SPECIAL REPAIR TO BLDG NO P-01 MES IB SHIMLA UNDER GE JUTOGH.

Amount

Dismantling of floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Removing building materials to distance exc 1.5 Km but not exc 12 Km and depositing where directed all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in sub base for floors, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 350x250x7mm/ 450 mm x 300 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick of light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for chequered cement concrete tiles prepolished laquar finish of size 300 x 300 x 22- 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for granite (of any type) tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing fixed over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 18- 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado fixed over and including 10mm thick cement plaster in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to atch the shade of granite stone including grinding and polishing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S&F for framed work as in steel gate in( ornamentel and intricate design) such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes;framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe-290.Gde -E-165 including all fittings and fixtures etc complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, rafter, sun shades,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) conforming to Fe-410-W(Gde-E-250) quality-B including distance pieces, cleats etc, complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for acryalic transparent sheet 3mm thick stronger and lighter than glass of an colour as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Mild steel sheet eaves gutters, 1.6mm thick 300mm dia galvanised class 3, half roundwith rounded edges, complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/ concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 10mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement mixed with WPC complete all as specified and directed. Note :- WPC will be measured and paid separately.

M&L for preparation of newly plastered surfaces of walls and applying two coat oil bound distempering over a coat of a coat of alkali restant primer and with wall care putty (3mm thick), complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for PCC, 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in hold fast block, lintel, slab,coping or similar work and finished the surface with existing and including necessary form work, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over,cut to length, bent to shape required,including cranking, bending spirally for hooping for coulmns,hooking ends and binding with and including mold steel wire (annealed) not less than 0.9mm dia or securing with clips etc,complete all as specified and directed.

All as per item No -29 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

Dismantling wall, ceiling and floor boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, GI grid/wooden frame work, complete all as specified and directed.

M&L for Providing and fixing Gypsum Board tiles for insulation and acoustic purposes of size 600 X 600mm, 12mm thick in ceiling fixed with screw a timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

S&F for GI frame powder coated work of size 605 x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for 4mm Veneered decorative teak plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws/adhesive solution to plywood/flush door shutter/cupboard shutter/wooden chowkhats including surface preparation and necessary varnice as in wall panelling complete all as specified and directed.

S&F for 9mm plywood grade BWR type BB fixed with screw to timber frame as in wall panelling complete all as specified and directed.

M&L for Plain fillets exc 6sq.cm and n exc 13sq.cm square,rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed.

M&L for Chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc.,Mouldings n exc 75mm girth on softwood complete all as specified and directed.

S&F for 8mm thick shear wood flooring of rectangulaer/ square shape and size including necessary water proofing sheet and foam along with fixing arrangment complete all as per direct receive to concrete surface /wooden surface etc complete all as specified and directed.

M&L for hardwood 2nd class 25mm planed one side,with butt joints and fixed with nails fixed in floors and similar work complete all as specified and directed.

Demolition of boarding of any description and in any position complete all as specified and directed.

S&F for 25mm thick flush shutters, as in cupboards solid core construction, with block board core and plywood face panels, commercial type both face is covered with decorative face veneer with ist class hardwood lipping/frame to match complete all as specified and directed.

S&F for 18/19mm thick block board ,grade 2 quality interior grade ,decorative type veneer on both faces decorative lamination and other side balancing white lamination as in cup board shelves including 6mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging complete all as specified and directed.

S&F for 75mm brass handle ,fancy type anodised as cupboard fixed with brass screw , bright finished complete all as specified and directed.

S&F for Brass handles 150mm, fancy type,polished bright complete all as specified and directed.

S&F for Butt hinges, 100mm cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

S&F for Brass Locks, cupboard,grade I, size 50mm, 4 lever complete all as specified and directed.

S&F for magnet catcher as approved by Engr-in-charge and fixed with brass screws & washers in cupboard PVC shutters complete all as specified and directed.

S&F for 4 lever Brass Mortice lock, vertical type, size 100mm complete all as specified and directed.

S&F for Aluminum extruded sec body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed, complete all as specified and directed.

S&F for Brass sliding door bolt 375mm long WITH DIE CAST BRASS HASP STAPLE(BOLT TYPE) and fixing bolt with roller or drawn brass bolts and fixed in door shutters complete all as specified and directed.

S&F for Continuous (piano) hinges 40mm, brass, bright finish or elec?trogalvanised complete all as specified and directed.

M&L for Second class hard-wood clean swan Timber framed /cupboard/ window /door chowkhatand fixed in repair complete all as specified and directed.

M&L for finishing two coats with synthetic varnish of approved shade on new surfaces over thin varnish on under coating of any description, over 10cm in width or girth complete all as specified and directed.

M&L for finishing one coat with synthetic varnish on old Surfaces over thin varnish on under coating of any description, over 10cm in width or girth complete all as specified and directed.

Taking down Chowkats or Frame with shutter, n exc. 1.50 Sqm Each (without Taking Off Shutters from the Frame) ,including making good disturbed surface complete all as specified and directed.

Taking down Chowkats or Frame with shutter,exc 1.5 sqm but n exc 4 sqm each (without Taking Off Shutters from the Frame), including making good disturbed surface complete all as specified and directed.

S&F for Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0, complete all as specified and directed.

S&F for Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life complete all as specified and directed. Note:-M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F for aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side refelctive glass and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter as under complete all as specified and directed. Note:-(I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7 thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER make Godreg (x) Hold fast aluminium 100mm long (xi) 1 Nos hydraulic door closer each shutters (xii) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door.

S&F for Aluminium anodised powder coated sliding type three track window/ventilator with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 61.50 x 31.75 x 1.3mm thick for top and sides, 68.50 x 31.75 x 1.2mm thick, bottum and shutter frame 38 x 18 x 1.5mm thick, Aluminium grill 6 mm dia design No. DG-102 make DEDO grill or design No. A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts etc. complete all as specified and directed.

S&F for Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of apertures 1.18mm fitted with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

S&F for sheet glass ordinary quality 4mm thick glazing in square/ rectangle n.exc 0.50sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

S&F for in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod fixed with PVC rawl plug with ss screw complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, three layered, marked embosed, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

S&F for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F for galvanised mild steel pan mortar (Tasla) 21-22 inch dia not less than1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt including fixing on water storage tank as tank cover complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed.

M&L for 15mm mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors complete all as specified and directed.

All as per item No -75 here-in-before but for 20mm dia bore, complete all as specified and directed.

Refixing 15mm bore old Steel water tubing and connections of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

All as per item No -77 here-in-before but for 20mm dia bore. complete all as specified and directed.

S&F for in repair 20mm dia gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed.

S&F for in repair PVC connection 15mm size with CP nuts of length 600mm long complete all as specified and directed.

S&F for 32mm dia Low density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls. Ceilings or in floors etc, complete all as specified and directed.

Dismentling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/floor/wall if required of 100mm dia complete all as specified and directed.

Dismentling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/floor/wall if required of 75mm dia complete all as specified and directed.

S&F for 100mm dia (sand cast) Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,complete all as specified and directed.

S&F for 100mm dia (sand cast) Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed in walls complete all as specified and directed.

S&F for 75mm bore sand cast pipe Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall, complete all as specified and directed.

S&F for 75mm bore sand cast pipe Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F for 100mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 75mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for in repairs branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore with oval access door complete all as specified and directed.

S&F for 75mm dia cost iron Single 'Y' junctions laid and jointed, complete all as specified and directed.

S&F for in repairs cast iron cowls of 100mm dia complete all as specified and directed.

S&F for in repairs cast iron cowls of 75mm dia complete all as specified and directed.

S&F for in repairs stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof suitable for 100mm bore of pipe complete all as specified and directed.

S&F for in repairs stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof suitable for 75mm bore of pipe complete all as specified and directed.

S&F for in repairs cast iron floor trap 75mm dia with SS grating incl jointing to waste pipe fixed in PCC 1:2:4 type B-1 complete all as specified and directed.

M&L for complete removal of existant treatment including preparation of surfaces of walls and applying two coats of oil bound distempering over and including a coat of alkali resistant primer and wall care putty (3mm thick) complete all as specified and directed.

M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint at any height of building / tower incl necessary scofolding complete all as specified and directed.

M&L for preparing old wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint on old wood or wood based surfaces complete all as specified and directed.

M&L for preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exc 10cm width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint over prepainted old steel surfaces exc 10cm width or girth including preparation of surface complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed. Note:-(a) M&L for preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25. (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed . (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

M&L for PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggrete as in foundations, filling and mass-concrete as in sunken floor etc, Complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in floor etc Complete all as specified and directed.

S&F for Brass CP kitchen sink Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe Complete all as specified and directed.

Dismantling of existing steel/wooden railing Complete all as specified and directed.

S&F for tubular stainless steel railing/grill with top knobs including welding in vertica/horizontal including with special shape washers etc and fixing in concrete surface complete all as specified and directed.

S&F for two way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) 15mm dia bore type with handle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for 15mm dia wall mixer(hot and Cold) 3 in 1 (Provision for over head shower and hand shower) with extended spot type with 450mm braided connection pipe (Without POP UP) complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for in repairs Health faucet (ABS Body) with 8mm dia 1.00m long flexible tube(PVC /stainless steel coated) and wall hook Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for Vitreous china wash down water closet pan (pedestal pattern) white/coloured cascade type 640X360X690 (monolithic flush cistern type) single picece water closet with soft closing PP seat cover , Hinges fixing accessories set including flush cistern with P/S-Trap of size 220mm all as per manufacturing instructions Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for brass CP Angle /Stop cock with long shank and cup (concealed type) with wall flange 15mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for CP Toilet paper holder with flap cover fixing with all necessary arrangementsscres etc, Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for 15mm dia Wash Hand Basin mixer (hot and Cold) with extended spot type with 450mm braided connection pipe (Without POP UP) Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&f for Soap dispenser push button model capacity 0.8 ltr of ABS body fixed all as per manufacturing instructions complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for CP Towel Rack 600mm long with out hangers and with lower hanger including with all fixing arrangemetns complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for 600mm long glass shelf with stainless steel railing including with all fixing arrangemetns Complete all as specified and directed. Make: Jaquar and equivalent in Hindware,Perryware and Kohler.

S&F for looking mirror of size 900x600x6 mm with fixing arragement complete all as specified and directed.

S&F for stainless steel 200mm overhead shower with 450 mm long arm crome finish with rotating connector the swivel ball design in connector allows to adjust the angle of the head in 360 degree Complete all as specified and directed. Make: Jaquar or equivalent in Hindware,Perryware and Kohler.

S&F for in repairs vitreous China wash basin pedastal pattern super white/ colour of size 560x475mm including all fittings complete, decorative type complete, fixed complete all as specified and directed. Make: Jaquar or equivalent in Hindware,Perryware and Kohler.

S&F stainless steel railing ,balustrade charactrized by double plate steel with buttonhole newel posts stainless steel horizontal bars and round stainless steel pipe not less than 40mm dia with end caps (posts should be provided at every 3rd step) and toughened glass 12mm thick including fixing in steps and making good as per existing finish complete all as specified and directed.

Taking down shutters chowkhats of any description exc 1 sqm and n. exc 2 sqm each and refixing in same opening and adjusting including repair of hinges Complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc to be measured seperately) , removing materials to store for keeping in safe custody for taking credit and making good to disturbed surface to wall ,floor etc Complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm in existing concealed Conduit for one light /fan point controlled by one switch incl contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , all as specified and directed.

All as per item No -125 here-in-before but One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

All as per item No -125 here-in-before but One 5 pin 5/6 Amp socket on independent board, complete all as specified and directed.

All as per item No -125 here-in-before but One 3 pin 15 Amp socket independent but with 2.5 sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm complete all as specified and directed.

All as per item No -125 here-in-before but One bell point controlled by one push button switch, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with CASING N CAPING with all fixing accessories, for one light /fan/bell point controlled by one switch incl contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , all as specified and directed.

All as per item No -130 here-in-before but One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

All as per item No -130 here-in-before but One 5 pin 5/6 Amp socket on independent board complete all as specified and directed.

All as per item No -130 here-in-before but One 3 pin 15 Amp socket independent but with 2.5sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5Sqmm complete all as specified and directed.

S&F for Modular switch 1way 6A 240 V 1 module complete all as specified and directed.

S&F for modular bell push 1 way 6A, 240 V 1 module complete all as specified and directed.

S&F for Modular sockets 6A 2/3 pin combined 2 module 230 V complete all as specified and directed.

S&F for Modular sockets 6A/16A 2/3 pin combined 2 module 230 V complete all as specified and directed.

S&F for Modular switch 1 way 16 Amps 230 Volts 1 module AC complete all as specified and directed.

S&F for ceiling rose polycarbonate body, 65 x 20mm three terminal complete all as specified and directed.

S&F for white cover plate 3 Module complete all as specified and directed.

S&F for white cover plate 8 Module complete all as specified and directed.

S&F for Metal flush box 3 module complete all as specified and directed.

S&F for Metal flush boc 6/8 Module complete all as specified and directed.

S&F for Telephone socket complete all as specified and directed.

S&F for TV socket complete all as specified and directed.

S&F for in repair PVC conduit not less than 20mm dia complete all as specified and directed.

S&F for Telephone wire 2 pair complete all as specified and directed.

S&Ffor Cable TV co axial cable complete all as specified and directed.

S&F for sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar ccomplete all as specified and directed.

S&F for VTPN prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down complete all as specified and directed. Note :- MCB/SP/TP shall be measured in respective items.

S&F for sheet metal enclosures for MCB distribution board SPN 12 way double door type with 200 Amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

S&F for MCB TPN 63 Amps 415V incl all termnials, fitting etc complete all as specified and directed.

S&F for MCB SPN 32 to 40 Amps 250V incl all termnials, fitting etc complete all as specified and directed.

S&F for MCB SP 6-32 Amp ,240 Volt complete all as specified and directed.

M&L for replacement of call bell electric (ding dong type) , 240 Volt , single pole complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn in and including PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two runs of cable and one run of PVC conduit and one run cable of earth continuity wire shall be measured as one run.

M&L for in replacement of submain wiring with 4X10sqmm + 1 X10sqmm earth wire single core PVC insulated FRLS PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement with all accessories complete all as specified and directed. Note: Five runs of copper wire for phase, neutral, earth & one run of PVC conduit/ casing and capping shall be measured one run.

S&F for in replacement LED WALL LIGHT fitting with 10 watt LED complete connection with copper wire complete all as specified and directed.

S&F for in replacement LED mirror ligh 10 watt with diffuser, decorative type complete all as specified and directed.

S&F for in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed.

S&F for in replacement 36/40W LED (Size 2'x2') square shaped Recess mounting type luminaire having white polycarbonate body & Alumium heat shink with PMMA diffuser, 5700K including connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed. Make:- Polycab Cat ref PCGLBLP 01 40 E 57, CROMPTON CAT REF LCPL-36-CDL, BAJAJ CAT REF-BZRSQL 36W GZi WH LED.

S&F for LED die cast aluminium housing opal white PC diffuser IP 54 with in built LED Bollard light for staircase complete all as specified and directed. Make:- Jaguar cat part No LBLD04R108XW or equivalent make in havellsor CG

S&F for Water heater storage type, electric supplied of capacity 25 litres minimum 5 stars rating ,8 Bar Pressure , vertical mounted complete, including all accessories and fitting etc. complete all as specified and directed.

S&F for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp 240V complete all as specified and directed.

S&F fresh Air Fan made of PVC body 230 mm sweep 900 RPM, 230V including fixing arrangement complete with louver sutters and making opening in wall of suitable size incl making good to the surface of wall ( For rooms & bathroom) including taking down old unserviceable fan complete all as specifed and directed. Note:- Old U/s fan shall be deposited in E/M store yard by the contractor without any extra cost.

aggarwal traders

M/S Meera Builders