Repairs to brick work ceiling plaster and other miscellaneous work of JCOs/OR single living accn (P-95, P-120 , P-111) , JCOs/NCOs Mess of HQ CEDZ, Office complex of HQ CWE(U), GE(U) Water Supply, GE(U) Electric Supply and GE(U) PM Area under AGE(I)

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding ( including backing) removing from site and rubbish off premises.

M & L for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade / colour / matrix of the tiles complete.

S & F Vitrified ceramic tile light shade 8 to 10mm thick light shade (square / rectangular) polished, area of each tile not exceeding 0.36 sqm , over 15 mm thick screed bed in Cement Mortar 1:4 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

S & F Vitrified ceramic tile 8 to10 mm thick light shade (square / rectangular) polished, area of each tile not exceeding 0.36 sqm over 10 mm thick plaster in Cement Mortar 1:4 as in vertical surface like skirting dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface such as skirting / dado etc, of size 350 x 250 x 7mm thick or 450 x 350 x 7 mm thick over and including 10 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade / colour / matrix of the tiles.

Demolition of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles.

M&L for brick work using sub class 'B' brick old size in cm (1:4) straight or curved on plan exceeding 6.00 mtr mean radius , including removing mortar , wire brushing and cleaning to old brick for re-use complete all as specified, but except brick

Taking down loose/damanged/breakage concrete of any description from reinforced cement concrete of columns, beams ,slab , bracing , chajjas fins facia and wall etc by hammering with wooden malate carefuly without damaging existing serviceable structure, chipping old concrete for receiving concrete, incl cleaning the existing surface of concrete and removing rust particle from existing exposed reinforcement of any dia by scraping with wire brush/emery paper or by grinding in certain portion of RCC membr and applying one coat of wonder bond - FA or equivalent for bonding new concrete with old concrete surfaces as per manufacture's printed instruction and grouting with RCC 1:1.5:3 type A-0 (nominal mix) using 6mm and down graded crush stone aggregate /chips ) for restoring slabs, walls, lintel beams,columns, etc complete

Demolition of concrete in ground floor & paving not exc 15 cm thick( above or below GL) including finishes /stone slab etc complete all as directed)

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, leveling course or filling in foundation in mass concrete complete all as spd and directed by EIC.

M&L for cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate (25 mm thick) as in floor finished even and fair complete all as spd and directed.

M&L for 18-22 mm thick mirror polished kota stone, machin cut kota stone slab flooring over 20mm cement screed bed in CM (1:4), and jointed in neat cement slurry mixed with pigment to match the shade of slab complete all as spd .

M&L for PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate) , 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filling in the joint complete.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, inclu taking down roots of trees complete etc. complete all as specified and directed.

M&L for Rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement.

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note : rate to be quoted by bidder inclusive WPC)

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as spd

M&L for rendering 5 mm thick in CM 1:3 on ceilling finish even and smooth w / o using extra cement complete all as spd and directed.

M&L for prepration of newly plastered surfaces on ceiling and applying three coats white wash complete all as spd .

M&L for applying one coat white wash on old decorated ceiling surface including preparation of old surfaces & filling cracks and holes with white cement or cement morter 1:2 complete .

M&L for applying one coat of Oil emulsion distemper on old decorated wall surfaces including preparation of old surfaces & filling cracks and holes with white cement or cement morter 1:2 to match the existing new plaster surface

Hacking out old broken glass any thickness size and quality from wooden/steel frames drilling out old glazing pin/clip etc complete.

S & F for 3.0mm thick sheet glass ordinary quality and glazing with oil putty and glazing pin/clip in squares not exc 0.5 sqm in each pane etc complete all as spd and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden bead with nails etc complete.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets .

M & L for Non-asbestos ceiling board 0.60 X 0.60 mtr X 4 mm thick,fixed with powder coated GI framing including drilling hole,screwing for fixing GI frame work all as specified and directed by Engg-in-Charge.

S&F for aluminium anodised snap grid frame work of size 605x605 mm comprising with GI powder coated Angle & Tee including necessary GI wire 3.30 mm thick suspender for ceiling, GI powder coated angle along wall to be fixed with screw by drillling holes in to brick wall or concrete surfaces all as specified.

Taking up or down steel tubing and connection of 20 mm bore complete all as directed.

Refixing only GI tubing 20 mm bore medium grade with all fittings and fixed to wall complete all as specified.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall.

Taking up or down steel tubing and connection of 15 mm bore.

Refixing only GI tubing 15 mm bore medium grade with all fittings and fixed to wall.

S&f GI tubing 15 mm bore medium grade with all fittings and fixed to wall.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth.

S&F in repairs of bib tap 15 mm dia fancy type chromium plated cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed.

S&F in repairs of stop valve /angle cock 15 mm dia Chromium plated fancy type cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed.

S&F in repair Pillar tap 15mm dia, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed.

S&F in repairs brass choromium plated shower rose 125mm size with shower arms complete all as spd and directed.

S & f in repairs for vitreous china squatting pan orrisa pattern 580mmx440mm with integrated foot rest, S or P trpa including cement concrete bedding complete.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F in repairs Plastic water closet seat, , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs PVC valve less syphonic action type low level flushing cistern 10 ltr, white with inlet ball valve float and handle including bracket with flush pipe of polythene of low or high density 32 mm PVC.

Taking down SWR pipe (any size and pattern including all fittings heads shoes bends etc complete all as spd.

S&F PVC (SWR)110 mm bore Pipes single socketed ,in any length with rubber ring joints fixed to walls.

S&F PVC (SWR)110mm bends any radius.

S&F PVC (SWR)110 mm bore branch piece ,single socketed (Single Y) equal or unequal.

S&F PVC (SWR) 75mm bore Pipes single socketed ,in any length with rubber ring joints laid in trenches or in floor etc complete

S&F PVC (SWR) 75mm bends any radius.

S&F PVC (SWR) 75mm junction single, (singel T) any radius

S&F PVC (SWR) 75mm dia floor trap plain with grating in jointing with solvent cement complete.

S&F in repairs Vitreous China Urinal, Half stall type,white including waste pipe, fixing in brackets incl urinal sprader of PTMT any colour for fixing with 15mm dia pipe

S&F in repairs Vitreous china squatting plate urinal,white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repair Vitrous china wash basin, white, flat back, size 630x450mm excluding taps, incl.waste coupling brackets and flaxible waste pipe complete all as spd and directed.

S&F in repair PVC connection 15 mm dia, 450 mm long including brass fly nuts at both ends etc.complete

Dismantling water tank of cap n. exc 500 ltr and removing off site complete all as spd

Dismantling water tank of cap exc 500 ltr but n. exc 1000 ltrs and removing off site complete all as spd

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltr hoisted and fixed in position incl 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR Part I

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr hoisted and fixed in position incl incl 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR Part I

S&F in repair Gun metal gate valves 20 mm dia with iron wheel head ,screwed both ends for iron pipe and fixed complete.

Taking down rolling shutters complete pull/push or gear operated/ manually type including servicing, repairing all moving mounted parts / components (including locking arrangements) necessary welding easing, adjustment , replacing unseviciable hood cover wherever required, greasing etc and refixing in the same location all as specified and ditected.

Supply only mild steel 1.25mm thick black sheet as in top cover for rolling shutter fixed to wall in proper size , shape & position suitable for rolling shutter including removing damaged portion and applying one shop coat of primer before fixing complete all as directed.

M&L for PCC 1:2:4 type B0 (using 12.5/10 mm graded stone aggregate )as in hold fast complete all as spd.

B. S BUILDERS