Construction of Exclusive Women Market cum underground car parking at Jorhat under CIDF

Amount

Earth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Upto a depth of 2 mts. below the existing Ground Level. (a) In ordinary soil

Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered)(c) Above 3.00 m upto 4.50 m depth

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1)C) UNIFORM PILE (II) Concrete Grade M25 ) Pile dia 500 mm

Extra for using admixture & plasticiser M25 Pile dia 500 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement v) Pile Dia 500 mm

Empty boring for specified diameter piles from ground level to cut-off level. f) Pile Dia 500 mm

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (a) (A) TMT bar made of Primary producer (From Primary producer)

Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary.(c)with river sand or silt (predominantly non plastic) by truck caarriage including loading & unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(A) Brick on flat soling.

Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately)(a) In proportion- 1 cement : 3 sand : 6 coarse aggregates by volume

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (iii) 100mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.N) Without using admixture, plasticiser. c) M25 grade concrete

(B) In super structure from plinth level up to 1st floor level. i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. N) Without using admixture, plasticiser. c) M25 grade concrete

ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.N) Without using admixture, plasticiser. c) M25 grade concrete

FINS: iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band. N) Without using admixture, plasticiser.c) M25 grade concrete

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 2nd floor level.

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 3rd floor level.

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work: In Substructure upto Plinth Level :3.1.1.1 Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. ( ii ) Using 25mm thick plank

Sides of tie beams, plinth beams, grade beams etc. at or below plinth level. ( ii ) Using 25mm thick plank

In Superstructure from Plinth Level upto Floor Level-1: Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (I) In Sub-structure upto plinth level including dewatering if necessary

200mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed in structure (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (B) (b) In Super structure above plinth level upto 1st floor level

Extra over item no.4.3.3 (b) above for CC block work in each subsequent floor or part thereof above 1st floor level.

Extra over item no.4.3.3 (b) above for CC block work in each subsequent floor or part thereof above 2ND floor level.

Extra over item no.4.3.3 (b) above for CC block work in each subsequent floor or part thereof above 3RD floor level.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows, cupboard and other similar works wrought, framed and fixed in position in contact with C.C or Brick masonry walls including supplying, fitting and fixing with M.S flat holdfast (40mm x 3mm x 250mm) as per design and embedded in cement concrete blocks in prop 1 : 2 : 4 with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. ( a ) Sal wood

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) b) With 1st class local wood (Hollock / Gamari/Sundi/ Bonsum)(ii) 35 mm thick with panel inserts of 20mm thickness.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code for R.C.C work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs, spacers etc. complete.(b)TMT Bars (Fe 500). (i) TATA/SAIL. In Substructure & Superstructure upto Floor Level-1:

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above 2nd floor level.

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above 3rd floor level.

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Of size 600mmx600mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Of size 2400mmx1200mm and above

Providing polished granite tiles of approved quality, size and shape and thickness not less than 8mm, on walls over 15mm thick, cement mortar bed in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary, finished with flush pointing on wall with ordinary cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed.

18 mm thick marble stone tiles in flooring including risers and treads of steps, skirting, dado, walls, pillars laid with 10 mm thick base of cement plaster in prop.1:3 ( I cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels. (a) With 18mm thick marble stone tiles of size 600mm x 600 mm. (i) Dungri slab

Providing ITALIAN MARBLE floor of approved quality of specified size, shape and thickness , skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Of size 2400mmx1200mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.VITRIFIED TILES. (a) i)Normal range (Sizes 300 mm x 300mm and above) (Premium)

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (b) MULTIWYN TILES. Legato, Ribbera, Matrix, Esquire, Enigma, Flora, Little Flora, Nirvana, Purl, Contoura, Cobble, Canaletta, Nexus, Koral

Providing MOSAIC TILES of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side. b) In cement mortar 1:4

B) On fair side. b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. b) On two coat plaster

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (I) Thickness = 1.5 mm

Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coats) on new wood and wood based surfaces with enamel paint of approved brand and manufacture ( Asian paint/Berger paint/ICI paint/ J & N paint/Nerolac) to give an even shade including cleaning the surfaces of dirt, dust and other foreign materials sand papering and stopping. (i) Surfaces over 100mm in width / girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Applying primary coat over new steel and other metal surface over 100 mm in with or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel, would scrapers and sand paper. (a) With ready mixed "Red-Lead"/red oxide primer

Painting two coats (Excluding priming coats) on new steel and other metal surface with enamel paint of approved brand and manufacture to give an even shade including cleaning the surfaces of dirt, dust and other forein matters. i) Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish ) ( a ) Sliding door bolts. ( i ) 300 mm x 16 mm

( ii ) ( b ) Tower Bolt. 250 mm x 12 mm

( ii) ( c ) Door Handle .100 mm

(t) d) Eye and hook (300mm)

(m) Mortice lock Vertical type 75mm (Godrej with handle-4 lever)

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass. (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (ii) 4-Panel with 5mm clear float glass

Supplying and installing uPVC- sliding door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.8mm with corners fusion welded, fully reinforced with Galvanized steel 2mm including interlock profile, glazing bead, grooving bead, brush seal, locking arrangement, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. (I) 2 Track Sliding door with Flyscreen using uPVC section of size 88mm x 50mm x 2.8mm thick wall for frame, 37mm x 75mm x 2.8mm thick wall for glass sash, 25mm x 49mm x 2.8mm thick wall for flyscreen sash, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (a) 2-Panel. i) Using 5mm clear glass

Supplying and installing uPVC- Fixed Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent. With 5mm clear glass (a) Fixed window using uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Providing and fixing plain with special metal, sachputty and glazing clip in steel window / doors / cleastory windows including necessary cutting to required sized for all floors. (v). 5.00mm thick.

Providing, fitting and fixing M.S.Grill of required pattern for windows/clerestory windows/ opening with M.S.Flats at required spacing in frane all round,square or round M.S.Bars with round headed bolts and nuts or screws. I . Plain grill. (c) Fixed to Brickwork/P.C.C/R.C.C.

Providing and fixing Stainless steel (Grade 304) railing made of Hollow tubes, channels, plates, etc. including welding , grinding buffing, polishing and making curvature, (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i.e. fixing the railing with necessary accesories & stainless steelm dash fasteners , stainless steel bolts etc. of required size, on top of the floor or the side of waist slab with suitable arrangement as per the approval of Engineer in-charge .(For payment, only weight of stainless steel member is to be considered . No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered. (a) SS Railing Steel with Wire Locator.

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). 12.5mm thick

Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.60 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (iv) 0.60 mm thick

Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. (B) Using RHEOMIX 131 OF BASF

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

24- hours use Building: Providing & Laying of Insuboard, thickness 75 mm of density 32 kgs/m3) over the RCC ceiling (Plastered Surface) from inside. The insuboard will be fixed over the wall surface by the PVC Fastner(side lap) ( Make: M/s Supreme or equivalent)

Thermal Insulation system of external wall with insuboard and cement plaster finish.. Providing & laying of insuboard of thickness 50mm of density 32kgs/m3) over the Brick+ plaster(Plastered surface from outside. The insuboard will be fixed over the wall surface by PVC Fastner(1250X 600MM) shiplap/Sqr Edge profile and the insuboard joints will be sealed with self glass fibre adhesive.

Providing and fixing of wall cladding stones along the walls made of concrete & other recycled materialswith high compressive strength around 22.5 N/Sq.mm and abrasion resistant, exterior grade applied with polymer based adhesive with good adhesion strength and fast curing. Traveertine stone with dimensions 19.25" x 19.25" (LXH), THICKNESS 25MM AND WEIGHT 2.90 KG/SQ.FT. TO BE APPLIED WITH THE ADHESIVE APPLIED AS A UNIFORM SCRATCH COAT FIRST AND INDIVIDUAL PIECES OVER IT. tHE PROTECTIVE TRANSPERANT SEALER COAT TO BE DONE OVERALL WITH THE HELP OF A BRUSH in the final stage for a maintenance free cladding altogether . Fixing and cutting of the stones to be done as per the drawings , specifications and instructions of the Engineer in charge. i) Vegas Stone (Mocha)

Providing and fixing of wall cladding stones along the walls made of concrete & other recycled materialswith high compressive strength around 22.5 N/Sq.mm and abrasion resistant, exterior grade applied with polymer based adhesive with good adhesion strength and fast curing. Traveertine stone with dimensions 19.25" x 19.25" (LXH), THICKNESS 25MM AND WEIGHT 2.90 KG/SQ.FT. TO BE APPLIED WITH THE ADHESIVE APPLIED AS A UNIFORM SCRATCH COAT FIRST AND INDIVIDUAL PIECES OVER IT. tHE PROTECTIVE TRANSPERANT SEALER COAT TO BE DONE OVERALL WITH THE HELP OF A BRUSH in the final stage for a maintenance free cladding altogether . Fixing and cutting of the stones to be done as per the drawings , specifications and instructions of the Engineer in charge.ii)Chisel Stone

Providing and fixing of wall cladding stones along the walls made of concrete & other recycled materialswith high compressive strength around 22.5 N/Sq.mm and abrasion resistant, exterior grade applied with polymer based adhesive with good adhesion strength and fast curing. Traveertine stone with dimensions 19.25" x 19.25" (LXH), THICKNESS 25MM AND WEIGHT 2.90 KG/SQ.FT. TO BE APPLIED WITH THE ADHESIVE APPLIED AS A UNIFORM SCRATCH COAT FIRST AND INDIVIDUAL PIECES OVER IT. tHE PROTECTIVE TRANSPERANT SEALER COAT TO BE DONE OVERALL WITH THE HELP OF A BRUSH in the final stage for a maintenance free cladding altogether . Fixing and cutting of the stones to be done as per the drawings , specifications and instructions of the Engineer in charge. iii)Waterfall Stone

Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.) b) from Government land

c) Extra lead beyond initial lead of 3.00km

Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (b)Using Grading II material

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete a) TMT Bar b) ISI approved - M.S. Rod

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., and removal of the same for in-situ reinforced concrete and plain concrete work in R.C.C. approach road. (a) Using 38mm thick plank

Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compacted and finished in a continuous operation including provision of construction and expansion joints, plasticiser and curing compound of Fosroc/ Sika/ Choksey/ Degusa and hardener of Recron/ Degusa/ Fosroc; finishing to lines and grades and curing as specified and directed complete (form work and reinforcement shall be measured and paid separately). (b) M 25 Grade Concrete

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) ii) Hindware make a) White (i) Wall mounted Closet Alexa (inclusive of seat cover and fittings) (Cat. No. 92032)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (B) Hindware Make (i) Concealed Cistern 83mm with Prime flush plate 83mm

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Table Top Basin (B) Hindware Make (a) White (iii) Crest 670 x 460 (Cat. No.91022)

(ii) Soap dish pears (Cat.No.TR-0662) / Soap dish square (Cat.No.TR-0663)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (iii) Queen's (Cat.No.AQN-7721)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (c) Cera make 1.32.1 (i) Waste coupling (full thread) 40 mm (cat.No.CA 103)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (c) Cera make (i) Bottle trap 150 mm (6”) (Cat.No.104)

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Jaquare make (a)Continental /Clarion & Crabtree Frattini brand ( For V.I.P. use) (C.P.) i) C.P. bibcock with wall flange

ii) C.P. Bibcock long body with flange Cat. No.7014

ii) C.P. 2-way bibcock double handle with flange Cat No.21017

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (iii) 25mm dia

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. SONA make (b) Heavy type (a) Pillar cock

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (i) Glister Jumbo (Bowl Size - 610 x 460 x 254) Glossy

Providing fitting & fixing white vitreous glazed drain board of Hindware make Size (530x450) of Hindware (Cat.No.51001) including painting of brackests complete. Size (530x450) of Hindware (Cat.No.51001)

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (e) Hotelier (Cat. No.AHS-1531)

(i) Jaquar Make Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (i) Jaquar Make (b) Continental (Cat.No.ACN-1137N) (with mettalic bottle)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (iv) Kubix towel ring square (Cat.No.AKB-35721)

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make a) White (i) White (Cat. No. C0503)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (Soil + Waste + Rain Water) a) In exposed surfaces or in trenches. (ii) 75mm dia.

(ii) 110mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

(iv) 75mm dia.

(vi) 50mm dia

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make

(i) 160mm dia. PVC cowel of ISI make

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

(b) 75mm dia

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) exposed on wall & Terrace (FOR DOMESTIC & FLUSHING WATER) (b) 20 mm OD

(c) 25 mm OD

(d) 32 mm OD

(e) 40 mm OD

(f) 50 mm OD

(g) 65 mm OD

(ii) Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to damages (FOR DOMESTIC & FLUSHING WATER) (a) 15 mm OD

(b) 20 mm OD

(c) 25 mm OD

(d)32 mm OD

(e) 40 mm OD

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings FOR EXTERNAL USE (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 32 mm (OD) diameter

v) 40 mm (OD) diameter

vi) 50mm (OD) diameter

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. a) 50mm dia

b) 40 mm dia.

c) 25 mm dia.

Supplying and fitting ball valve as specified and directed.. a) 25 mm dia. (gun metal)

Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. a) 50 mm dia (Heavy type)

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a) Sintex make

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. (a) 2000 litre capacity

Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed. (a) 2000 litre capacity

Attached growth aerobic Sewage treatment System with FRP treatment chamber with all components including Tertiary filtration system and clorine dosing system to achieve treated water quality suitable for reuse or discharge as per CPCB norms.

Labour for sinking tube well with 40mm (internal) dia G.I. Pipes up to having strata, having potable water including fitting and fixing strainer hand pump and other accessories as directed complete as in any soil.

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. vi) Bore hole of 200mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. vi) 150mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. iv) 50mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. ii) 50mm diameter

Supplying fitting and fixing check valve (non return valve) including thread to pipes. iv) 50mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe (Cat.I)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Non Sor 150 x 100 mm size P type Non Sor

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885

Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 300 x 300 mm

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :As per DSR - 2016 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : As per DSR - 2016 Item No :- 19.29 Page No :- 361 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

For Drainage 150 mm dia. R.C.C. pipe

200 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : For Storm Water 150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

Construction of Percolation well as per below detail: (a) Making of 12" size bore in ground by machine at the site shown up to 200 ft with or up to water level all development and testing the same for specified percolation rate etc comp as directed & as per detail specifications. (b)Providing and lowering 6" Dia PVC ISI marked Heavy duty stainer pipe plain or slotted 6 kg/cm sq capacity in bore as directed & as per detail specification incl.all taxes etc comp as direction. (c)Gravel packing of suitable size from bottom of bore to ground level as directed as per detail specification. (d)Mud pit arrangement if necessary etc comp as direction. (e)Mud pit arrangement if necessary etc comp as direction. (f)Mud pit arrangement if necessary etc comp as direction. (g)Mud pit arrangement if necessary etc comp as direction. (h)Mud pit arrangement if necessary etc comp as direction. (i)Air compressor work making top line arrangement. (j)Providing, Supplying, laying and lowering and jointing ISI mark 6" Dia rigid unplasticised standard length 6 kg/cm sq PVC pipe suitable for portable water with including all taxes with jointing material etc comp as dire and detail specifications. (k)Carting of surplus earth lime, murrum, building rubbish earth manure or sludge and exacavated rock and fly ash etc. up to 5 km lead incl. Loading & unloading the same.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring to 5 Aa pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point up to 3.00 metre. length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Wiring for multi control light point limiting to 100W with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for multi control light point limiting to 200W with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 15/16 Amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete Long point up to 10.00 metre. Length.

Wiring for twin control light point with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.

Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 1-2 module type Metal

3 module type Metal

4-5 module type Metal

6-8 module type Metal

10 module type Metal

12-16 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 1 module

2 module

3 module

4 module

5 module

6 module

8 module

10 module

16 module

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department.

Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying installation, testing and commissioning of 8 passenger (544 Kg.)/ lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type Passenger Elevator 3. Capacity Passenger -8 Persons - 544 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Type of Drive Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control. 6. Location of Machine Room Top 7. Available Travel 11 Metres. ()maximum) 8. Serving Ground Floor to 3rd Floor 4 Stops 4 Levels 4 Openings 9. Well Size (Required) 1850 mm Wide x 1850 Deep over the finished surface 10. Power Supply 415 V three-phase 50 cycles AC 11. Auxiliary Required Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside 1300 mm Wide x 1100 mm Deep approx. 13. Required Pit Depth 1600 mm ()mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure painted Steel Car - Lx3 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Centre opening stainless steel power door with vision panel 21. Landing Entrance Centre opening stainless steel power door with vision panel 22. Clear Opening 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings Direction & Position Indicator 24. Other Features Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic Switch. Fire drive. 2 Intercom System Full length Infra-red Door Safety. Auto Rescue Device.

Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way SPN double door

6 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 6 way TPN (4+18) double door

8 way TPN (4+24) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

C Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 25A

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make) [ F ]

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Heavy Duty 450 mm sweep 900 RPM Single phase (ORIENT make) [EFH ]

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

95.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

150.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

4 Core A2XWY A2XFY 4.00 Sq. mm.4 Core armoured U.G. cable

6.00 Sq. mm.4 Core armoured U.G. cable

10.00 Sq. mm.4 Core armoured U.G. cable

16.00 Sq. mm.4 Core armoured U.G. cable

25.00 Sq. mm.4 Core armoured U.G. cable

Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid through medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) / partially in air as required for connection as directed, including excavation of trench, refilling reconstruction of damaged done to road, drain, wall et as specified by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 240sq mm 3 Core armoured 11 KV ( H.T. U.G. cable laid through 150mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1"

SINGLE compression BRASS GLAND HEAVY DUTY 1-1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2"

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 101

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Bend 101

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Tee 101

Supply, Installation, Testing and Commissioning of APFC Panel As per Single Line Diagram Dwg No. AMC-E-SLD-02

Supply, Installation, Testing and Commissioning of Floor LT Panel 1 @ Ground Floor As per Single Line Diagram Dwg No. AMC-E-SLD-03

Supply, Installation, Testing and Commissioning of Floor LT Panel 2 @ First Floor As per Single Line Diagram Dwg No. AMC-E-SLD-04

Supply, Installation, Testing and Commissioning of Floor LT Panel 3 @ Second Floor As per Single Line Diagram Dwg No. AMC-E-SLD-05

Supply, Installation, Testing and Commissioning of Floor LT Panel 4 @ Third Floor As per Single Line Diagram Dwg No. AMC-E-SLD-06

Supply, Installation, Testing and Commissioning of HVAC Panel As per Single Line Diagram Dwg No. AMC-E-SLD-07

Supply, Installation, Testing and Commissioning of Raw Power Panel As per Single Line Diagram Dwg No. AMC-E-SLD-08

Supply, Installation, Testing and Commissioning of Utility Panel As per Single Line Diagram Dwg No. AMC-E-SLD-09

Supply, Installation, Testing and Commissioning of Common Lighting Panel As per Single Line Diagram Dwg No. AMC-E-SLD-07

Supplying, installation, testing and Commission of LED based 4ft. Surface Mounted Luminaire with a nominal system lumen output of 2000 lumens and a minimum system efficacy ≥ 110 lm/W. The luminaire has IP20 Rating with PF>0.95, CCT of 6500K, THD 15% and an operating Voltage Range of 150 - 275 V. The luminare housing is made of polycarbonated co extrusion tube for LED housing and engg plastic end caps. The total power consumption does not exceed 18 W (including driver). LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/ Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply. (Approved Make : Bajaj / Philips / Shreder ) BAJAJ BCLSB 18W LED I. Fixtures should be with all necessary fixing accesories.

Supplying, installation, testing and Commission of LED Recess mounted 12W Round Non Integral Downlighter with a nominal system lumen output of 1020 lumens and system efficacy ≥ 85 lm/W. The luminaire has color temperature of 5700K(WH), 4000K(NW), 3000K(WW) and CRI >80. The luminaire meets IP20 rating with THD<15% and PF > 0.95. The luminaire is made of specially manufactured engineering plastic housing and frame with Flat Opal diffuser. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply.( Approved Make : Bajaj / Philips / Shreder ) BAJAJ BPSLR 12W LED WH. Fixtures should be with all necessary fixing accesories.

Supplying, installation, testing and Commission of LED Recess mounted 18W Round Non Integral Downlighter with a nominal system lumen output of 1450 lumens and system efficacy ≥ 85 lm/W. The luminaire has color temperature of 5700K (WH), 4000K(NW), 3000K(WW) and CRI >80. The luminaire meets IP20 rating with THD<15% and PF > 0.95. The luminaire is made of specially manufactured engineering plastic housing and frame with flat Opal diffuser. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply. ( Approved Make : Bajaj / Philips / Shreder ) BAJAJ BPSLR 18W LED WH.. Fixtures should be with all necessary fixing accesories.

Supplying, installation, testing and Commission of LED Recessed LED 600x600mm luminaire with 24W system wattage made of CRCA steel sheet with opal acrylic Diffuser fixed in separate steel frame. System luminaire efficacy > 130 lum/W with system lumen output of >3050 umens. CCT of 5700K (WH) and 4000K(NW) are available. CRI >80, PF >0.95, an operating Voltage Range of 150 to 265 V. Internal Surge Protection 2.5KV. ATHD < 10% and IP20 protected. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply. ( Approved Make : Bajaj / Philips / Shreder ) BAJAJ BZRSQL 24W LED XEi

Supplying, installation, testing and Commission of LED LED 80W highbay luminaire made of Powder coated High Pressure Die Cast Aluminium housing and discrete SMD LEDs delivering above 7700 system lumens and system efficacy 100±5%. LED fixed on die cast aluminium heat sink with FV Technology for better Thermal management - Increases product Life. Voltage range 140-280V AC. Correlated Color Temp 5700K, CRI>70, Maintenance of lumen L70 (Hrs) 50K@L70. Protections : IP65 ,IK07. 4 stage Protection of Over + Under Voltage, Short Circuit, Reverse Polarity & Over Temp. Power factor >0.95,THD< 15% . Internal surge protection of 5KVand external surge protection of 10KV. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul ( Approved Make : Bajaj / Philips / Shreder ) BAJAJ BGHB 80W LED GV

Supplying, installation, testing and Commission of High performance presence detectors with dual circuit control. The Dimmin channel cab ne used to control light output of luminaires. The photocell measures available natural daylight and maintains uniform lux level. The switching channel can be used t swith On/Off separate channel of standard non diming luminaires. As per Bajaj Make PIR Sensor Code No. 112620 or Eui.. Fixtures should be with all necessary fixing accesories.

Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade

SITC of Automated Escalator enabled with Brail and Audio Assistance

Supply,Install,Testing And commissioning of 1.3 Megapixel (1280H x 960V) sensor and 18x optical zoom lens, theCALIPSD-1AI18WW/WP delivers 720P high resolution image at 25fps real time. Featuring True Day / Night with IR-cut filter and built-in IR led, the camera can automatically switch to black and white in pitch black conditions and also gives an IR beam distance of up to 100 meters, providing superior images at both day and night time. Equipped with IP 66 weatherproof, 4000V lightning protection and anti-surge protection housing,UL listed

Supply,Install,Testing And commissioning of Fixed Bullet1080p 25/30 fps image with a 1/2.7" 4megapixel sensor or full HD 4 MP 20 fps image with a 1/3" 4 megapixel sensor Wide Dynamic Range, up to 120 dB, ensures glare-free images True Day/Night provides vivid color images by day and clear black-and-white images at night with ICR Excellent low-light performance with 3D noise reduction, saving storage and bandwidth,UL listed

Supply,Install,Testing And commissioning of Fixed Bullet1080p 25/30 fps image with a 1/2.7" 2 megapixel sensor1/3" 2 megapixel sensor Wide Dynamic Range, ensures glare-free images True Day/Night provides vivid color images by day and clear black-and-white images at night with ICR Excellent low-light performance with 3D noise reduction, saving storage and bandwidth,UL listed

Supply,Install,Testing And commissioning of Fixed Dom 1/2.7" 2 MP or 1/3" 2 MP progressive scan imager 3.6 mm or 2.8 mm fixed lens, True day/night (IR-cut filter), Wide dynamic range up to 120 dB, Low-light performance down to 0.01 lux (color) or 0 lux with IR LEDs on,Up to 130 ft (40 m) IR illumination, depending on scene reflectance, H.264 Main Profile compression ,Triple stream support Supports up to 20 connections,Weatherproof housing with IP66 ingress protection rating,UL listed

Supply,Install,Testing And commissioning of 24CH NVR, 8 SATA HDD Slot (Max 32TB), ATX Power,Realtime Recording Resolution (32 Channels @ 720P,24 Channels @1080P),Realtime Local Playback( 8 Channels @ 720P,4 Channels @1080P),Multiplex Operation,H.264 High profile,BNC/VGA/HDMI output, main profile, baseline,HDD Redundancy,Free DDNS,Network backup, USB HDD, USB writer, SATA writer,1 RS485, support 18 kinds of PTZ protocols,ONVIF 2.0,1 channel Audio Input and Output,16 Ch Alarm Input and 8 Ch Alarm Output

Supply,Install,Testing And commissioning of 6TB Survallance Hard Drive, Supportable 24X7

Supply,Install,Testing And commissioning of 24Port Gigabit switching becomes more cost-effective with 190W Power-over-Ethernet budget and 2 SFP ports for wireless converged networks, IP surveillance and mobility

Supply,Install,Testing And commissioning of 8 Gigabit switching becomes more cost-effective with 190W Power-over-Ethernet budget and 2 SFP ports for wireless converged networks, IP surveillance and mobility

Supply and installation of 9 U Equipment steel rack wall mounting for installing Microphone receiver, amplifier etc, rack should be fully enclosed steel housing fabricating with 14 SWG, Sheet and powder coated with glass doors and having wire nos. wire management system ,the rate includes the exhaust fan 1 nos, 4 Sockets and 1 switch power strip and all the wiring,in the rack.

Supply,Install,Testing And commissioning of Diagonal Screen Size-55” or higher, Panel Type-LED,Resolution-1920 x 1080 or higher,Brightness-300 nit or better,Contrast Ratio-1000:1 or higher,Input & Output-PC input (D‐sub)‐1/HDMI‐1, Audio in, USB,Accessories-Power cable, VGA Cable, HDMI Cable (Please mention the length of the cables)., Wall mount kit, Quick Setup Guide, Warranty Card, Application CD, Remote Control with Batteries

Supply,Install,Testing And commissioning of Cat 6 Cable With Labour And Pipe (ISI)

Supply, Installation, Testing and Commissioning 5000 lumens projector, 1- Chip DLP with HD resolution

Supply, Installation, Testing and Commissioning Motorized 133" Diagonal Matt White Screen with IR Remote Control, Aspect ratio : 16 : 9

Professional Grade Integrated E Podium - Includes following --> 22 inch Touch tablet with Electronic hydraulic facility x 1 no --> DSP for professional grade echo cancellation --> 300 Watt Amplifierx1no --> W/L Lapel Mic for Teacherx1no --> W/L Handheld Mic for Studentx1no --> Wired Gooseneck mic on Podium/desk x1no --> Interface on podium for HDMI+VGA+USB+POWER +LAN Etcx1no --> Inbuilt Rack with lock and key for equipment installation and safetyx1no --> Central Controller all ine one Device for HD Switcihng , control ,relay etc supplied with 7 inch touch based panel --> Podium to be made from high quality metal and MDF material with provision of keeping laptop on it.

Professional Grade IP Rated wall mount Speaker

Cables & Connectors Lot

10 Meters Active USB 2.0 Cable.

15 Meters HDMI 2.0 Cable.

10 Meters Power Cable for Motorised Screen.

Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required. (MAKE: NIRMAL RUBBER/NEWAGE)

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) a) 900X600X450

Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 02 way

Providing & fixing of Gun Metal fire Brigade connection (withdrawl connecting head) consisting of 63mm instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 2 way

Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)

Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

Providing ,Fixing ,Testing & Commissioning of air Release Valve a) 25 mm dia

b) 50 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) a) 200 mm dia

b) 150 mm dia

c) 100 mm dia

d) 80 mm dia

e) 65 mm dia

f) 50 mm dia

g) 40 mm dia

h) 32 mm dia

i) 25 mm dia

j) 20 mm dia

k) 15 mm dia

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (a) 150 mm dia

(b) 100 mm dia

(c) 80 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (A) 200 mm dia

(b) 150 mm dia

(c) 100 mm dia

(d) 80 mm dia

(e) 65 mm dia

(f) 50 mm dia

(g) 40 mm dia

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (a) 50 mm dia

Providing, Erection, Testing & Commissioning of Cast Iron Sluice Valve/ Gate Valve confirming to IS:14846/2000 complete with matching flanges, rubber insertion, nuts, bolts and washer etc of following size complete as required (MAKE:KOLEY/KALPANA/AUDCO) (b) 150 mm dia

(c) 100 mm dia

(d) 80 mm dia

Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required (b) 150 mm dia

Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)

Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved) (Make : HD Fire / TYCO)

Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved) (Make : HD FIRE )

Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd. (a) 400 mm dia

(b) 300 mm dia

Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(9 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of ABC stored Pressure Fire Extinguisher with built – In Pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle as per IS:13849 with ISI mark. (10 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Testing and Commissioning of Electric driven Hydran pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement.

Supply, Installation, Testing and Commissioning of Electric driven Sprinkler pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement.

Supply, Installation, Testing and Commissioning of Diesel Engine driven fire pump (Standby Pump) suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards. b) Diesel Engine with suitable HP with synchronous speed 3000 RPM, with all required accessories. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement.

Providing, Fixing, Testing and Commissioning of Electric driven pressurization pump (Working) suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal Type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 m.head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete installation of pump set. d) Suitable cement concrete foundation duly plastered with anti vibration pads.

VARIABLE REFRIGERANT FLOW (VRF / VRV) TYPE AIR CONDITIONING SYSTEM Supply,Installation,testing and commissioning of Air Cooled Variable Refrigerant Volume/Flow System for R410A suitable for 415 ± 10%,50 Hz,AC supply. The unit shall consist of indoor units and external condensing units and other accessories as listed below complete in all respects.The Quantities provided here are based on conceptual design and there may be variation during detail design. 1.1.1 INDOOR UNIT FOR VRF SYSTEM Including indoor unit, remote control, indoor panel board, Drain Pump, electrical wiring between indoor unit & the respective power supply point, all controls, RA filters, etc. 16.0 TR Ductable Ceiling Mounted Split Air Conditioner with Corded Remote

11.0 TR Ductable Ceiling Mounted Split Air Conditioner with Corded Remote

5.5.0 TR Ductable Ceiling Mounted Split Air Conditioner with Corded Remote

OUTDOOR UNITS FOR VRF SYSTEM ODU TR should be equal to or higher than the specified load after allowing for de-rating due to ambient & piping length All outdoor equipmant shall be capable of operating up to 44 DegC ambient temperature. Supply Installation, testing and commissioning of Full Inverter type Modulating outdoor units, with multi scroll/INverter Rotary compressors (minimum two compressors per ODU) with preferably all capacity controlling compressors, special pre-coated fins, panel, corrosion resistant coated condenser, inverter based condenser fan, Additional charge of refrigerant R-410a, M.S. hot dip galvanised stands / supports, electrical & microprocessor panel with isolator switch with protection IP55 near each ODU,, isolating valves and all the necessary accessories for proper functioning of the units, having following approximate capacities UNit should match IGBC requirement as perr their guidelines Circuit-1,2 &3 Estimated 32 TR IDU 36 HP VRF ODU

Circuit-4 Estimated 16 TR IDU 18 HP VRF ODU

Circuit-5 Estimated 28 TR IDU 32 HP VRF ODU

INSULATED REFRIGERANT PIPES, FITTINGS, Y-JOINTS, ELECTRICAL WIRING, ETC Set of refrigerant pipes, pipe fittings,ref-joints/Y-joints, splitters, GI angles/flats supports, accessories, electrical Control/ Power wiring between indoor & outdoor units, Additional Refrigerant GAS charging 19mm/25mm nitrile rubber insulation for entire piping system including UV Protection/UV Coating with glass cloth material (Starbond30/36) for exposed pipes as per Technical Specifications. Refrigerant piping on terrace shall be installed on GI pipe tray, and finally covered with GI sheet cover for protection. Rates should include the same For Circuit-1,2 & 3

For Circuit-4

For Circuit-5

CONDENSING UNIT STANDS FOR VRF ODU Hot-dip galvanized platform type MS stands of adequate weight-bearing capacity, of min. 200mm height from finished floor level, or higher as per site condition. Rates to include double rubber pads & galvanised MS plate for each leg.

DUCTING FOR AIR CONDITIONING GI, air-tight ducting & plenums fabricated out of prime quality sheets. Complete with necessary supports, expansion fasteners, etc. (ALL DUCTING SHOULD COMPLY WITH BIS CODE) 24 Gauge (0.63mm) for duct sizes up to 750mm

22 Gauge (0.80mm) for duct sizes between 751 and 1500mm

20 Gauge (1.0mm) for duct sizes between 1500 and 2250mm

DUCTING ACCESSORIES Opposed blade type manually operated GI duct dampers

Fusible link type fire dampers in SA ducts, with auxiliary switch/contactor, control wiring & interlocking for switching OFF the respective AHU in case of fire. Fire dampers shall be approved by TAC & FIA and also as per UL 555 specifications including temperature/time rating.

Fresh air assemblies comprising of SS bird screen, rain louvers & opposed-blade type fresh air damper; fixed on the wall surface with wooden frames

Double canvass connection at outlet of each DSAC/HAT/OA unit. Provide zipper to facilitate temperature measurement (for DSACs/OA Units only) Rate per Machines not per Outlet

GRILLES & DIFFUSERS Powder coated, extruded Aluminium SA/RA Grilles/Diffusers: NOTES: 1. The colour shade & finish of all grilles & diffusers shall be as approved by the Architect/Interior Designer. 2. SA grilles shall be with adjustable vertical & horizontal deflection louvers where required. SA/RA Grilles without Aluminium Volume Control Damper(VCD)

SA/RA Diffusers without Aluminium VCD

Opposed blade type Aluminium volume control damper for SA collars

THERMAL INSULATION FOR SA & RA DUCTING 19 mm thick Armacell/K-Flex/A-Flex Class O closed-cell Elastomaric Nitrile rubber insulation of 40-60 kg/cumt density for SA ducting (except acoustically lined ducts). Pre-clean duct surface before applying insulation. Stick insulation material using a thin film of manufacturer-recommended adhesive on both duct and insulation; keeping the insulation material under compression (without any stretching). Seal all joints air-tight. Thickness mentioned is minimum thickness.

13mm Nitrile Rubber insulation for SA collars/droppers (Armacell/K-flex/A-Flex Class O Equivalent)

DUCT ACOUSTIC LINING Acoustic lining for min 8mtr ducting from each DSAC unit with 25mm thick resin bonded fibreglass rigid boards having 48 kg/cum density, fixed with GI nut- bolts & washers and covered with RP tissue paper & perforated Aluminium sheet

CONDENSATE DRAIN PIPING 25mm dia UPVC drain piping (with 8mm rubber Insulation) from each HAT/DSAC/OA/WM Split/Cassette units to drain point/header

40mm dia UPVC drain piping (with 8mm rubber Insulation) drain header to the respective drain point

ELECTRICALS Cabling Armoured Copper power & control cabling (incl. terminations) for Common Panel to condensing units controls/cutouts, fire dampers, etc. All cables/wiring shall be FRLS.

Earthing GI double earthing for A/C equipments & controls

TPN DISTRIBUTION BOARD FOR ODU POWER SUPPLY IP-55 Weather-proof TPN DB/Splitter Board suitable for outdoor installation with 1 no. incoming feeder supplied from from electrical DB & nos. of outgoing feeders as required for each ODU. Incoming feeder shall be sized for Aluminium cable, with MCB/MCCB & indicating lamps. Outgoing feedres shall be with MCB of required rating. No. of outgoing feeders shall be as required for the respctive VRF ODU

IGBC Registration, Certification, Consulting & Commissioning Fee

LEED USGBC Registration, Certification, Consulting & Commisioning Fee

Cost of Mechanical Multi-Level Car Parking System

Wireless POS V5(Offline) Version 2-Automatic Entry

O.P.GARODIA