Camouflage Painting to South Side of Runway in Tech Area at AF Stn Bhisiana

Amount

M&L for complete removal of existing treatment, including preparing un-decorated surface of wall or concrete surfaces & OHT and applying two coats of all weather exterior emulsion paint in camouflaging pattern as per new pattern approved by the station authority and RGB values variation from 110 to 171 of approved pattern having percentage of colours 50%, 30%,20% at a height n. exc. 25 mtr as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note: The %age of the three colours may change without any financial effect.

M&L for complete removal of existing treatment, preparing un-decorated old plastered surface of wall or concrete surfaces and applying two coats of all weather exterior emulsion paint in per sample/pattern approved by GE complete all as specified and directed by Engineer-in-Charge.

M&L complete removal of existing treatment, preparation of Old plastered surfaces of walls,pillars,chajjas etc., applying one coat of wall putty and two coats of all weather exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old surface of brick or concrete surface and applying one coat of all weather exterior emulsion paint in camoulage pattern as approved by the station authority and RGB values variation from 110 to 171 of approved pattern having percentage of colours 50%, 30%,20% at a height nexc 25 mtr as per sample/pattern approved by GE complete all as specified and as directed.

Applying a coat of all weather exterior emulsion paint over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc all as specified as directed.

M&L for painting old steel/iron surfaces of any description over 10 cm in width or girth with one coats of synthetic enamel paint after preparation of the surface complete all as specified and directed by Engineer-in-Charge. Note: The contractor make suitable arrangement to shift the concertina coil/barbed wire to carryout work & fixing in the same postion after painting. the rates are deemed to be included.

M&L Preparation of old corrugated, semicorrugated / plain steel surfaces of any description as on sloped roof, wall/cladding surfaces over 10 cm width or girth with one coats of synthetic enamel paint over a coat of red oxide in camouflaging pattern as approved by the station authority and RGB values variation from 110 to 171 of approved pattern having percentage of colours50%, 30%,20%stone at height n. exc 15mtr as per sample/pattern approved by GE complete all as specified and directed by engineer-in-charge. Note: The %age of the three colours may change without any financial effect.

Taking down cement of cement lime plaster on brick or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on in CM 1:4 on fair faces of brick work or concrete surfaces of wall, SWTs with water proofing compound @ 3% by weight of cement etc complete all as specified and directed.

Supply only Integral water proofing compound all as specified and as directed

M&L for preparing new plastered surface of wall or concrete surfaces and applying two coats of all weather exterior emulsion paint in camouflaging pattern as approved by the station authority and RGB values variation from 110 to 171 of approved pattern having percentage of colours 50%, 30%,20% at a height n. exc. 25 mtr as per sample/pattern approved by GE complete all as specified and directed by Engineer-in-Charge. Note: The %age of the three colours may change without any financial effect.

M&L for preparing new plastered surface of wall or concrete surfaces and applying two coats of all weather exterior emulsion paint as per sample/pattern approved by GE complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surfaces of walls,pillars,chajjas etc., applying one coat of wall putty and two coats of all weather exterior emulsion paint complete all as specified and as directed.

Dismantiling of mild steel work of any description not other wise provided for completed all as directed.

S&F angle/ flate iron/chanel framed work such as iron gate, fencing posts & SWT covers complete all as directed.

Dismantling expanded metal, any thickness or mesh not exc 4 kg weight per sqm, fixed with steel or wood fillets, if any

S&F welded steel wire fabric to angle iron frame not exc 4 Kg weight per square metre all as specified and directed.

M&L two coat synthetic enamel paint over one coat of red oxide and preparation surface all as directed.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for.

M&L for PCC, 1:2:4 type B1, (20 mm graded aggregate) as in repair of chajjas, suspended slab etc, including demolition with wooden hammer and necessary formwork complete all as specified as directed by Engr-In-Charge.

Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of existing roof treatment including pad concrete,cement plaster and deteriorated membranes.

M&L for cutting out cracks to V section in existing roofs or terracing, cleaning out wetting grouting with cement and slurry 1:3

M&L for cutting out cracks to V section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc

Brushing neat cement slurry with 3.0 kg of cement per sqm

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in roof as in pad concrete or leveling course.

M&l for providing cement concrete type BO (1:2:4) 12.5 mm graded stone aggregate for providing slope , roof kerbs or mud stops & SWT coping rounded or chamfered edges all as directed by engr-in charge

M&L for 10mm thick cement plaster in cement mortar 1:3, including finishing even and smooth with out using extra cement mixed with water proofing compound when concrete is green, as per manufacturere instructions complete all as specified. (Note - Water proofing compound shall be measured and paid under item No-3).

M&L for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 kg/Sqm at bottom of the membrane as bonding material, and a coat of bituminous aluminium primer on top complete all as per manufacturer's instructions all as specified and directed by Engineer-in-Charge.

S&F in repair Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and as directed by Engineer-in-charge.

S&F in repair figured glass, pin head type 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and as directed by Engineer-in-charge.

S&F 5mm thick fibre glass reinforced translucent plain sheeting with coach screw & washer in roof, wall, widows, guard post openings etc.including dismantling of existing sheet complete all as specified and directed .

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc..

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precastconcrete articles

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M/s Kamal Builders

M/s Vee Kay Associates

M/s Luxmi Constructions

M/s GURFATEH BUILDERS