REPAR REPLACEMENT AND MAINT OF CI DI GI PIPE LINES VALVE CHAMBERS AND CONNECTED EORKS INCL CLEANING OF OVER HEAD RESERVOIR AND UG SUMP IN AREA UNDER INSP ORGN UNDER GE MH AND RH KIRKEE

Amount

Excavation in trenches not exceeding 1.5 m in wide and not exceeding 1.5 m in depth and getting out in Soft /loose soil.

All as per item No 1 above but in hard / dense soil

Returning /refilling including spreading,leveling,watering and well ramming in layers not exceeding 25 cm in soil.

Removing excavated material to a distance and deposting wehere directed at a level not exc 1.5 meter above the starting point in soil

Taking out 15 mm dia. GI/ERW tubing and connections and storing in safe custody for refixing / store all as specified & directed.

All as per item No 5 above but 20 mm dia pipe.

All as per item No 5 above but 25 mm dia pipe.

All as per item No 5 above but 40 mm dia pipe.

All as per item No 5 above but 50/65 mm dia pipe.

All as per item No 5 above but 80/100 mm dia pipe.

All as per item No 5 above but 150/200 mm dia pipe.

Refixing only 15 mm dia. GI piping including provision of new GI fitting such as Tee, elbow, nipple, socket union socket etc. all as specified and as directed.

All as per item No 12 above but 20 mm dia pipe.

All as per item No 12 above but 25 mm dia pipe.

All as per item No 12 above but 40 mm dia pipe.

All as per item No 12 above but 50 mm dia pipe.

Supply and laying for 15 mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

All as per item No 17 above but 20 mm dia pipe.

All as per item No 17 above but 25 mm dia pipe.

All as per item No 17 above but 40 mm dia pipe.

All as per item No 17 above but 50 mm dia pipe.

All as per item No 17 above but 80 mm dia pipe.

Supply and fix 15 mm dia. gun metal, globe or gate valve heavy duty confirming to IS-778 with iron wheel head, screwed both ends for iron pipes for the following size of bore including dismantling the unserviceable valve, complete all as specified and dircted.

All as per item No 23 above but 20 mm dia pipe.

All as per item No 23 above but 25 mm dia pipe.

All as per item No 23 above but 40 mm dia pipe.

All as per item No 23 above but 50 mm dia pipe.

All as per item No 23 above but 80 mm dia pipe.

Repair to existing Brick Masonry Valve Pit of size 900 x 900 x 900 mm (Internal Dimension) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit.

All as per item No 29 above but of size 600 x 600 x 600 mm (Internal Dimension)

Material and Labour for mechanical joint for 150 mm dia pipe consisting of compression collars made out of Cast Iron, MS Flanges drilled as per IS for pressure rating PN1.6, including MS nuts, bolts, rubber gasket,cleaning the pipe surface,chamfering or cutting the edges of pipes for positioning, jointing and testing for the following size and of pipe material GI/CI/MS/AC all as directed and as specified by Engr-in-charge. Note : cost for excavation & earthwork will be measured and paid seperately

All as per item No 31 above but for pipe of 100 mm dia

All as per item No 31 above but for pipe of 80 mm dia

M&L in repairs for CI/DI fittings for spigot socketed pipes such as boards (any type radius and angle) tapper any type (straight,bend,increasing-decreasing or double socket etc ) Tee pieces one end flanged other end tapering up to 150 mm bore. Note: The rate quoted by the tenderer incl cost of earthwork complete

Supply and fixing 200 mm dia.CI Sluice valve class PN 1.6 flanged drill holes any pattern high pressure full way with iron wheel at the top heavy duty brass spindle, non rising type, suitable for following sizes, flanged end including two nos of flanged ends including 2 flanged joints and jointing material i.e. nuts, bolts, washers, rubber gaskets etc., including dismatling the unserviceable valve complete.

All as per item No 35 above but of 150 mm dia.

All as per item No 35 above but of 100 mm dia.

All as per item No 35 above but of 80 mm dia.

All as per item No 35 above but of 50 mm dia

Supply, laying, jointing & testing 400 mm dia DI-K9 class with spigot and socket pipe , suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Rubber Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations for the following dia of pipe including taking down the damaged pipe complete all as specified and directed.

All as per item No 40 above but of 300 mm dia

All as per item No 40 above but of 200 mm dia

All as per item No 40 above but of 150 mm dia.

All as per item No 40 above but of 100 mm dia

Supply, laying, jointing & testing 400 mm dia DI-K9 class with paddle flanged pipe , suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Rubber Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations for the following dia of pipe including taking down the damaged pipe complete all as specified and directed.

All as per item No 45 above but of 300 mm dia

All as per item No 45 above but of 200 mm dia

All as per item No 45 above but of 150 mm dia.

All as per item No 45 above but of 100 mm dia

M & L for CI Air release valves 100 mm bore, with two outlets & fixing up on water supply main with cap complete with bolts, nuts rubber insertions etc., all as directed.

Supply and replace NRV of size 150 mm, Class PN 1.0, hydrodynamically guided, closing non return valve with gray Cast iron body, synthetic rubber coated reinforced ball, flanged (Normex) type including taking down the unserviceable valve all as directed.

All as per item No.51 above but of 80mm dia all as specified and as directed.

All as per item No.51 above but of 50mm dia all as specified and as directed.

Supply and replace Foot valve size 150 mm , Class PN-1.6 with new hydrodynamically guided, closing foot valve with gray Cast iron body, synthetic rubber coated reinforced ball, flanged type including taking down the unserviceable valve all as directed.

Supply only MCCB 3 pole 415 V, 63 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply only MCCB 3 pole 415 V, Fixed type 100 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply only MCCB 4 pole 415 V, Fixed type 160 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply and fix single phase preventer relay on exisiting panel including necessary connection to panel all as specified and directed by Engr-in-Charge.

M&L for Cleaning of OH reservoir of height 20Mtr from ground level by dewatering complete by dischraging the delivery valve/ flush out valve, mannually removing sludge/mud settled at bottom, scrapping of floor/wall internally by wire brush and disposing the waste outside the pumphouse area, white wash the surface of the inner wall of sump/reservoir with one coat of lime complete in all respect including writing letters, numbers, date of cleaning and capacity of tank with Synthetic enemel white paint on black background with 10 cm height letters for 0.50 LG OHT capacity (Location: CQA (EE) Residential Area) complete to the entire satisfaction of Engr-in-Charge.

All as per item No 59 above but Capacity of tanks 0.20 Lakh Gallons.(Location: CQA (FFE ) Tech Area) & CQA (ME) Tech Area complete all as specified.

All as per item No 59 above but for semi under gound sump of Capacity 1.5 Lakhs Gallons (Location: CQA (EE) main pump house) complete all as specified.

All as per item No 59 above but semi under gound sump of Capacity 0.50 Lakh Gallons. (Location: CQA (EE) Main pump house,CQA (ME) pump house)

Supply & fixing in replacement of old damaged wire net of Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples with tinned tacks of stainless steel wire staples of Size of mesh is 12 mm complete fix in frame/ on pipe with suitable clamps all as specified and directed by Engr-in Charge .

Cutting of existing 15 mm dia. GI/DI/CI pipe of bore in position, making flanged, drilling and inserting required nut bolts washers and other accessories as required for insertion of new branch / water meters of any bore complete all as specified and directed by Engr-in Charge.

All as per item No 64 above but of 20 mm dia.

All as per item No 64 above but of 25 /32mm dia

All as per item No 64 above but of 40/50 mm dia.

All as per item No 64 above but of 80/100 mm dia

All as per item No 64 above but of 150 mm dia

All as per item No 64 above but of 200 mm dia

All as per item No 64 above but of 250 mm dia

Repair to sluice valve of 150 mm dia of double Flanged cast iron including taking out the spindle from its position, replacing the glands,nut & bolts, SS spindal and spindle nut as per existing PN Module, refixing the same in orginal position and checking for leakage all as specified and directed by Engr-in Charge.

All as per item No 72 above but sluice valve 100 mm dia.

All as per item No 72 above but sluice valve 80 mm dia.

Dismantling the pump set of capacity 20HP, fixed in foundation, transporting to work shop by opening the pump, over hauling the shafts by machining/ filling as required, replacement of unserviceable bearing and bushes, gaskets, , & greasing of pump and reassembling complete including coupling with motor and testing at site on full load all as specified and directed by Engineer-in- charge. Note : Bearings will be measured and paid separately.

All as per item No 75 above but 10 HP pump set.

All as per item No 75 above but Fire fighting Pump Set of 20 HP.

All as per item No 75 above but 5 to 7.5 HP Pump set.

Dismantling and taking down motor from pump set of 20 HP pump set fixed in foundation and transporting the same to work shop, opening the motor, removing burnt winding and cleaning of stator slots and rewinding of motor using copper winding wire of existing guage and number of turns to achieve rated speed on rated voltage and current including suitable gauge / size super enamelled winding wire, replacing paper insulating of class F and fire proof sleeves, varnishing complete including ovening, oiling, greasing, replacing wornout rear/ front bearings and reassembling complete motor, including testing at site on full load all as directed by Engr- in -charge. Note : Bearings will be measured & paid separately.

All as per item No 79 above but 10 HP motor

All as per item No 79 above but 7.5 Hpmotor

Supply only bearing DE/NDE 20 HP pumpset of bearing as per existing sample all as specified and directed by Engr- in -charge. Make : SKF

Supply only motor bearing for 5 to 20 HP motor for bearing suitable as per existing sample all as specified and directed by Engr- in -charge.

S& F in replacement love joy coupling type KL 150with spacer for 20HP

S& F in replacement love joy coupling suitable for 5 to 10HP

M & L for painting of pump, motor complet set of capacity 5 HP to 20 HP with two coats of synthetic enamel paint after preparing surfaces and writing MES / SM Nos all as specified and directed by Engr- in -charge.

M & L for painting of CI / DI / GI pipelines of any sizes in various MES Pump huse located in CQA Area complete with two coat of synthetic enamel paint after preparing surfaces and writing of Inlet/ Out let direction, Area of Feeding etc all as specified and directed by Engr- in -charge.

M & L for cement concrete (1:3:6) type D-2 (using 20 mm graded stone aggregate) as thrust block/ pipe anchorage inclduing Cement plaster in CM 1:4, 15 mm thick on brick / concrete surface and also including demolition of existing concrete complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs water pressure gauge of capacity 10 Kg/mm2 gauges dial type all as specified and directed by Engr- in -charge. Make: Hguru oren

M & L for removing water level indicator from site and replace unserviceable Indicating cable from Over head reservior and replace with new level board. (Location: CQA (EE), CQA (FE), CQA(ME))

S & F in repair tyre coupling of size A-18 with existing alignment all as specified and directed

S & F in repair any type and any size gland required as per exisitng at site as specified and directed by Engr - in - charge

Supply and fix in repair 3 pole power contactor 1 NO + 1 NC , MO 18, three phase, AC 440 Volts, 50 Hz of rated current relay range 18 Amps, including following features build in surge suppressor, common coil for 50 & 60 hz , Low pick-up VA consumption, standard accessories suitable for lug as well as lugless termination, add on blocks, spreaer link kit . Make : L & T Cat No: CS94835 or equivalent make of C & S/ABB

All as per Item No-93 above but for current relay range 32 Amps, MO 32 . Make: L & T Cat No: CS94568 or equivalent make of C & S/ABB

All as per Item No- 95 above but for over load range 16-44. Make: L & T Cat No: MPR304be160 or equivalant make of C&S/BB

S & F Fully Automatic Star -Delta starters in sheet steel enclosure Type MO, MN , ML MK< MU & MB with single phase protection feature motor rating AC-3 Duty, 415 V, 50 Hz, 3 Phase for motor capacity 10 HP to 20 HP at existing panel all as speicified and directed by Engr-in-Charge.

S & F Submersible pump controller in sheet enclosure Type MU-G motor rating AC-3 duty, 415 V, 50 Hz, 3 phase Relay range 13-42 suitable for 10 to 20 HP submersible motor all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of fully automatic star delta strater in sheet -steel enclouser type MN with single phase protection suitable for motor rating 22.5 KW 3 phase 415 Volt 50 Hz relay range 14-23 Amps. Make; L&T Cat part No. SS94364 or equivalent

M& L for cutting the existing bitumenous road /PCC/floor of approx size width 50 cm depth 60 cm along cross section of the road for laying of new CI/DI/GI or re-laying of old GI/CI pipe line, refilling and the road with PCC to match with the original finishing complete all as specified

Taking down unserviceable rubber gasket joint & supply and fix rubber gasket joint (push on / tyton joint) for spigot & socketed pipes of 200 mm dia complete all as specified and directed for the following sizes:-

All as per item No 101 above but for 150 mm dia pipe.

All as per item No 101 above but for 100 mm dia pipe.

M & L for MS Nuts Bolts washers etc all as specified and directed.

M & L for attending the emergent repairs to leakage/ damage GI pipe of size 15 mm dia to 20 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.

M & L for attending the emergent repairs to leakage/ damage GI pipe of size 25 mm dia to 32 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.

M & L for attending the emergent repairs to leakage/ damage GI pipe of size 40 mm dia and 50 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.

M & L for attending the emergent repairs to leakage/ damage DI/CI pipe of size 80 to 200 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out DI /CI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.

M & L for attending the emergent repairs to leakage/ damage DI pipe of size 300 to 400 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge. Note for item No 105 to 109: (i) Rate inclusive of jointing & earth work. (ii) DI fittings will be paid separately in respective items.

S & F water meter of 150 mm dia from existing potion, supply install and testing of Flow sensor meter and signal converter of size "6"(150 mm) wtih sensor, Transmitter, GSM/GPRS modem, SIM Card, on existing CI/DI/GI pipe line including measuring electrodes SS 316, grounding rings SS 316 cable entry size 20 x 1.5 M fitted with blind plugs, required electrical connections as required length of double shielded cable with anti link cable glands fixing at Horizontal pipe run or open feed or discharge side. The meter consist of following: 1. Model : Optiflux 2000. 2. Type : Pulsed DC 3. Meter size : 6" (150 mm ) 4. Flow tube : SS 3.4 5. Coil housing : Mild steel 6. Liner : Hard rubber 7. Electrodes : SS 316 8. Grounding type: Rings SS 316 9. Process connection : Flanged to DIN PN 10 10.Flanges : Carbon steel 11. Protection class : IP 68 with DS Cable length 25 m provided 12. Cable glands : Anti kink cable glands . Signal converter consists of the following: 1. Model : IFC 100 2. Mounting : Remote version 3. Type : Microprocessor Based 4. Output : 4-20mA, HART+Pulse/Frequency status 5. Accuracy : ± 0.5 % of measured value for velocity .0.5 m/s 6. Max Load : 500 Ohms 7. Display : Large back lit LCD display 8. Parameters: Actual flow rate, totalized flow ( 8 digit) 9. Diagnostics : Empty pipe detection 10. Local indication : Programmable by keys 11. Power supply : 230 V 12. Housing : Die cast aluminium with PU finish 13. Cable entry & gladns : M 20 x 1.5 , Polyamide Cable glands 14. Protection class : IP 67 Make: M/S Krohne Marshall Pvt Ltd. or equivalent make approved by GE. Note:- The following work is included in scope of work:- Note : -1. Testing of meter in MIDC. 2. Civil work such as installation of flow meter with necessary CI fitting, joints and earth work. 3. New SIM with SIM maintenance for one year from the date of completion.4. OEM test certificate & warranty certificate, Calibration Certificate, Hydro Test Certificate to be submitted by contractor.

All as per item No 110 above but 100 mm in size

All as per item No 110 above but 50 mm in size

M&L for cleaning of MES water supply installations/campus by surface dressing or trimming of natural ground to remove small unequalities (including removing vegetation/ shrubs/brush wood/under growth) and carrying away the rubbish to a distance of not exc 50 mtr away complete for the various water supply/firefighting installation.

Supply and laying for 200 mm dia. MS ERW PIPE with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of following sizes :-.

All as per item No 114 above but 150 mm dia.

All as per item No 114 above but 100 mm dia

All as per item No 114 above but 80 mm dia.

All as per item No 114 above but 65 mm dia

Supply and replace unservicable fire hose 63mm dia confirming to IS : 636,15 meter length including gunmetal heavy duty pair of male and female coupling all as directed by Engr in charge .

supply and replace Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard all as specified and directed by Engr in charge

Supply and replace unservicable/defactive single headed fire hydrant valve with 5mm flanged inlet and 63mm female single instantaneous outlet complete with lugs & chain as per IS 5290 hydrostatically tested to 21 Kgf/cm2 of pressure directed by Engr in Charge

M & L for carrying out "B" check through authorised dealer/ OEM once in six month or 250 Hrs of run which ever is earlier by replacement of diesel filter assembly, bypass filter assembly complete with engine oil filters, air filters including necessary "O" rings, gaskets, packings etc complete and draining out unserviceable engine oil from sump, filling of new oil and checking the proper functiong of the lubrication and coolling system all as directed and as specified for the D.G.set of capacity 160 KVA, of Make : Note:(a) The cost of Engine oil will be measured and paid seperately. (b) Any item or spare required not catered in schedule but required to carry out "B" check is deemed to be included in the quoted rate. (c ) The burnt/unservicable engine oil,filter ,gasket retrived from servicing is the contractor property.

All as per item No 122 above but D.G.Set 100 KVA, Make :

All as per item No 122 above but D.G.Set 62.5 KVA, Make :

All as per item No 122 above but D.G.Set 40 KVA, Make :

All as per item No 122 above but D.G.Set 10 KVA, Make :

Supply and repace AVR (Auto volteg reguletar ) of 40 Kva to 160 Kva any type and make as per existing make directed and specified

Supply and repace 12 Volt Battery Charger of 40 Kva to 160 Kva directed and specified

Supply and repace 24 Volt Battery Charger of 100 Kva to 160 Kva directed and specified

Supply and repace Water Hose Pipe Set of 40 Kva to 160 Kva directed and specified

Supply and repace Engine Stop Solenoid Swich of 40 Kva to 160 Kva directed and specified

Supply and repace Kay Switch upto 160 Kva directed and specified

Supply only of Engine oil suitable for DG Set sl no 73 to 77 Makes all as directed and specfied.

Supply only coolant Additive 5 Lt Pack Part .No.123200198518 all as directed and specfied.

Supply and repace Fan Belt of 40 Kva to 160 Kva directed and specified

Supply and replace battery terminal (copper) incl brazing with multistranded copper conductor all as specified and as directed.

Supply and replace ESU (Engine safety Unit) of 40 KVA to 160 KVA DG Set directed and specified.

M & L for repair/overhauling of self starter 24 Volts including replacement of carbon, bushes, rewinding of armature and field etc. and varnishing complete all as directed.

Material & labour for taking down the fuel injection pump of 40 KVA to 160 KVA of DG set for service & calibration and checking the serviceability of FIP after fixing in position incl replacement of necessary minor parts all as directed

M&L servicing/ repair of dynamo including replacement of carbon brush, brush holders, bushes/bearings, varnishing, scaling etc., as required for above DG Set

M&L servicing/repair of water pump including replacement of repair kit.

Dismantling the leaking radiator from 40 KVA to 160 KVA DG set and transporting to the workshop for repair by means of gas welding / brazing the copper tubes and reassembleing the same at the authuroised workshop and back to the site and refxing in the engine and testing complete and all as directed

M & L for fuel tank cleaning by taking out of fuel and refilling the same all as specfied and directed

Supply and fixing fuel pipe any make and type as per existing and all as directed by Engr in charge

M & L Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short

SKS Electricals

M/S - ASHOK ELECTRICALS