Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC 80 P RAILWAY ROAD FEROZEPUR CITY | FEROZEPUR CITY | PUNJAB | ₹23.7 L | L1 | Accepted-AOC ok |
| 2 | L2₹23.8 L+₹16,632.54 (0.70%)Rejected-Finance LUDHIANA | LUDHIANA | PUNJAB | 141001 | ₹23.8 L+₹16,632.54 (0.70%) | L2 | Rejected-Finance not eligible |
| 3 | L3₹24.6 L+₹93,559.74 (3.95%)Rejected-Finance HOUSE NO 3 GALI NO 1 THANDEWALA ROAD BASANT VIHAR DISTT SRI MUKTSAR SAHIB | SRI MUKTSAR SAHIB | PUNJAB | ₹24.6 L+₹93,559.74 (3.95%) | L3 | Rejected-Finance not eligible |
| 4 | L4₹25.9 L+₹2.2 L (9.23%)Rejected-Finance | ₹25.9 L+₹2.2 L (9.23%) | L4 | Rejected-Finance not eligible |
Tender Value
₹26.0 L
EMD Value
₹51,978
Closing Date
12 Aug 2026, 12:00 pmClosed
Executive Engineer
Hucky Chowk, Faridkot
Providing 160 KVA/128 KW Silent (Sound Proof) Diesel Generator Set in DAC at Sri Muktsar Sahib
2026_CEPW_172962_1
Tender Notice 6 (Recall)/26-27
Open Tender
Electrical Works
Percentage
Sri Muktsar Sahib
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹51,978
Yes
3 Sept 2026
4 Aug 2026
12 Aug 2026
4 Aug 2026
12 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 160KVA /128 KW, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable Minimum 200 BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV+ Norms upto date amendments) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements. | |||||
| 1.01 | ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.
ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled | - | - | - | - |
| 1.02 | Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.
ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.
WARRANTY :- Manfacturer Warranty Should be 2 Year From the Date Of Commisioning Or the completion of 5000 running hours. | - | - | - | - |
| 1.03 | MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.5 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site. Critical part of Engine (Cylinder head, Cylinder Block, Cam Shaft, Connecting rod) shall be warrented 5 years from date of dispatch. | 1 | Each | 21,33,959 | ₹21,33,959 |
| 1.04 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): | - | - | - | - |
| 1.05 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- | - | - | - | - |
| 2 | Overall size 240sq.mm (3½ Core) Un- armoured (Loose) | 150 | Metre | 1,737.96 | ₹2,60,694 |
| 3DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: | |||||
| 4Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- | |||||
| 5 | Double Walled Corrugated HDPE Pipe 120/03.5mm (Outer/ Inner dia.) | 130 | Metre | 290.77 | ₹37,800.1 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
SBD1.pdf
Tender Documents • 16.88 MB
BOQ_351968.xls
BOQ • 0.34 MB
CorrigenduExtendTender.pdf
PDF • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .