CONSTRUCTION OF CERTAIN TECH ACCN AND OTHER ALLIED INFRASTRUCTURE AT KHUNDRU UNDER GE 861 EWS

Amount

Note: (i) Please refer Schedule 'A' Notes given in tender documents. (ii) The Schedule 'A' Part-XII is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS

Lump sum price worked out by the contractor for BUILDING WORKS carried forward from Pre-Priced Schedule 'A' Part-I.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-II.

Lump sum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS carried forward from Pre-Priced Schedule 'A' Part-III.

Lump sum price worked out by the contractor for PCC ROAD WORKS carried forward from Pre-Priced Schedule 'A' Part-IV.

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS carried forward from Pre-Priced Schedule 'A' Part-V.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS carried forward from Pre-Priced Schedule 'A' Part-VI.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-VII.

Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORKS carried forward from Pre-Priced Schedule 'A' Part-VIII.

Lump sum price worked out by the contractor for PROTECTIVE WORKS carried forward from Pre-Priced Schedule 'A' Part-IX.

Lump sum price worked out by the contractor for FIRE BRAKE AREA WORKS carried forward from Pre-Priced Schedule 'A' Part-X.

Lump sum price worked out by the contractor for SITE CLEARANCE & EARTHWORKS carried forward from Pre-Priced Schedule 'A' Part-XI.

MISCELLANEOUS ITEMS OF WORKS (SCHEDULE 'A' PART-XII) (A) INTERNAL ELECTRIFICATION WORKS

Supply and fixing flame proof sheet metal enclosure MCB distributiion box single pole & neutral 240 Volts 8 way suitable for hazardous area laden with gases/vapour of Group II (A) and ii(B) as per IS 2148/1984 encl as per IP-55 degree of protection and as per IS 2147/1962 made out of cast of aluminium alloy LM-06 having earthing neutral terminal and in and including following complete all as specified and directed.:- (i) MCB SPN 240 Volt, 10 kA 'C' Curve 32 Amp-01 No (Incoming) (ii) MCB SP 6 Amp 10 kA 'C' Curve 32 Amp-05 Nos (Outgoing) (iii) MCB SP 16 Amp 10 kA 'C' Curve 32 Amp-01 No (Outgoing) complete all as specified and directed.

Material & Labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to Galvanized Iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of MES SSR Part-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and directed. Note:- The cost of GI Wire, GI watering pipe and GI pipe for its protection upto 7.5 m is to be included in the quoted rate. Any variation in length of earth wire shall be adjusted through deviation order.

(B) LIGHTENING PROTECTION WORKS

Material & Labour for Earthing complete with copper earth plate electrode 600mmx600mmx3.2mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.65 meter below normal ground level connected to copper strip 20x3mm by means of bolts, nuts, check nuts and washer of galvanized iron or steel besides welding at all joints as shown in drawing and including excavation and earth work, GI pipe light grade 50 mm bore for protection of GI strip and connected to continuous earth lead on pole/test point supply and laying charcoal dust common salt PCC 1:2:4 type B-1, chamber and MS angle iron frame 40x40x 3mm and RCC cover 40 mm thick(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm c/c both ways with MS handle 12 mm dia PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of MES SSR Part I drawing and connection to earth test point incl testing complete all as specified and directed. Note:- The cost of earth lead/strip, GI watering pipe and GI pipe for protection of earth lead/strip upto 7.5 m is to be included in the quoted rate. Any variation in length of earth lead/strip shall be adjusted through deviation order.

(C) EXTERNAL ELECTRIFICATION WORKS

Material and Labour for boring of road by trenchless technology for passing of cable with pipe suitable for passing upto 100 mm bore of pipe complete all as specified and directed. Note:- Pipe shall be measured and paid for separetely.

Supply and fixing of cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured conductor cable of size 25 to 70 Sqmm complete all as specified and directed.

Supply and fixing of cable route indicator made out of 50x50x6mm angle iron, 60mm long embedded in PCC block of suitable size with moulded letter 'LT CABLE' suitable inscribed including PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) block of 150x150x150mm size complete all as specified and directed.

Supply, installing, testing and commissioning, & testing LT distribution panel board, double door, pedastal mounted, size of panel is suitable for accomodate to all MCCBs/MCB and accessories, CPRI approved, IP-54, made out of 3.15 thick CRCA sheet duly powder coated, mounted on angle (65x65x6mm) iron frame of height 450mm from PCC bedding, factory assembled acompartmentalised construction, free standing type including 3 Phases & neutral 400 Amps current carring capacity aluminium bush bar having 100 Amp rating with epoxy insulated coating with colour code and insulated support, cable galleries inter connecting bus bar connection/linkage complete and conforming to IS-8623 of protection as per IS-2147 complete including making connection of cables of incoming and outgoing with thimble/lugs including the accessories, complete and mounting the panel on ground/ floor with PCC1:3:6 bedding upto a height of 30cm above ground level, complete all as specified and directed and comprising as under :-

Supply, installing, testing and commissioning & testing LT distribution panel board, outdoor type, double door, pedastal mountd, size of panel is suitable for accommodate to all MCCBs/MCB and accessories, CPRI approved, IP-54, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on angle (65mmx65mmx6mm) iron frame of height 450mm from PCC bedding, factory assembled compartmentalised construction, free standing type including 3 Phase & neutral 400 Amps current carrying capacity aluminium bush bar 100 amp with epoxy insulated coated with colour code and insulated support, cable galleries inter connecting bus bar connection/linkage complete and conforming to IS-8623 of protection as per IS-2417 complete including making connection of cables of incoming and outgoing with thimble/lugs including the accessories, complete and mounting the panel on ground/ floor with PCC 1:3:6 beddng upto a height of 30cm above ground level, coplete all as specifed and directed and comprising as under :-

Material & Labour for Earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth lead Galvanized Iron strip 32x6mm by means of bolts, nuts, check nuts and washer of galvanized iron or steel besides welding at all joints as shown in drawing and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip and connected to continuous earth lead on pole/test point supply and laying charcoal dust common salt PCC 1:2:4 type B-1, chamber and MS angle iron frame 40x40x 3mm and RCC cover 40 mm thick(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm c/c both ways with MS handle 12 mm dia PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of MES SSR Part I drawing and connection to earth test point incl testing complete all as specified and directed. Note:- The cost of earth lead/strip, GI watering pipe and GI pipe for protection of earth lead/strip upto 7.5 m is to be included in the quoted rate. Any variation in length of earth lead/strip shall be adjusted through deviation order.

(C) DUNNAGE BLOCK WORKS

Supply only FRGP hollow dunnage blocks of size 300mm x 300mm x 200mm and 10mm wall thickness made of fibre reinforced glass plastic with minimum 25% glass content in reinforced members, UV resistant , fire resistant, high load bearing and capable of taking load upto 5 ton complete all as specified and directed.

Jk Engineering Construction Co. (BID ID -3372061)

M M SHAWL Engineers and contractors pvt ltd (BID ID -3373939)

M/S SHAH CONSTRUCTION (BID ID -3373895)

SHAH AND SONS (BID ID -3373560)