Loading
Loading…
Loading…
Tender Value
₹6.3 L
EMD Value
₹12,700
Closing Date
27 Oct 2026, 1:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
MECH
10 conditions · 5 needing a document upload
Please go through the uploaded tender document & provide all the details and upload relevant documents accordingly. Please ensure that the required Annexures in the tender document are duly filled up, signed and uploaded.
The tenderer shall have to upload the complete bank details such as Bank Name, Account No., IFSC code, PAN No. etc of his firm with the tender (as per Annexure M of the Tender Document)
It is brought to the notice that manual/ offline mode of payment through Demand Draft, Banker's cheque, Cash Deposit receipts etc. shall not be available in this tender. The tenderer have to make payment towards Bid Security cost in this tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal or submission of Bank Guarantee bond from a scheduled commercial bank of India valid for a period of 90 days beyond the bid validity period as per clause no. 5.(2) of GCC for Works Contract of Indian Railways.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Calibration of Measuring Instruments, Gauges and Testing Devices.
08-CWS-MYSS-2026-27~SWR
08-CWS-MYSS-2026-27
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹12,700
6 Oct 2026
6 Oct 2026
13 Oct 2026
1279 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,34,662.53 | ||
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp meter 0-1000 A(AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Ohm meter 1.999 Ohm to 19.99 K ohm meter | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Digital insulation tester 50-100, 250-1000 V | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital Multi meter 0-1000 volts (AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Multi meter0-1000 volts (AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Multi meter0-1000 volts (AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Multi meter0-1000 volts (AC/DC) | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Vernier Caliper0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Digital Insulation Tester5 KV | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Digital Lux Meter0-200000 LUX | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Lux Meter0-200000 LUX | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| LCR Meter C-200uF to 20 MF R -200 - 2000 M | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| RPM Meter1-5000 RPM | — | — | — | 669.8 | |
| — | 1.00 | — | — | ||
| RPM Meter1-5000 RPM | — | — | — | 669.8 | |
| — | 1.00 | — | — | ||
| Battery Analyzer Meter6V - 600V 3M to 300 M | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-14 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Digital outside Micrometer 50-75 MM | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Digital outside Micrometer 125-150 MM | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer 50-75 MM | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Dial Bore Gauge160-250 MM | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Vernier caliper0-300 MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Digital outside Micrometer100-125 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Digital outside Micrometer75-100 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Digital three lug micrometer80-100 mm | — | — | — | 1,395.4 | |
| — | 1.00 | — | — | ||
| Digital inside Micrometer225-250 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Digital three lug micrometer with ring gauge100-125 mm | — | — | — | 1,395.4 | |
| — | 1.00 | — | — | ||
| Digital three lug micrometer with ring gauge150-175 mm | — | — | — | 3,069.8 | |
| — | 1.00 | — | — | ||
| Digital three lug micrometer with ring gauge125-150 mm | — | — | — | 1,395.4 | |
| — | 1.00 | — | — | ||
| Digital outside micrometer175-200 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Digital Vernier Caliper0-300 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| PRESSURE GAUGE0-280 KG / CM2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| VERNIER CALIPER0-150 MM | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Outside Micrometer100-125 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer150-175 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer175-200 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer175-200 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer200-225 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer225-250 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer225-250 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer225-250 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer Analog250-275 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer250-275 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer250-275 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer275-300 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer300-325 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer150-175 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer175-200 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Inside Micrometer50-300 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer50-300 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer 50-300 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer50-200 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Wheel Flange Thickness Gauge15-30mm | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Vernier Calipers0-150 mm | — | — | — | 167.5 | |
| — | 1.00 | — | — | ||
| Vernier Calipers0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier Calipers0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier Calipers0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Digital Vernier Calliper0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier Calipers0-300 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge800-1010 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge900 - 1100 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge 800-1010 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge900-1100 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge900-1100 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| 3 Point Wheel Diameter Gauge600-1100 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Distance Gauge1590-1610 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Wheel Distance Gauge1590-1610 mm | — | — | — | 1,172.1 | |
| — | 1.00 | — | — | ||
| Bore Dial Gauge100-160 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Bore Dial Gauge100-160 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Bore Dial Gauge100-160 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Bore Dial Gauge250-400 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Dial Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Dial Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Dial Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Dial Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge130 mm | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge144 mm | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge209.530 mm | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge 144.464 +0.0224/- 0.0225 mm | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer with ring gauge 200-225 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer with ring gauge 150-175 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Three Pin Micrometer with ring gauge200-225mm | — | — | — | 4,465.1 | |
| — | 1.00 | — | — | ||
| Three Pin Micrometer with ring gauge200-225mm | — | — | — | 4,465.1 | |
| — | 1.00 | — | — | ||
| Three Pin Micrometer with ring gauge125-150mm | — | — | — | 1,395.4 | |
| — | 1.00 | — | — | ||
| Digital Residual Field Indicator +10 or -10 gauss | — | — | — | 6,530.2 | |
| — | 1.00 | — | — | ||
| Outside micrometer200-225mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Vernier calliper0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier calliper0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier calliper0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Insulation resistance tester50-100, 250-1000 V | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Multimeter0-1000 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Multimeter0-1000 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Multifunction Tester0-1000 V | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| LCR Meter 0.1 PF - 20 MF 0.010 HMS - 200 M OHMS | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Digital LUX Meter1000 to 100000 LUX | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Tacho Meter01-5000 rpm | — | — | — | 669.8 | |
| — | 1.00 | — | — | ||
| Outside Micrometer0 to 25 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Shore-D Hardness Durometer 0 - 100 | — | — | — | 446.5 | |
| — | 1.00 | — | — | ||
| Shore-A Hardness Durometer 0 - 100 | — | — | — | 446.5 | |
| — | 1.00 | — | — | ||
| Flow cup viscometer Fordcup (B4) Made up of Brass 60-300 CST | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Grease Penetrometer0-400 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| IIW BLOCKS | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Rockwell Hardness Testing MachineLoad 750-3000 kg Dia 5mm-10 mm | — | — | — | 7,618.6 | |
| — | 1.00 | — | — | ||
| Brinell Hardness Testing MachineMake - Globolytics instruments Pvt Ltd. | — | — | — | 7,032.6 | |
| — | 1.00 | — | — | ||
| Flow cup viscometer (Kinematic Viscometer Bath (Digital) | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital Ultrasonic Flaw DetectorEinstein - II ( R ) /Sr.No.E5124-0318 | — | — | — | 15,069.8 | |
| — | 1.00 | — | — | ||
| Digital Ultrasonic Flaw DetectorArya - I ( R ) / Sr.No.AA0192-0230 | — | — | — | 15,069.8 | |
| — | 1.00 | — | — | ||
| Digital Ultrasonic Flaw Detector0-300 mm | — | — | — | 15,069.8 | |
| — | 1.00 | — | — | ||
| Electric Balance0.0001 to 200 gms | — | — | — | 2,009.3 | |
| — | 1.00 | — | — | ||
| Digital Surface Profile gauge0-1000 Microns | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| DFT Gauge0-2000 microns | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Flow cup viscometer 60-300 CST | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital Coating Thickness Gauge (DFT Gauge)0-1250 Microns | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Digital Surface Profile gauge0-1000 Microns | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Gloss Meter Digital - 60 Head60 Angle | — | — | — | 1,841.9 | |
| — | 1.00 | — | — | ||
| Tri Gloss Meter with specular Gloss 20 , 60, 85 Angle | — | — | — | 1,841.9 | |
| — | 1.00 | — | — | ||
| Elec.Weighing Scale0.040-20 Kg | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Elec. Weighing Scale0-200 Kg | — | — | — | 2,790.7 | |
| — | 1.00 | — | — | ||
| Welding fillet gauge 0-20 mm depth angle 0-60 degree | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Welding fillet gauge 0-20 mm depth angle 0-60 degree | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Welding fillet gauge 0-20 mm depth angle 0-60 degree | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Welding fillet gauge 0-20 mm depth angle 0-60 degree | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Welding fillet gauge0-20 depth angle 0-60 degree | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electrode hand oven50 TO 300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Mother Oven0-300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Mother Oven0-300 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electronic weighing machine0-300 KG | — | — | — | 3,348.8 | |
| — | 1.00 | — | — | ||
| Digital Vernier Calliper, TYPE ED-300 to 300mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Digital Vernier Calliper TYPE ED-300 to 300mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Digital Vernier Calliper TYPE - ED-100-150mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Vernier calliper "0 to 300mm(0.1 mm)" | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Digital coating thickness gauge, ID NO: 51118070080-1500 microns (0.1 mm) | — | — | — | 1,060.5 | |
| — | 1.00 | — | — | ||
| Infrared Thermometer-20°C to 500°C | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Infrared Thermometer -20°C to 500°C | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-21 KG/CM 2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-21 KG/CM 2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-70 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-70 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-420 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-1060 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-1060 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-1700 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-1700 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-1700 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-2340 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-2340 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-2340 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-2340 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 BAR | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-400 BAR | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-400 BAR | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 BAR | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-250 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-280 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 Bar | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-1060 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-100 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-10 KG/CM 2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-420 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| OIL TEMPERATURE GAUGE0-100 | — | — | — | 535.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-280 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-280 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-1000 KG/CM 2 | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| OIL TEMPERATURE GAUGE0-100 | — | — | — | 535.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-105 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-105 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-70 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-700 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-700 KG/CM2 | — | — | — | 558.2 | |
| — | 1.00 | — | — | ||
| OIL TEMPERATURE GAUGE0-100 C | — | — | — | 535.8 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge0-200 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-200 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-600 Kg/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-210 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 BAR | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Hydraulic pressure gauge 0-400 KG/CM 2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| OIL TEMPERATURE GAUGE0-100 C | — | — | — | 535.8 | |
| — | 1.00 | — | — | ||
| LOAD CELL of Nencki at smithy (HPG) Pressing Machine 30 ton capacity | — | — | — | 8,539.5 | |
| — | 1.00 | — | — | ||
| HYDRAULIC PRESSURE GAUGE for centre buffer coupler press at CLSYSCON SI-50 F DIGITAL READ OUT DISPLAY(In TON) | — | — | — | 4,520.9 | |
| — | 1.00 | — | — | ||
| Digital pressure sensor and load cell0-200 BAR | — | — | — | 4,520.9 | |
| — | 1.00 | — | — | ||
| Digital pressure sensor and load cell0-200 BAR | — | — | — | 4,520.9 | |
| — | 1.00 | — | — | ||
| Digital pressure sensor and load cell0-200 BAR | — | — | — | 4,520.9 | |
| — | 1.00 | — | — | ||
| Digital pressure sensor and load cell0-200 BAR | — | — | — | 4,520.9 | |
| — | 1.00 | — | — | ||
| Vernier calliper 0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Torque wrench tester10-350 Nm | — | — | — | 3,125.6 | |
| — | 1.00 | — | — | ||
| Torque wrench tester100-1000 Nm | — | — | — | 3,125.6 | |
| — | 1.00 | — | — | ||
| Digital true RMS Clamp Meter AC/Fluke-376 0-1000 V, 0-1000 A | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital true RMS Clamp Meter AC/Fluke-376 0-1000 V, 0-1000 A | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Clamp Meter AC/DC Kusam-Meco0-750 V, 0-600 A | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Clamp Meter AC/DC Kusam-Meco0-750 V, 0-600 A | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Clamp Meter AC/DC Kusam-Meco 0-750 V, 0-600 A | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Tacho meter/HTM - 56060-100000 RPM | — | — | — | 669.8 | |
| — | 1.00 | — | — | ||
| Digital Tacho meter/HTM - 56060-100000 RPM | — | — | — | 669.8 | |
| — | 1.00 | — | — | ||
| Digital Lux meter/Meco - 930 T0-200000 Lux | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital insulating Resistance Tester & Digital Multimeter/G Tech500-1000-2500 V | — | — | — | 1,953.5 | |
| — | 1.00 | — | — | ||
| Digital Earth Resistance Tester/WACO 5 Ohm & 500 Ohm | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital Infred thermo meter/centric - 20 to 500 deg C | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.8 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250- Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function MeterC1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Multi Function Meter C1 1.0 MC 1250 - Current sec 0.05-5A, 5A/1A V Input : 50-520 VAC, 40-70 Hz | — | — | — | 3,348.9 | |
| — | 1.00 | — | — | ||
| Digital Pressure Gauge0-150 kg/cm2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Digital Pressure Gauge0-150 kg/cm2 | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Digital infrared Thermometer 30 to 500 | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital infrared Thermometer 30 to 500 | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Digital infrared Thermometer 30 to 500 | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Outside Micrometer300-400 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Surface Roughness Tester & Test PieceRa 0.05 to 10um / 2 µinch | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge22 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge 22 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge 24 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge24 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge 25 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge 26 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge 26 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge27 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge27 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge28 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge28 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge29 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge29 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge32 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Wheel Profile Gauge32 mm | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Digital Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Digital Snap Gauge125-150 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer425-450 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer with ring gauge 325-350 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer with ring gauge300-325 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| 3 Legged Inside Micrometer with ring gauge 250-275 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Dial Gauge 0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge 0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge 0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 245.6 | |
| — | 1.00 | — | — | ||
| Digital Vernier Caliper0-300 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Vernier Caliper0-300 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Outside Micrometer 200-225 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer225-250 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer275-300 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Gauge for side bearer wearing plate thickness"GO:10.00mmNOGO: 8.50 mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A36.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A48.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A45.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge bush draft yoke holeNOGO:33.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for cotter holeNOGO:16.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Buffer plunger stroke"127.0 (+0/-3.0)mm & 127.0(+0/-3.0)mm" | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Buffer plunger stroke"127.0(+0/-3.0)mm & 127.0(+0/-3.0)mm" | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A25.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for draft width of draw bar NOGO:40.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for draw gear pinNOGO:30.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for crown clearancedimension-A"36.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Trunion-LH/RH knuckle-threadprofile gauge"55.635X6.35 mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "gauge for trunion 76mmthickness"NOGO:72.00mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "A-Gauge for checking radious of buffer faceplate. B-Buffer radiusgap cheking gauge""R:1905.00 mm,11.0 mm" | — | — | — | 167.5 | |
| — | 1.00 | — | — | ||
| Gauge for side bearer wearing bronze piece GO:45.0,43.50 mm NOGO:42.0 mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A45.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A48.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for bogie bolster clearance 40.0 mm (+/-5) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for body bogie clearance70.0 mm (+/-3.0) | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for side bearer wearing plate thickness"GO:10.00mmNOGO: 8.50 mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for checking radius of buffer faceplateR:1905.00 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Gauge for thikness-Draft key"NOGO-32.00mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for side bearer wearing bronze piece GO:45.0,43.50 mm/ NOGO:42.0 mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for draft width of draw bar NOGO:40.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for draw gear pin (DIA-31 mm)"NOGO:30 mm,Normal Dia- 31.00mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Buffer plunger stroke measuringgauge"127.0mm-126.0 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Gauge for Draw bar slot widthNOGO:40mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for pin on draw hook (NOGO) NOGO:58 mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for Drat key slot (NOGO)NOGO: 173 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Gauge for hole on straight linkNOGO:63mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for Bent Link stem Ø42 mm "NOGO 39.00mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| GAUGE FOR BENT LINK HOLE "NOGO 49.00mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for bent link U-GAP"GO:77 mm,NOGO: 85 mm" | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge bush draft yoke holeNOGO:33.00mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Buffer Height Measuring Gauge Fitted with Olain Scale Model- BHG-1(0)900-1120 mm | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| KNUCLE NOSE WEAR & STRETCH LIMIT GAUGE (APTA Gauge No- 34100-2A) | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| NOGO GAUGE VERTICAL HEIGHT ALIGNING (APTA Gauge No- 44250-5)NOGO:162 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| GO GAUGE VERTICAL HEIGHT ALIGNING (APTA Gauge No- 34101-4)GO:177.99 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| ALIGNING WING LIMIT GAUGE (APTA Gauge No-32600) | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| CONDEMNING LIMIT TIGHT LOCK COUPLERS (APTA Gauge No-34100-1)88.90.mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| CONTOUR MAINTENANCE GAUGE (KNUCLE PROFLIE GAUGE) APTA Gauge No-31000 | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| "Gauge for draw hook bottomside shank HT (56 mm)""NOGO-41.00mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for hole on straght linkNOGO:63mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for Trunion Knukle pin(Ø46mm)" NOGO:44mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for Drat key slot (NOGO)NOGO: 164 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Gauge for Draw hook -62 dia pin holeNOGO:65.00mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for side bearer wearingplate thickness""GO:10.00mmNOGO: 8.50 mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Profile gauge with 5mm adjustable projection for draw hook seating (0=139 mm) | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| Profile gauge for Draw hook root of contact with bent link (15 mm adjustable) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| K-tread profile gauge for Draw bar .Size M-39 x 3mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| screw pitch(K-tread) profile gauge for screw55X6.35 mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A(42.0mm-48.00 mm)45.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A (22.00 mm-28.00 mm)25.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A (45.00 mm-51.00 mm)48.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A(42.0mm-48.00 mm)45.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for crown clearance dimension-A (45.00 mm-51.00 mm)48.0 mm (+/-3.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for bogie bolster clearance. 40 mm-46 mm40.0 mm (+/- 5.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for bogie bolster clearance. 35 mm-41 mm35.0MM (+/- 5.0) | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for body bogie clearance.67 mm-73 mm"70.0 mm ( +/- 3.0) | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for side bearer wearing plate thickness":10.00mmNOGO: 8.50 mm" | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Buffer height measuring gauge"900 TO1150mm,BGH-1 (0) Model" | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Buffer height measuring gauge"900 TO1150mm,BGH-01 Model" | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Buffer height measuring gauge"900 TO1150mm,BGH-01 Model" | — | — | — | 223.3 | |
| — | 1.00 | — | — | ||
| Alignment checking gauge (side bearer & Center Pivot) | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Alignment checking gauge(side bearer & Center Pivot)" | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| KNUCLE NOSE WEAR&STRETCH LIMIT GAUGE (APTA Gauge No-34100-2A) | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| NOGO GAUGE VERTICAL HEIGHT ALIGNING (APTA Gauge No-44250-5)NOGO:162 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| GO GAUGE VERTICAL HEIGHT ALIGNING (APTA Gauge No-34101-4)GO:177.99 mm | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| ALIGNING WING LIMIT GAUGE (APTA Gauge No-32600) | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| CONDEMNING LIMIT TIGHT LOCK COUPLERS (APTA Gauge No-34100-1)88.90.mm | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| CONTOUR MAINTENANCE GAUGE (KNUCLE PROFLIE GAUGE) APTA Gauge No-31000 | — | — | — | 134 | |
| — | 1.00 | — | — | ||
| "Gauge for draft key,Drg.:GA/SMY/02/1966,"135MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for straight link pin-D2(small), Drg.: GA/SMY/02/1966,"49MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for straight link pin-D1(Big), Drg.: GA/SMY/02/1966,"63MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for draw bar slot, Drg.:GA/SMY/02/1966,"40MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for screw rod thread-D(inner), Drg.: GA/SMY/02/1966,"50.285 | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for draw hook nose gap GO/NOGO, Drg:GA/SMY/02/1966," 46-53 MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for U shackle inner distance GO/NOGO, Drg: GA/SMY/02/1966,GO-77MM NOGO-85MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for trunion pin-D , Drg:GA/SMY/02/1966,"44MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw hook pin-D,Drg: GA/SMY/02/1966,"58MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for trunion -T , Drg:GA/SMY/02/1966,"72MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for U Shackle -D, Drg:GA/SMY/02/1966,"39MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for Screw rod thread -D,Drg: GA/SMY/02/1966,"54MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw bar shank -D,Drg: GA/SMY/02/1966,"36 MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for Draw hook slot, Drg:GA/SMY/02/1966,172MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw bar slot , Drg:GA/SMY/02/1966,"164MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw hook pin hole,Drg: GA/SMY/02/1966,"65MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for Draft key -T, Drg:GA/SMY/02/1966," 32MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for draft key, Drg.:GA/SMY/02/1966,"135MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for straight link pin-D2(small), Drg.: GA/SMY/02/1966," 49MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for straight link pin-D1 (Big), Drg.: GA/SMY/02/1966,63MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for draw bar slot, Drg.:GA/SMY/02/1966," 40MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for screw rod thread-D(inner), Drg.:GA/SMY/02/1966,"50.285 | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Gauge for draw hook nose gap GO/NOGO, Drg: GA/SMY/02/1966,GO 46 MM - NOGO 53MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Gauge for U shackle inner distance GO/NOGO, Drg: GA/SMY/02/1966,GO-77MM NOGO-85MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for trunion pin-D, Drg:GA/SMY/02/1966,"44MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw hook pin-D ,Drg: GA/SMY/02/1966,"58MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for trunion -T , Drg:GA/SMY/02/1966,"72MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for U Shackle -D, Drg:GA/SMY/02/1966," 39MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for Screw rod thread -D,Drg: GA/SMY/02/1966,"54MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw bar shank -D,Drg: GA/SMY/02/1966,"36MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw hook slot, Drg:GA/SMY/02/1966," 172MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw bar slot, Drg:GA/SMY/02/1966,"164MM | — | — | — | 212.1 | |
| — | 1.00 | — | — | ||
| "Gauge for Draw hook pin hole,Drg: GA/SMY/02/1966,"65MM | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| "Gauge for Draft key -T, Drg:GA/SMY/02/1966," 32MM | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Profile Gauge for Draw Hook root Contact with bent link Ref:DRG.: RDSO-SK-990070 to 15 mm | — | — | — | 122.8 | |
| — | 1.00 | — | — | ||
| Trunnion LH/RH Knuckle thread profile Gauge, REF DRG NO: RDSO-SK-99002"Size 55.635 x | — | — | — | 139.5 | |
| — | 1.00 | — | — | ||
| Air Plug Gauge- ICF RB Section Onsite calibration | — | — | — | 4,186.1 | |
| — | 1.00 | — | — | ||
| Air Plug Gauge- CTRB Section Onsite calibration | — | — | — | 4,186.1 | |
| — | 1.00 | — | — | ||
| Tensile Testing Machine 200T Pressure Sensor with indicator0-300 kg/cm2 | — | — | — | 4,688.4 | |
| — | 1.00 | — | — | ||
| Kinematic viscometer Bath (Digital) Globolytics instruments pvt ltd0-150 ° C | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Hot Air oven pyrometer make - Multi/Ion electricals 5-250 ° c | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Digital Clamp Meter0-750 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp Meter0-750 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge224.997 | — | — | — | 446.5 | |
| — | 1.00 | — | — | ||
| Go-No-Go Plug Gauge M20 x 2.5 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Go-No-Go Ring GaugeM20 x 2.5 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Go-No-Go Plug Gauge M8 x 1.25 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Go-No-Go Ring GaugeM8 x 1.25 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Go-No-Go Plug GaugeM8 x 1.25 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Go-No-Go Ring Gauge M8 x 1.25 Baker | — | — | — | 602.8 | |
| — | 1.00 | — | — | ||
| Digital Clamp Meter0-750 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Digital Clamp Meter0-750 V | — | — | — | 1,116.3 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge225.0023 mm | — | — | — | 446.5 | |
| — | 1.00 | — | — | ||
| Inside Micrometer 50-310 mm | — | — | — | 1,038.1 | |
| — | 1.00 | — | — | ||
| Plain Ring Gauge 80.0015 mm | — | — | — | 446.5 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge 0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Air Pressure Gauge0-10 kg/cm2 | — | — | — | 256.8 | |
| — | 1.00 | — | — | ||
| Inside Micrometer0-25 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer25-50 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer75-100 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer 100-125 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer125-150 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Inside Micrometer 50-75 mm | — | — | — | 279.1 | |
| — | 1.00 | — | — | ||
| Vernier Height Gauge0-250 mm | — | — | — | 379.5 | |
| — | 1.00 | — | — | ||
| Outside Micrometer 400-500 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Outside Micrometer300-400 mm | — | — | — | 881.9 | |
| — | 1.00 | — | — | ||
| Bore Gauge Indicator50-100 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Bore Gauge Indicator100-160 mm | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Bore Gauge Indicator2" - 6" | — | — | — | 558.1 | |
| — | 1.00 | — | — | ||
| Vernier Height Gauge0" - 14" | — | — | — | 535.8 | |
| — | 1.00 | — | — | ||
| Torque Wrench"3/4"" sq.drive200-815 NM" | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench"3/4"" sq.drive200-815 NM" | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench"3/4"" sq.drive200-815 NM" | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench"3/4"" sq.drive200-815 NM" | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench3/4" sq.drive 200-815 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 70-340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 10-68 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 10-68 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 10-68 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 10-68 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench1/2" sq.drive 10-68 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Steel ratchet type toque wrench10-70 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Steel ratchet type toque wrench475-1012 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Steel ratchet type toque wrench135-540 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Graduated scale for vernier/dial type calipers display calipers0-300 MM | — | — | — | 334.9 | |
| — | 1.00 | — | — | ||
| Graduated scale for vernier/dial type calipers display calipers0-150 MM | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Graduate scale for vernier caliper digital0-150 mm | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Graduated scale for vernier caliper digital0-150 MM | — | — | — | 167.4 | |
| — | 1.00 | — | — | ||
| Torque Wrench10 - 70 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench10 - 70 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench70 - 340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench70 - 340 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench70 - 330 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Torque Wrench70 - 330 NM | — | — | — | 837.2 | |
| — | 1.00 | — | — | ||
| Ultrasonic Thickness Gauge Measurement range 0.75 mm - 300 mm, Two point calibration accuracy +/- (0.5% Thickness +0.04mm) resolution - 0.1 mm, dual probe compatability 0.75 mm - 300 mm | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Ultrasonic Thickness Gauge Measurement range 0.75 mm - 300 mm, accuracy +/- (0.5% Thickness +0.04mm) Minimum resolution - 0.1 mm, dual probe compatability0.75 mm - 300 mm | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Electronic Weighning Scale100 g - 50 Kg | — | — | — | 1,674.4 | |
| — | 1.00 | — | — | ||
| Ultrsonic Thickness Measuring Gauge1.2-225 mm | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| Ultrsonic Thickness Measuring Gauge1.2-225 mm | — | — | — | 893 | |
| — | 1.00 | — | — | ||
| UNIVERSAL Testing Machine 200 KN | — | — | — | 3,907 | |
| — | 1.00 | — | — | ||
| LEICA Disto Laser Distance Meter 75 W Laser lightOnlite make | — | — | — | 1,339.5 | |
| — | 1.00 | — | — | ||
| LEICA Disto Laser Distance Meter 75 W Laser lightOnlite make | — | — | — | 1,339.5 | |
| — | 1.00 | — | — | ||
| Portable Digital Ultrasonic Flaw Detector S3271DXA (Make: EECI Digiscan-333)"Make: EECIDigiscan-333" | — | — | — | 9,693.8 | |
| — | 1.00 | — | — | ||
| screw coupling Size: GO-29.50mm & NO GO-25.0mm.Condemning gauge for Short shackle25.0mm GO-29.50mm & NO GO- | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| screw coupling Size: GO-29.50mm & NO GO-25.0mm.Condemning gauge for Short shackle25.0mm GO-29.50mm & NO GO | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| coupling Size: GO-45.0mm & NO GO@45'[email protected] gauge for Long shackle screw NO GO@45'46@50mm,GO-45.0mm | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| coupling Size: GO-45.0mm & NO GO@45'[email protected] gauge for Long shackle screw NO GO@45'46@50mm,GO-45.0mm | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Condemning gauge for checking the play between the hole short shackle & Trunion screw Pin condemning Size: 187.0mm .Size: 187.0mm | — | — | — | 489.33 | |
| — | 1.00 | — | — | ||
| Condemning gauge for checking the play between the hole short shackle & Trunion screw Pin condemning Size: 187.0mm .Size: 187.0mm | — | — | — | 489.33 | |
| — | 1.00 | — | — | ||
| Condemning gauge for checking the play between the hole Long shackle & Trunion nut Pi condemning Size: 278.0mm .Size: 278.0mm | — | — | — | 489.33 | |
| — | 1.00 | — | — | ||
| Condemning gauge for checking the play between the hole Long shackle & Trunion nut Pi condemning Size: 278.0mm .Size: 278.0mm | — | — | — | 489.33 | |
| — | 1.00 | — | — | ||
| Screw Pitch Gauge (GO & NO GO) (Knuckle Thread -LH) Size: R- 1.404mm & R- 1.625R- 1.404mm & R-1.625mm | — | — | — | 489.33 | |
| — | 1.00 | — | — | ||
| Screw Pitch Gauge (GO & NO GO) (Knuckle Thread -LH) Size: R- 1.404mm & R- 1.625R- 1.404mm & R-1.625mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Screw Pitch Gauge (GO & NO GO) (Knuckle Thread - RH) Size: R- 1.515mm & R- 1.625mm .R- 1.515mm & R- 1.625mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Screw Pitch Gauge (GO & NO GO) (Knuckle Thread - RH) Size: R- 1.515mm & R- 1.625mm .R- 1.515mm & R- 1.625mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Buffer plunger stroke127.0(+0/-3.0)mm | — | — | — | 566.03 | |
| — | 1.00 | — | — | ||
| Gauge for bogie bolster clearance 40.0 mm (+/-5) | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Buffer plunger stroke127.0(+0/-3.0)mm | — | — | — | 566 | |
| — | 1.00 | — | — | ||
| Gauge for bogie bolster clearance 40.0 mm (+/-5) | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM8 x 1.25-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM8 x 1.25-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM16 x 2-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM16 x 2-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM20 x 2.5-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug GaugeM20 x 2.5-6H | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge1-8 UNC 2B | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge1-8 UNC 2B | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge1.1/8-7 UNC 2B | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge1.1/8-7 UNC 2B | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM8 x 1.25-6g | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM8 x 1.25-6g | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM16 x 2-6g | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM16 x 2-6g | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM20 x 2.5-6g | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Ring GaugeM20 x 2.5-6g | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge1.1/8-7 UNC 2A | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge1.1/8-7 UNC 2A | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge1-8 UNC 2A | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge1-8 UNC 2A | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Wheel Diameter Gauge800-1100 mm | — | — | — | 643 | |
| — | 1.00 | — | — | ||
| Bluetooth Torque Wrench13-210 Nm | — | — | — | 1,256 | |
| — | 1.00 | — | — | ||
| Bluetooth Torque Wrench13-210 Nm | — | — | — | 1,256 | |
| — | 1.00 | — | — | ||
| Bluetooth Torque Wrench13-210 Nm | — | — | — | 1,256 | |
| — | 1.00 | — | — | ||
| Bluetooth Torque Wrench13-210 Nm | — | — | — | 1,256 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Dial Gauge0-10 mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Ultrasonic Thickness Gauge0-10 mm | — | — | — | 1,870 | |
| — | 1.00 | — | — | ||
| Outside Micrometer425-450 mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Outside Micrometer325-350 mm | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Plug gauge (GO & NO GO) for Traction centre (Fiat Bogie) to ICF Drg. No. J&T/G- 1002/01, Make: Dynamique | — | — | — | 3,864.13 | |
| — | 1.00 | — | — | ||
| Plug Gauge (GO & NO GO) for Traction Lever to ICF Drg. No. J&T/G-1004/01, Make: Dynamique | — | — | — | 3,864 | |
| — | 1.00 | — | — | ||
| Snap gauge (GO & NOGO) for Anti roll bar bracket (dia 80 h6) - Drg. No. J&T/G- 1007/01, Make: Dynamiquedia 80 h6 | — | — | — | 3,864 | |
| — | 1.00 | — | — | ||
| Snap gauge (GO & NOGO) for bearing seating (dia 60 M6) - Drg. No. J&T/G-1010/01, Make: Dynamiquedia 60 M6 | — | — | — | 3,864 | |
| — | 1.00 | — | — | ||
| Snap gauge (GO & NOGO) for bearing seating (dia 70 M6) - Drg. No. J&T/G-1011/01, Make: Dynamiquedia 70 M6 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Snap gauge (GO & NOGO) for Anti roll bar link (dia 115 H7) - Drg. No. J&T/G-1030/01, Make: Dynamiquedia 115 H7 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Snap Gauge (GO & NO GO) for Axle Box Pivot Bush to ICF Drawing No. J&T/G- 1038/01, Make: Dynamique | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge (M16 X 2mm pitch)M16 X 2mm pitch | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Digital Inside Micrometer, Make: Forbes225-250mm (without setting ring) | — | — | — | 1,563 | |
| — | 1.00 | — | — | ||
| Primary Rubber Pad Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25002 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Primary Rubber Pad Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25002 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Primary Rubber Pad Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25002 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Primary Metal Bump Stop Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25001 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Primary Metal Bump Stop Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25001 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Primary Metal Bump Stop Height Measurement Gauge, made of 5mm thick hardened steel, RDSO Drawing No. RDSO/CG/DRG/25001 | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge, class 6g, size M12X1.75, Make: BAKERM12X1.75 | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge, class 6g, size M16X2, Make: BAKERM16X2 | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge, class 6g, size M20X2.5, Make: BAKERM20X2.5 | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Ring Gauge, class 6g, size M24X3, Make: BAKERM24X3 | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge, class 6H, size M12X1.75, Make: BAKERM12X1.75 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge, class 6H, size M16X2, Make: BAKERM16X2 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge, class 6H, size M20X2.5, Make: BAKERM20X2.5 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Thread Plug Gauge, class 6H, size M24X3, Make: BAKERM24X3 | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| Electronic Torque Tester capacity 25-1100Nm, Suitable for ½" & 3/4" Sq. Drive display unit with connecting cable25-1100NM | — | — | — | 7,699 | |
| — | 1.00 | — | — | ||
| "PLUG GAUGE (GO & NO GO) for bush to ICF Drg. No. J&T/G-1036/01MAKE: SIMTRA" | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "PLUG GAUGE (GO & NO GO) for Roll link to ICF Drg. No. J&T/G-1006/01MAKE: SIMTRA | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "PLUG GAUGE (GO & NO GO) for Control Arm ( Dia 190) to ICF Drg. No. J&T/G- 1031/01MAKE: SIMTRA | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "FIXTURE for Traction Centre Assembly asper ICF Drg. No. J&T/F-0223/01 " | — | — | — | 1,256 | |
| — | 1.00 | — | — | ||
| "SNAP GAUGE (GO & NO GO) for Driving Rod (Dia 95) to ICF Drg. No. J&T/G-1037/01 MAKE: SIMTRA" | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "SNAP GAUGE (GO & NO GO) for Silent Block (Dia 145) to ICF Drg. No. J&T/G- 1032/01MAKE: SIMTRA" | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "SNAP GAUGE (GO & NO GO) for Bush (Dia 70) to ICF Drg. No. J&T/G-1035/01MAKE: SIMTRAQty=01Nos." | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "Parallelism checking Tool for Control Arm of LHB Coaches as per Drg. No. 2841050270 MAKE: Ganapathy IndustriesQty=01Nos." | — | — | — | 1,563 | |
| — | 1.00 | — | — | ||
| "Parallelism checking Tool for Control Arm of LHB Coaches as per Drg. No. 2841050270 MAKE: Ganapathy IndustriesQty=01Nos." | — | — | — | 1,563 | |
| — | 1.00 | — | — | ||
| "Snap Gauge (GO & NO GO) for Axle Box Pivot Bush to ICF Drawing No. J&T/G- 1038/01MAKE: Dynamique | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "Thread Plug Gauge "(M16 X 2mm pitch) | — | — | — | 413 | |
| — | 1.00 | — | — | ||
| "DIGITAL INSIDE MICROMETER MEASURING RANGE 225-250MM WITHOUT ANY SETTING RING MAKE:FORBES" | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| "PRIMARY RUBBER PAD HEIGHT MEASUREMENT THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25002" | — | — | — | 796 | |
| — | — | — | MADE | ||
| — | — | — | OF | ||
| — | 1.00 | — | — | ||
| "PRIMARY RUBBER PAD HEIGHT MEASUREMENT THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25002" | — | — | — | 796 | |
| — | — | — | MADE | ||
| — | — | — | OF | ||
| — | 1.00 | — | — | ||
| "PRIMARY RUBBER PAD HEIGHT MEASUREMENT THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25002" | — | — | — | 796 | |
| — | — | — | MADE | ||
| — | — | — | OF | ||
| — | 1.00 | — | — | ||
| "PRIMARY METAL BUMP STOP HEIGHT MEASUREMENT GAUGE MADE OF 5MM THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25001" | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| "PRIMARY METAL BUMP STOP HEIGHT MEASUREMENT GAUGE MADE OF 5MM THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25001" | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| "PRIMARY METAL BUMP STOP HEIGHT MEASUREMENT GAUGE MADE OF 5MM THICKHARDENED STEELRDSO DRAWINGNO RDSO/CG/DRG/25001" | — | — | — | 796 | |
| — | 1.00 | — | — | ||
| " I C F C O I L SPRING TESTING (ONSITE )" 30 T | — | — | — | 23,039 | |
| — | 1.00 | — | — | ||
| ALMEN GAUGE DIGITAL12.7-001 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| DIGITAL SURFACE PROFILE GAUGE 0-12 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| DIGITAL SURFACE PROFILE GAUGE0-12 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| SCREW PITCH (K-THREAD ) PROFILE GAUGE FOR SCREW SIZE 55 X 6.35 MM (WEAR LIMIT 1 MM)SIZE 55 X 6.35 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| " K THREAD PROFILE (PLUG TYPE-GO & NOGO) FOR K-THREAD TRUNNION- RIGHT SIDE(WEAR LIMIT 1 MM)""SIZE 55.635 X6.35 MM" | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| " K THREAD PROFILE (PLUG TYPE-GO & NOGO) FOR K-THREAD TRUNNION- LEFT SIDE(WEAR LIMIT 1 MM)""SIZE 55.635 X6.35 MM" | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| "K THREAD PROFILE RING GO-GAUGE FOR K-THREAD SCREW-RIGHT SIDE(WEAR LIMIT 1 MM)"SIZE 55 X 6.35 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| "K THREAD PROFILE RING NO GO-GAUGE FOR K- THREAD SCREW-RIGHT SIDE(WEAR LIMIT 1 MM)"SIZE 55 X 6.35 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| K THREAD PROFILE RING GO-GAUGE FOR K-THREAD SCREW-LEFT SIDE (WEAR LIMIT 1 MM)SIZE 55 X 6.35 MM | — | — | — | 489 | |
| — | 1.00 | — | — | ||
| " K THREAD PROFILE RING NO GO-GAUGE FOR K- THREAD SCREW-LEFT SIDE(WEAR LIMIT 1 MM)" | — | — | — | 3,097.13 | |
| — | 1.00 | — | — | ||
| DIGITAL GAUSS METERNIL | — | — | — | 3,097.13 | |
| — | 1.00 | — | — | ||
| RESIDUAL MAGNETIC FIELD INDICATORNIL | — | — | — | 3,097.13 | |
| — | 1.00 | — | — | ||
| RESIDUAL MAGNETIC FIELD INDICATORNIL | — | — | — | 2,330.13 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Advance_Correction_Slips_11_and_12_GCC_2022_merged.pdf Advance Correction Slip 11 and 12
ATTACHMENT
GCC-2022-uptoACS6.pdf
ATTACHMENT
IndianRailwaysStandardGeneralConditionsofContractApril-
ATTACHMENT
IndianRailwaysStandardGeneralConditionsofContractApril-
ATTACHMENT
Pt.IAdvanceCorrectionSlip_9ACS-9-
ATTACHMENT
2022AdvanceCorrectionSlipNo_10ACS-10-
ATTACHMENT
Tenderdoctoupload_3.pdf
ATTACHMENT
2024_09_25-IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_7ACS-71.pdf
ATTACHMENT
2024_12_20-IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_8ACS-8.pdf
ATTACHMENT
2025_01_09-2022-CE-I-CT-GCC-2022-POLICY-Pt.IAdvanceCorrectionSlip_9ACS-9-Regardingperformanceguarantee2.pdf
ATTACHMENT
2025_03_04-RBCE_CE-I-CTIRGCCApril-2022AdvanceCorrectionSlipNo_10ACS-10-Regardingarbitrationclause.pdf
ATTACHMENT
Advance_Correction_Slips_11_and_12_GCC_2022_merged.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .