Construction of Veterinary Hospital at Barotiwala, Teh. Baddi Distt. Solan (HP).

Amount

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts.

Providing & laying cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) Foundation footing bases of columns etc. and mass concrete.

b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain.

(c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.

(d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.

(e) stair cases with slopping or stopped soffits exclding landing

(f) vertical surface sch as wall any thickness partition plaster and string course and like

Providing & laying cement concrete 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work. (a)foundetion footing basis of colums etc

b) Columns, pillars, posts and struts upto floor two level.

c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

d) stair cases ( except spiral) stair cases excluding landing but i/c preparing of the surface and finished of nosing up to floor two level

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.

Random rubble/ploygonal rubble (uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand) in foundation and plinth.

Excavated earth filling under floor

Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight.

Half brick work with common brunt clay building bricks in super structure in cement mortar 1:4 ( 1 cement :4 sand 0 1st class brick

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb lock, beed and if required angle thrashold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with spilt & tails to each jamb including steel but thinges 2.5mm and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer in-charge. (a) Profile-C.

Providing and fixing panelled glazed shutter for door window and clear story window for door windows and clearstory windows with necessary screws 40 mm thick second class deodar wood

Providing and fixing wire guage shuter using galvanised m.S> wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class deodar wood

Providing & fixing brass sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete (i) 300mm x 10mm.

Providing and fixing brass tower bolts (barrel type ) anodized transparent or dyed to required shade & colour.(a)200 x 10mm

Prooviding and fixing brass finshed brass handles with nuts and secrews etc complete. (a) 125mm.

Providing and fixing oxidized brass hooks and eyes 250mm

P/F 100mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete

P/F bright finished door closer 150mm

6mm cement pilaster to ceiling in cement mortar 1:4 ( 1 cement 4 sand)

15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

15mm cement plaster in singale coat on the rough of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Appling birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Applying one coat of Acrylic primer (spectrum or equivalent of superior quality) on new concrete/maasonry/ plastred surfaces after & i/c preparing the surface by thoroughly brushing the surface free from mortor droppings & other foreign matters, sand papering the surface smooth complete.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet With top coat of regular modified polyster(RNP)organic coating of 20 microns over 5microne primer coating to Back coat of polyster of 5 microns over 5 microne primer coating i/c fixing with prepainted iron J or L hooks,bolts And nuts 6mm dia meters with prepainted limpet and rubber washer complete with all assesories as required as Per the direction of Engineer in charge.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In trusses and trussed purlins in building.

(b) In grating framed guard, bars ladders, railing, brackets and similar works i/c carriage of materials with in all lead and lift 1st floor ceiling area

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing M.S. B.P sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling i/c cutting fixing & welding to steel roof members & appling a coat of red lead primer complete as per the instruction of Engineer incharge.( base mambers of steel work shall be measured & paid sepertely.

P/f 15cm wide 45 cm overall semicircular plain G.I sheet gutter with iron brackets 40x 30 cm size bolt & nuts and washers i/c making necessary conection with rain water pipe complete in as per design

Providing and fixing MS Grills of required pattern and standard design.

P/F coolapsible steel shtter with vertical channal

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width.

Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Prov.and laying spartic ceremic tiles 5.5 mm thick in flooring (300 X 300 mm.size) treads of steps laid on a bed of 12 mm thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement.

Kota stone slab 25mm thick in rIser of steps, skiting dado and pillars lain on 12mm (average) thick cement mortar 1:3(1cement :3sand) and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete.

Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.

Conustructing course rubble hammer dressed U shape open surface drain with side wall 15X22cm in cement mortar 1:6 (1cement:6sand)and inside plastering with cement plaster 1:3 including earth and laying 10cm concrete in 1:5:10 of 40mm nominal size and 7.5cm cement concrete 1:2:4 of 20mm nominal size and finished with a floating coat of neat cement as per standard desig

Providing and laying cement concrete flooring 1:2:4(1cement:2sand:4graded stone agregate laid in one layer finished with floating coat of neat cement 50mm thick

Applying priming coat (excluding priming coat) on wood and other wooden surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Painting two coat (excluding priming coat) on wood and other wooden surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

P/L PVC pipe for rain water pipe complete with adhasive 110mm dia

P/L PVC pipe for rain water pipe complete with adhasive 110mm dia accesseries bend

P/F PVc clamps for rain water pipe 110mm dia

P/f color glass for trombe wall 5.5mm thick completein all respect as rubber washer etc.

P/F12mm thick prelaminated board bwp phenol bonded exterior/interior grade both sided 25mm thick for cup board

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

P/F 100mm size P and S trap for water closet squatting pan /c jointing the trap with and soil pipe in cement mortar 1:1(1cement: 1 sand ) sand cast iron.

Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover

P/F zet for W.C complete in all respect

Providing and fixing to wall ceiling and floor G.I. pipe (medium Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor

Providing and fixing G.I. unions. 15mm dia.

Providing and fixing PVC connection.

Providing & fiixng PVC waste pipe for wash basin or sink 32mm dia.

Providing & fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing & fixing C.P stap cocks 15mm dia.

Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make).

Providing & fixing C.P. pillar tap with capaston head. 15mm dia.

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality.

P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws.

Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete. 100 mm dia.

P/F PVC plain bend ISI marked i/c fixing with approved adhesive etc.complete (Finolex Type-B)i)110mm dia.

P/F PVC collors ISI markes i/c fixing with approved adhesive etc. complete 100mm

Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings.

P/F on wall face PVC ( D-plast) spigot pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete-110mm dia pipe

P/F Laboratory sink of ISI make with drain board & C.P. Waste with C.I. Or M.S. Brackets painted with i/c cutting holes etc. vitrouse china 750mm x 450mmx 250mm with bowldepth 200mm.

Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. (Cera/Pariware make).

Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand :4graded stone nominal size) foundation concrete 1:4:8 (1 Cement: 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm in cement morter 1:3 (1cement : 3sand) finished with a floating coat in cement concrete 1:2:4) (1cement: 2sand :4graded 20mm stone nominal size) finished smooth including curing & testing complete. Inside size 800mmx800mmx1000mm deep including C.I. cover with frame and cover to be not less than 58kg. Weight of frame 58kg. and weight of cover not less than 116kg with 200 thick.

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 30 mm Red Sand stone

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineerin-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).

Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work / CC/ R.C.C. and making good etc. complete. (32 mm)

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not mkore than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed.

Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:-(a) Foundation footing bases of columns etc. and mass concrete.

b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain.

(c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.

(d) vertical surface sch as wall any thickness partition plaster and string course and like

Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work (a)foundetion footing basis of colums etc

b) Columns, pillars, posts and struts upto floor two level. up to floor two level

c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.

Providing & laying cement concrete 1:4:8 (1cement :4sand :8 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth under B/wall beam

Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In grating framed guard, bars ladders, railing, brackets and similar works i/c carriage of materials with in all lead and lift

15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Appling birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Applying one coat of Acrylic primer (spectrum or equivalent of superior quality) on new concrete/maasonry/ plastred surfaces after & i/c preparing the surface by thoroughly brushing the surface free from mortor droppings & other foreign matters, sand papering the surface smooth complete.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

20 mm cement concrete topping 1 : 2 to 3 ( 1 cement : 2 to 3 stone aggregate of size 4.75mm & below, by volume) laid over & finishing momolithuic with base cocrete.

Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 Kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or steel pins etc. as directed (posts and struts of wood, concrete, steel etc. and straining bolt shall be paid for seperately.

Painting two coats(excluding priming coat) over new steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.Enamel paint other than white.

P/L heavy duty precast cement conc. Interlock ing paver block vibro compected 60mm thick iner locking paver block and Technical specification Clause-1504 (60 mm thick C.C. paver block of M-30 grade approved by HPPWD (NTC/Ashok Panjla Tiles/NTCCI/Pooja Concrete Fabricators, M/S Dalal Tiles Pvt. Ltd.) with approved color design and pattern) and as per direction of Engineer-in-charge.

Amardeep Singh

RAJ KUMAR

Udit Sharma