PROVN OF TOILET BLOCK, HARDSTANDING WITH INTERLOCKING TILES AND OTHER CERTAIN REVENUE AND MINOR WORKS AT MIL STN JAISALMER

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft/loose soil complete all as specified & directed by Engineer-in-charge.

Demolition of stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil all as specified & directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified & directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.

Rough excavation not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified & directed by Engineer-in-charge.

M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified & directed by Engineer-in-Charge

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.

Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 5 mm thick plaster in cement mortar (1:4) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick, plaster in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of stone masonry surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of block masonry surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on wall all as specified & directed by Engineer-in-charge.

S&F 1000 litres capacity, three layered, white colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engineer-in-charge.

S&F vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as specified & directed by Engineer-in-charge.

S& F Vitreous China urinals, half stall type, white excluding flushing cistern, flush pipe and waste pipe bowl type (back or corner wall type) complete all as specified & directed by Engineer-in-charge.

S&F vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, coupling, waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles of size 350 x 250mm x 7mm /450mmx350mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement all as specified & directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

M&L for 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25, 3 parts of sand by weight complete all as specified and directed by Engineer-in-charge.

M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

M&L PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in coping etc and like, including weathering, slightly rounded or chamfered angles and throating as directed with and includings necessary form work complete all as specified and directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate in window cills or door cills, lintels, bressumers, steps, quoin blocks, string courses, copings, knellers, apex stones, pier caps, columns, posts baluster (100mmx100mmx600mm), boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders, corbels, brackets etc with plain fair faces, including chamfers, weatherings, throating etc and setting in CM (1:4) complete all as directed by Engineer-in-charge.

M&L for 5cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exceeding 2.00 Sqm and refixing in other location each complete all as specified & directed by Engineer-in-charge.

M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25 to 35cm wide, hoisted and set, jointed and grouted in cement mortar (1:3) complete all as specified & directed by Engineer-in-charge.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in Padding complete all as specified & directed by Engineer-in-charge.

HIGH BUILD ELASTOMERIC LIQUID MAMBRANE (PU BASED): M & L For applying of polyurethane based tar extended seamless elastomeric protective coating system, conforming to ASTM C-836-03 and ASTM C 898-09 ideally suited for waterproofing of roof, walls and foundation MAKE: CICO CORCHEM 206I or equivalent in FOSROC/STP/SIKA/ BASF, following the single component solvent based polyurethane compound CORCHEM 2P or equivalent in FOSROC /STP/ SIKA/BASF recommended to be used as a primer before application of CORCHEM. Note :- Roof treatment to be carried by an authorise applicator of manufacturer as approved by GE before carriying of the work.

S&F 15 mm bore bib taps cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe for brass ferrule complete all as specified & directed by Engineer-in-charge.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified & directed by Engineer-in-charge.

S & F 4 mm thick figured Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer all as specified & directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) all as specified & directed by Engineer-in-charge.

S&F Jet spray for EWC complete all as specified & directed by Engineer-in-charge.

S&F stainless steel soap dish of standard size fixed with chromium plated screws all as specified & directed by Engineer-in-charge.

S&F swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms) all as specified & directed by Engineer-in-charge.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed by Engineer-in-charge.

S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified & directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified & directed by Engineer-in-charge.

S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed by Engineer-in-charge.

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified & directed by Engineer-in-charge.

S& F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing (ISI marked) medium grade galvanised, 15mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing (ISI marked) medium grade galvanised, 20mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F 15 mm bore stop cock, fancy type, chromium plated, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F of Grating doom 100mm dia of PTMT (Minimum weight 25Gms) complete all as specified & directed by Engineer-in-charge.

S&F 20 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F ball valves for 15mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as directed by Engineer-in-charge. (minimum weight 142 gms)

S & F 450 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed by Engineer-in-charge.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.

S&F 150 mm long Aluminium handles, cast type, anodised complete all as specified & directed by Engineer-in-charge.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling all as specified & directed by Engineer-in-charge.

S&F 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified & directed by Engineer-in-charge.

S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

M&L 100 mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement conrete (1:2:4) type B-1 complete all as specified & directed by Engineer-in-charge.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed by Engineer-in-charge.

M&L for 150mm dia salt glazed stoneware drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM (1:1) and tested complete all as specified & directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe complete all as specified & directed by Engineer-in-charge.

M&L for Construction of Septic tanks, excavation in any type of soil, foundation in PCC 1:2:4, stone masonary in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 50 users complete all as as specified and as directed by Engineer-in-charge shown on drawings (Refer TD drg No. CEJZ/TD/31 dt. 14 Dec 2013 Sheet No. 1/3 to 3/3).

M&L for Construction of Soakage wells excavation in any type of soil, foundation in PCC 1:3:6, wells of honeycomed and solid in M-25 concrete, including intercepting chamber, screed chamber, stone masonary work in CM RCC cover slab in M-25/RR masonary/Filling with brick bats complete for 20 users of size 1.2.m dia x 3.00 mtr deep complete all as as specified and as directed by Engineer-in-charge shown on drawings (Refer TD drg No. CEJZ/TD/29 dt. 14 Dec 2013 Sheet No. 1/3).

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 Mtr and making good surface all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified & directed by Engineer-in-charge.

S&F rolled mild steel roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleat etc conforming to Fe-410-W Gde E-250 quality-A all as specified & directed by Engineer-in-charge.

M&L, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engineer-in-charge. Note :-Fixing only chain link fencing, steel round bars for protection will measured and paid separately.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge. Note :-Supply only chain link fencing will measured and paid separately.

S&F mild steel Round bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W Gde E-250 quality-A all as specified & directed by Engineer-in-charge.

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.

S&F angle iron as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.

S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.6 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following:-

(a) One light point controlled by one switch.

(b) One exhuast fan point controlled by one switch.

(b) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(c) One socket outlet 6 amp controlled by one switch on indepdendent board.

M& L for Point wiring with 1100 volts grade PVC insulated FR multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.6 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete all as specified & directed by Engineer-in-Charge. Note for item No. 91 & 92 :- Rate quoted shall be deemed to inclusive of cutting chasses and making good with existing specifications.

S&F switch piano flush button single pole one way 6 amp complete all as specified & directed by Engineer-in-charge.

S&F switch piano flush button single pole one way 16 amp complete all as specified & directed by Engineer-in-charge.

S&F socket outlet 2 in 1, 3 pin, 6 & 16 amp flush type complete all as specified & directed by Engineer-in-charge.

S&F for socket outlet multipurpose having provision for 2 in 1, 3 pin 6 amp piano flush type complete all as specified & directed by Engineer-in-charge.

S&F ceiling rose 3 plates polycarbonate body complete all as specified & directed by Engineer-in-charge.

S&F surface and wall mounted LED tube light along with fixture, 4 ft, 22W, extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C, power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified & directed by Engineer-in-charge.

S&F LED tube light fitting 10 watt tube LED Neutral white in colour, 600 mm in length wall mounted LED batten,extruded aluminium heat shink provided for efficient heat dissipation & integrated electronic driver,optic diffused type ENDURA LINER NEO including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified & directed by Engineer-in-Charge.

Supply and fixing of building security light fitting LED 35 watt IP65 with fixing arrangment such as GI pipe bracket 40 mm grade, 1.2 mtr long, MS, Clamp, Nut Bolts etc and connecting as specified and directed. Make : havells Cat No ENDURACITYLITEPLATPLATPLUSSL35WLED757SASYBOPC or equivalent in Appx 'C'l list of Makes.

S&F MCB distribution board TPN, 415 volts, 4 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified & directed by Engineer-in-Charge.

S&F MCB distribution board SPN, 240 volts, 8 ways double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified & directed by Engineer-in-charge.

Supply and fixing 415 V 10 KA 'C' curve miniature circuit breker (MCB) of TPN 63 to 100 Amps four pole and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

Supply and fixing MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed.

Supply and fixing MCB's single pole 20 Amps to 32 Amps, 240 Volts, 10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.

S&F exhaust fan steel body AC single phase 230V of size 300 mm sweep with blades and frame and louvers with cutting of provision wall complete all as specified & directed by Engineer-in-charge.

M& L for submain wiring with approved colour code /as per IS (Red, black & Green for single phase ) circuit with two single core PVC insulated cable with multistandered copper conductor are of 6.00 Sqmm (FRLS) in suitable concealed condit size not less than 20 mm dia incluuding one run of PVC insulated multistranded copper conductor nominal cross sectional area of 6.00 Sqmm (FRLS) of continuous earth wire green in colour complete all as specified & directed by Engineer-in-Charge. (Note :- (i) Two run of 6.00 sqmm cable & one run of 6.00 Sqmm cable as earth wire and one run of PVC Conduit shall be measured & paid as one unit length.) (ii) Rate quoted by contractor deemed to be inclusive of cutting chasses and making good with existing specification.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to galvanized iron wire 4mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and pcc cover and testing on completion all as specified & directed by Engineer-in-charge.

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

M&L for cutting the existing 80mm pipe CI/GI and reducing to required length in position for insertion and including new tees 80x40x40mm complete all as specified and directed by the Engineer-in-Charge.

Supply and lay 40mm bore pipe galvanised iron, medium grade (ISI marked) complete with fittings (ISI Marked) laid in trenches, jointed and tested complete all as specified and directed by Engineer-in-charge.

Supply and lay 25mm bore pipe galvanised iron, medium grade (ISI marked) complete with fittings (ISI Marked) laid in trenches, jointed and tested complete all as specified and directed by Engineer-in-charge.

S&F gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 40 mm bore sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer in Charge .

Supply and fix stop valve cast copper alloy screwed 25mm dia down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified & directed by Engineer-in-charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified & directed by Engineer-in-charge.

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge . Note :- Punned thickness of sand cushioning only measured for the purpose of payment.

Supply & laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone patti cable cover 25 cm to 30cm wide and n.exc 60 cm long each laid dry abutting with each other with maximum gap between adjustment slabs n. exc 10 mm complete all as specifeid & directed by Enginner-in-charge.

M/S MAYA CONSTRUCTION COMPANY

S K TRADER

GEMRARAMCONTRACTOR

M/s Shri Inder Construction Company

BHAGWATI CONSTRUCTION