Servicing, repairing and overhauling of departmental window split type Air Conditioners, departmental geysers, departmental dessert coolers and ceiling fans with rewinding work installed at non residential and residential buildings in HTPS, Kasimpur,

Amount

Part-A Job Work

Complete servicing, repairing, reconditioning work and breakdown of window/split type AC as per scope of work

Supply & Fixing of following ites:

Compressor 1.5 T for window AC

Compressor 2.0 T for split AC

Thermostat

Running/Starting Capacitor 40 MFD

Fan Capacitor,4/6 MFD

Electronic Unit(Control Cord)

Blower Fan Motor

Blade/Fan Impeller

Refrigerent Gas

Stabilizer 4/5 KVA(ISI mark)

Grill

AC Top Box

AC Box Socket

MCB 32 Amp. Single Pole(ISI mark)

Replacement of Heating Coil of 1.5 Ton Split/Window AC

Replacement of Heating Coil of 2.0 Ton Split/WindowAC

Double insulated multi- strand ISI mark 3 core supply wire 4mm dia of each core standard make

Replacement of coil insulation of split AC

Replacement of Indoor & Outdoor unit of split AC from one place to another

Fixing of outdoor unit of split AC on the brick plateform with the help of anchor fastner after fixing of pieces of copper tube and gas filling.

Making of iron cage of size 2.25x3.5x2 feet with the help of angle iron and wiremesh and fixing it on the brick plateform

Part-B (Ceiling Fans)

Rewinding of burnt ceiling fan motor of 48"/56" size.

Overhauling of ceiling fans with proper oiling and greasing including replacement of condenser, bearing & wire etc.

Replacement of damaged shaft of ceiling fans.

Repairing of bearing housing.

Paintings of ceiling fans of non residential buildings

Supply and fixing of 5-step eletronic regulator with gang box of non residential buildings.

Supply and fixing of 3 feet pipe for hanging of ceiling fan.

Supply and fixing of 23/76 copper flexible wire for conduction.

Supply and fixing of 2.25/2.5 mfd condenssor of ceiling fans at site.

Removing and fixing of ceiling fan at residential and non residential buildings including transportation from residence/office and vice versa.

Part-C (Dessert Coolers)

Replacement and Complete repairing of armature winding of exhaust fan 14 inch to 18 inch size with copper wire including Varnishing and fixing of required class B insulation and sleeves etc. Old, damaged and burnt copper wire shall be the property of the contractor

14 inches size

18 inches size

Servicing,oiling and greasing of desert cooler exhaust fan including replacement of switches, wires, plugs, condensers & bearings etc.

Replecement of cooler pads(set of 3 pads) of wood chilling including all labour charges.

Small body size coller 2.5 ft

Big body size coller 5.0 ft

Painting of two coats paint after applying one coat of primer (Burger/Nerolac/Asian paints) on desert cooler body, exhaust fan, trolley & other matelic parts etc.

Small body size cooler 2.5 ft

Big body size cooler 5.0 ft

Part-D (Gyser and Small Size Fans)

Replacement of following items:-

Immersion rod of gyser 2000 watt

Thermostat of gyser 2000 watt

Servicing of gysers including inside cleaning.

Servicing and overhauling of fresh air fans.

M/S SHREE GOPAL AND COMPANY

M/S AWAM ENGINEERING CO