even and smooth without using extra cement with necessary bonding agent as directed. Make: Build core chemicals, STP limited, Dr.Fixit or equivalent approved by GE.

S&F corner cabinet of size 585x290x215, complete all as specified and as directed. Cat No; CC-252 of Pearl precision products or equivalent in prayag

S&F in repairs metallic CP Soap dish fixed horizontally to walls, complete all as specified and as directed

M&L for taking down existing pointing of any description including racking out joints, hacking for keys, scrubbing down with water and providing raised pointing to old brick/stone walls surfaces of any description, with necessary scaffoldings, by using cement mortar 1:3 complete all as specified and as directed.

M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion (in oil or kerosene based solution of chlorpyrifos 20 EC or Lindane 20 EC) @ 2.25 litres per linear metre including drilling and plugging holes etc., in apron etc all as directed by Enginee-in-Charge.

M&L Anti termite treatment for wooden frames of doors/Windows at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed

S&F in repairs, Dish/plate Display Rack Stainless Steel Hand Made - Wall Hanging (Approximte size 75x25x90 Cm), complete all as specified and as directed.

M&L for 18/19mm thick Marine plywood of First Grade , fixed with screws as in cupboards, all as specified and as directed.

M&L for 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, all as specified and as directed.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.

M&L for external teak wood lipping, 6mm thick, fixed with nails 19mm wide.

M&L for Second class hard-wood in scantlings, clean sawn, fixed to existing chowkats or to walls, etc complete all as specified and as directed

S&F in repairs, 50mm long double legged Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor, etc complete all as specified and as directed

Taking down the unserviceable point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ceiling roses pendent regulators, sockets etc any light points and making good disturbed surfaces of walls and floors etc complete all as specified and directed.

Taking down unserviceable MCBs, DBs, Main switches complete all as specified and directed.

Removing the existing metering board from the extg wall after removing the serviceable meters for refixing all as specified and directed.

Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet of size 1.0x0.9x0.2mtr and made out of 2mm thick CRCA MS sheet with front door having glass window for viewing KWH meter and other sides shall be opeque. All sides of door sholud have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint (shade : RAL 7032 SIEMENS GREY). The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories:-

(a) Four pole MCCB, 63Amps with breaking capacity of 16KA having adjustable thermal and fixed magnetic release.

(b) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code.

(c) Single phase KWH meters (05Nos)

(d) MCB SPN 32Amps, 10KA - 6Nos. (05Nos for meters, 01 for Spare)

(e) MCB SPN 10Amps-02 (1 for Security lights & Stair case & 01 for Spare)

(f) Analog type timer up to 16Amps capacity single phase 230volt for building security lights

(g) Two way bakelite connector with nut, bolts and wahsers suitable for connecting the outgoing wires in the cabinet - 6Nos.

(h) Internal wiring of meters / MCB / Cable connector shall be carried out with 10Sqmm copper conductor unsheathed, multistranded, PVC insulated, FRLS 1100volts grade, single core cable of standard colour code for phase & neutral including necessary lugs /nuts /bolts / washers etc.

(i) LED phase indicating lamps (RYB) with control MCB (SP-2Amps) - 3Nos.

Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet of size 1.0x0.9x0.2mtr and made out of 2mm thick CRCA MS sheet with front door having glass window for viewing KWH meter and other sides shall be opeque. All sides of door sholud have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint (shade : RAL 7032 SIEMENS GREY). The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories:-

(a) Four pole MCCB, 100Amps with breaking capacity of 16KA having adjustable thermal and fixed magnetic release.

(b) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code.

(c) Single phase KWH meters (08Nos)

(d) MCB SPN 32Amps, 10KA - 9Nos. (08Nos for meters, 01 for Spare)

(e) MCB SPN 10Amps-02 (1 for Security lights & Stair case & 01 for Spare)

(f) Analog type timer up to 16Amps capacity single phase 230voltage for building security lights

(g) Two way bakelite connector with nut, bolts and wahsers suitable for connecting the outgoing wires in the cabinet - 6Nos.

(h) Internal wiring of meters / MCB / Cable connector shall be carried out with 10Sqmm copper conductor unsheathed, multistranded, PVC insulated, FRLS 1100volts grade, single core cable of standard colour code for phase & neutral including necessary lugs /nuts /bolts / washers etc.

(i) LED phase indicating lamps (RYB) with control MCB (SP-2Amps) - 3Nos

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed.

M&L for point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core cable with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC conduit of suitable size with accessories fixed consealed in stone wall etc., Including terminal boxes made out of 1.2mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated Bakelite sheet for housing switches, sockets, regulators etc for One light point controlled by one one way 5 Amps switch Note (i) : Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

All as per item No 155 above but one light point controlled by two, two way 5 Amps switch

All as per item No 155 above but one ceiling fan /Exhaust fan point controlled by one 5 Amps switch

All as per item No 155 above but socket 5 amp on independent board.

All as per item No 155 above but one 3/5 pin socket out let 5 amp on same board with other switches.

All as per item No 155 above but one bell/buzzer controlled by one 5 Amps push button switch.

All as per item No 155 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuity cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fix switch socket combination 5 A/ 15 Amps 5 in 1, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5 Pin 5 Amps, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply & Fixing socket outlet 3/5 pin 5 Amp flush type ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type, single pole, two way, 5 Amps, 230 volts, ISI marked complete.ISI marked complete all as specified and as directed.

Supply and fix bell push , 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.

Supply and fix Bell Multi Music type AC 230 V complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type all as specified and as directed.

Supply & Fixing angle holder/batten holder insulated complete all as specified and as directed.

S&F surface mounting / wall mounted LED tube light fitting 1x18 to 20Wwatts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

S&F surface mounting / wall mounted LED tube light fitting 1x8 to 10watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

Supply & Fixing 1x10W LED Bulkhead fitting housing with high pressure die cast alluminium, poly carbonate front diffuser cover including LED driver, Lamp and all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size including taking out old unserviceable one complete all as specified and directed by Engineer-in-Charge.

S&F LED security light luminaries 20W including suitable in-built driver and complete accessories with MS housing finished & having clear acrylic cover, and provision of light grade GI pipe of 25 mm dia of 1.2 mtr for fixing of fitting after removing the unserviceable fitting complete all as specified and directed by Engineer-in-charge.

Supply & Fixing exhaust fan with louvers 300mm sweep, single phase 240 Volts, AC 50 Hz and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan complete all as specified and as directed. Note : Toilets & Kitchen

M&L for Sub Main wiring PVC insulated cable 2 single core 10sq mm 1100 V grade (nominal area) unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & capping of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete including taking out the existing sub-main wiring complete all as specified and directed by Engineer-in-Charge. Note (i): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for Sub Main wiring PVC insulated cable 2 single core 1.5sq mm 1100 V grade (nominal area) unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & capping of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of 1.5sqmm size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc. complete all as specified and directed by Engineer-in-Charge. Note (i): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Supply and fix Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.

MCB SPN 6 to 32A, 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

MCB SP 6 to 32A 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of SSR Part-I including taking down unseviceable earthing. Note (i) : Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the unit rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit,RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

Nisa Enterprises

Shetty Construction Co

ramesh construction co

M/s. P S REDDY

Rajesh Engineering Consultants

M/s JAYPEE ENTERPRISES

Dwarka Pershad Radhey Ramanlal