AS PER SERIAL PAGE No. 1(CONTENTS PAGE) OF TENDER DOCUMENTS UNDER GE (EAST) JABALPUR

Amount

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

Hard core of stone (granite/ basalt/ trap) boulders or broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement forming joints to full depth at every 3M intervals and at every change of direction and filing with bitumen sand mixture 1:3 by weight complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick, PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of floors and the like etc considering the floor slope complete all as specified and directed.

M&L for 100 mm thick, PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of floors and the like etc considering the floor slope complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and sub base finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation, filling and sub base finished even and smooth without using extra cement complete all as specified and directed.

M&L concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 100 mm bore sewer pipe line complete all as specified and directed.

M&L for DPC, 40 mm thick, cement concrete (1:2:4), type B0, using 12.50 mm graded stone aggregate, mixed with WPC (liquid type) as per manufacturer’s instructions, including necessary formwork, complete all as specified and directed.

M&L for forming construction joints 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed. ( Joint will be made in concrete after setting of flooring and cutting the joint by diamond cutter or suitable mechanical cutter )

M&L for forming 12 mm thick Expansion joint filled with pre-formed bituminous filler & top 30mm primed & sealed with sealing compound, Grade `A' , thickness of concrete slab 50 mm complete all as specified & directed.

M&L for 60mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for 80mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-40 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for providing and laying at or near ground level factory made Pre cast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part there of over or under 30cm ditto complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in filling under undulation of roof top, chajjas, beam, roof padding, roof kerbs or mud stops, rounded or chamfered on edge including necessary form work if required complete all as specified and directed.

Dismantling brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Dismantling of stone slab and tile of any description or thickness of floor , aprons etc laid, bedded and pointed in any mortar including removal of debrise to out side MD land complete all as specified & directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and exc. 1.5m but n. exc. 3.00 m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/ dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/ dense soil, each n.exc 0.5 cum, getting out and removing surplus spoil to a distance n.exc 50 m and making good the disturbed surface complete all as specified and directed.

M&L for forming embankments at OMC, including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base ( filling shall be done by approved earth or moorum ) complete all as specified & directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for moorum / red bajri filling in, floor or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for earth filling under floor Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil exceeding 250 m but n. exc. 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated soil exceeding 50m but n. exc. 100 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for brick work with sub class B bricks, old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

Taking down loose plaster over rusted reinforcement and then cleaning rusted reinforcement and exposed concrete surface by sandblasting using mechanical devices or any other established methods and treating the reinforcement in following stages complete:- (a) Application of two coats of mineral based polymer modified corrosion inhibiting primer colusal MK + Colusal 25. (b) Application of two component polymer based bond coat Zentrifix HB + Nafufill BB2 or mortar low permeability or guniting with guniting aid . (c) Application of carbonation resistant polymer modified ready to use fine mortar, nafuquick+nafufill BB2 or Zen-trifix F82 + Nafufill BB2 over the whole surface. (Note : The above application shall be carried out by the authorised Applicator of M/s MC-Bauchemie (India) Pvt Ltd or any other Manufacturer as approved by GE.)

M&L rendering 15mm thick in cement plaster 1:6 on surfaces fair faces of brick work and surface finished even and fair without using extra cement all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering in two layers, first layer 10mm thick in CM 1:4 and other finishing layer 5mm thick in CM 1:4 with and including water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on ceiling, finished even and smooth without using extra cement complete all as specified & directed.

Supply and fix factory made steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed.

Supply and fix factory made pre-coated steel windows/ ventilators flash butt welded with side hung shutters including box type hinges with pre-coated handles, pre-coated tower bolts, pre-coated steel peg stay 250mm long with suitable lugs and with glazing bars dovetailed or welded with and including provision of guard bars complete all as specified and as directed.complete all as specified & directed. Notes: (i) For construction details, TD drawing No. CEJZ/TD/980 Sheet 1/2 & 2/2 shall be followed. (ii) Wiremesh/ glass panes shall be measured and paid separately in "supply only" under respective items of BOQ.

S&F figured glass, pin head type 4.0 mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery.

S&F figured glass, pin head type 3.0 mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery.

S&F sheet glass, ordinary quality 3.0mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery.

S&F sheet glass, ordinary quality 5.5 mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery.

S&F of galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

S&F of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

Dismantling of AC (corrugated or semi corrugated etc.) sheets including ridges in roof coverings complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for RCC (1:1.5:3 ) Type A-1 (using 20mm graded crushed stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, raft etc and mass concrete complete all as specified and directed.

M&L for RCC (1:1/2:3) (Nominal mix) type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC (1:1/2:3) (Nominal mix) type A-1 (using 20mm graded stone aggregate) for roof beam and lintel beam complete all as specified and as directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC (nominal mix) 1:1.5:3 type B1 using 20 mm graded stone aggregate as in roof slab supported on wall, beams and columns etc. complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) as in foundations, footing, plinth beams, bases for columns, mass concrete and the like etc for boundary wall complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts and the like etc; complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) as in roof slab supported on wall, beams and columns etc. complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) for beams, cantilevers, bressumers and lintel over 1.5 m span complete all as specified and as directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified & directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) and rough finish surface of concrete is flat complete all as specified & directed.

M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 Gde E-165 as in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel round bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed.

Chain link MS galvanisd fencing, any size or type complete all as specified & directed.

Supply and fix rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

Supply and fix rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified & directed.

M&L for mild steel work of sections conforming to Fe.290.Gde-E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings inclusive of steel sheeting, running rails & guides and hanging, fastening & fixing complete all as specified & directed.

M&L for mild steel conforming to Fe.290.Gde-E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

S&F of Welded steel wire fabric to wood or steel members weight not exceeding 4 kg/sqm complete all as specified & directed.

S&F rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. Note : 1. The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. 2. Truss design shall be got done by the contractor duly wetting by Government Engineering College/NIT and expansion including in quoted rates.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 Cm but not exceeding 10 Cm long complete all as specified & directed.

M&L for 11 to 15mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 Cm complete all as specified & directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50 mm thick (AZ-150) corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and apply two coats of oil emulsion distemper over a coat of alkali resistant primer for smooth finish of wall complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying 3 mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment and preparation of surfaces for further treatment and applying 3 mm thick wall care putty and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement primer complete all as specified & directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint over & including a coat of white cement primer complete all as specified & directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of alkali resistant primer complete all as specified & directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying a coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18Sqm but not exc 0.38Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for glazed ceramic coloured tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for 18-20 mm thick granite of approved quality as in platform i.e. in horizontal & vertical position, machine cut (table rubbed and polished) laid over and including 15mm thick layer of screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

M&L for rubber mould factory made coloured cement concrete chequered tiles with grey cement and pigments 300mm x 300mm x30 mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

Rounding to edges of stone slabs one edge, such as in seps, cooking platform and other similar situations complete all as specified and directed.

Taking down/ removing existing roof treatment over roof slab, roughening surfaces of old concrete floor/ roof/ terrace by picking and wire brushing the surface to remove the loose concrete, dust etc sweeping clean and washing down with water to remove dust, etc including removal of debrise to out side MD land complete all as specified & directed.

M&L for 10mm thick rendering over roof surfaces in CM 1:3 with using liquid water proofing compound @ 3% by wt of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid separately as "Supply Only" under respective item of BOQ.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum over lap of 100mm and over lap shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer's as specified for polymeric water proofing membrane.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified & directed.

Supply only water proofing compound (liquid) ISI marked of make as approved by GE complete all as specified & directed.

Taking down Chowkhats or frame with shutter (w/o taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (w/o taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply and fix 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply & fixed 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed.

Supply & fixed 75mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply & fixed PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified & directed.

Supply & fixed PVC (SWR) junction single (single T), equal or unequal, 75 mm bore complete all as specified & directed.

Supply & fix , PVC (SWR) branch piece (single Y), equal or unequal, 110 mm bore with accwss door complete all as specified & directed.

Supply & fix , PVC (SWR) branch piece (single Y), equal or unequal, 75 mm bore with accwss door complete all as specified & directed.

Supply and fix, 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

Supply and fix, 75 mm bore PVC (SWR) vent cowl complete all as specified & directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 100mm, set in cement mortar complete all as specified and directed.

M&L for salt glazed stone ware (SGSW) pipe conforming to IS, laid in trenches and jointed in CM (1:1) for 150 mm bore of pipe complete all as specified and directed.

Supply & fixing in UPVC waste pipe of 100 mm dia in any length with or without ears with cement joints fixed to wall complete all as specifed & directed.

S & F stack clamps, out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc complete all as specified and directed.

S&F PVC (SWR) gully trap, out let dia 125/110mm, plain with grating including jointing with solvent complete all as specified and as directed.

S&F PVC (SWR) 'S' trap of 110 mm dia complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supplying and laying of CPVC pipes 16 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and nrass treaded fitting for fixing taps and valves complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, design & make/ pattern as approved by GE complete all as specified & directed.

S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Supplying & fixing in repairs, 25 mm dia of PVC coated mild steel, curtain rod fancy type with brackets of brass fancy type fixed on walls with brass screws and with curtain ring complete all as specified & directed. Note:- Cost of any number of brackets shall be deemed to be included in the quoted unit rate and nothing extra shall be paid on this account.

Supplying & fixing in repairs, mild steel fancy type nobs and bracket and including all necessary fitting complete all as specified & directed.

S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190 gms) complete all as specified & directed.

Supply & fix in repair WPC double door frame 125 X 65 mm including all fitting making good to disturbed surface complete all as specified & directed.

Supply & fix in repair WPC double door frame 95 X 45 mm including all fitting making good to disturbed surface complete all as specified & directed.

Supplying & fixing for 125x60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified, supplied and fixed complete all as specified and directed.

Supply & fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified & directed.

S & F, in repair, Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete including necessary welding if fixed in steel door.complete all as specified and directed.

Supply & fix Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, as per specification & drawing complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in frame complete all as specified & directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed.

S&F factory made solid plain WPC (wood polymer composite) flush door shutter of 35 mm thick including making good to disturbed surface complete all as specified & directed.

S&F in repair factory made solid plain WPC (wood polymer composite) flush door shutter of 35 mm thick including making good to disturbed surface complete all as specified & directed.

S&F in repair 18 mm thick PVC sheet with one side prelaminated of approved texture (CELUCA PLY) as in cupboard (with shelves and partitions) as per manufacturer instructions complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-21 complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, medium weight, cold rolled of stainless steel complete all as specified & directed.

Supplying & fixing 125 mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified & directed.

Supplying & fixing aluminium handles 100 mm size, cast type, anodised complete all as specified & directed.

Supplying & fixing aluminium handles 150 mm size, cast type, anodised complete all as specified & directed.

Supplying & fixing 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified & directed.

Supply & fix 300 mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supplying & fixing 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supplying & fixing 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supplying & fixing 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15 mm bore of pipe complete all as specified and as directed.

Supply & laying of 20mm bore medium grade galvanised steel pipe with all fittings and fixed complete complete all as specified & directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20 mm bore of pipe complete all as specified and as directed.

Supply & laying of 25 mm bore medium grade galvanised steel pipe with all fittings and fixed complete complete all as specified & directed.

Supply & fix, 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply & fix, 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F, brass CP shower rose 125 mm dia suitable for 15mm bore GI pipe as approved by GE complete all as specified and directed.

S&F in repair, brass CP shower rose 125 mm dia suitable for 15mm bore GI pipe as approved by GE complete all as specified and directed.

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 975 mmx 750 mm x 300 mm width, of trade pattern complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.

Supply & fix vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply & fix in repairs kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed.

Dismantling of water tank of any description of capacity exc. 250 litres but not exc. 500 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 2000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank and removing to store complete all as specified & directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank and removing to store complete all as specified & directed.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank and removing to store complete all as specified & directed.

Supply & fix, 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 210 gms)

Supply & fix, 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

Supply & fix Soap dish, stainless steel, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply & fix , vitreous china urinal bowl type, white (back or corner wall type) flat back with grating and union for discharge pipe & chromium plated water spreader for urinal (excluding waste pipe, trap and supply pipe to flushing cistern) but including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified & directed.

Supply & fix , vitreous china urinal half stall, white (back or corner wall type) flat back with grating and union for discharge pipe & chromium plated water spreader for urinal (excluding waste pipe, trap and supply pipe to flushing cistern) but including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified & directed.

Supply & fix , Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

S&F 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, screwed down for iron pipe or brass ferrule complete all as specified & directed.

S&F 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed.

S&F in repair 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed.

S&F 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water along with CP brass caps screwed for fixing complete all as specified and as directed.

Supply and fix 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fix in repair 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fix 20 mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fix pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed.

Supply and fix in repair pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed.

Supply & fix vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed.

S&F plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed..

Supply and fix 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.

Supply & fix in repairs vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed.

S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts complete all as specified & directed.

S&F 15mm bore PVC connection pipe 300 mm long with PTMT nuts complete all as specified & directed.

Supply & fix in replacement, waste coupling of PTMT (half or full threaded) 32mm bore (minimum weight 45 gms) with and including flexible PVC waste pipe complete all as specified and directed.

S&F of Waste fittings brass, chromium plated for 32 mm dia for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Cutting chases in brick walls, pinning in brick wall/ stone concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good as per existing, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in surface channel and drain including saucer drain and toe wall etc complete all as specified and directed.

M&L for septic tank conventional on site LDPE septic tank designed to carry sewage and sullage water , including excavation and PCC 1:4:8 for foundation , vent shaft, connection etc complete for 10 users capacity complete all as specified and directed.

M&L for contruction of soak well 1.8 m dia and 3.0 m in depth including excavation and earth work in any type of soil complete all as specified and directed.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified & directed.

Taking down main switches/ DB's (alongwith existing board, MCCB, MCBs & isolators) including removing the same from site and making good disturbed surfaces complete all as specified & directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified & directed.

Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.

Taking down carefully single phase electric meter carefully including dis-connection and again fixing the same after rewiring of Quarter and connecting wiring complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light/ fan/ exhaust fan/ bell point controlled by one no one way piano type switch 5/6 Amps complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light point controlled by one no. two way piano type switch 5/6 Amps complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 2.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

M&L for point wiring concealed type with 4.0 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix switch piano, flush type single pole, two way 15 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 2 pin 5/6 Amps and 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & fix modular switch one way 6 Amps, 01 module complete all as specified & directed.

Supply & fix switch socket combination 2 in 1, 16A, 6 pin, 3 module flush universal type controlled by one switch complete all as specified & directed.

Supply & fix switch socket combination 2 in 1, 2/3 pin, 5/6 Amps shuttered flush type multipurpose controlled by one switch complete all as specified & directed.

Supply & fix switch socket combination 2 in 1, 3 pins 5/6 Amps and 3 pins 15/16 Amps flush universal type controlled by one switch complete all as specified & directed.

Supply and fix , angle type lamp holder insulated with polycarbonate body and back plate housed with porcelain base suitable for 10 Watt LED with and including 10 Watt retrofit type LED complete all as specified and directed.

Supply and fix , angle type lamp holder insulated with polycarbonate body and back plate housed with porcelain base suitable for 10 Watt LED complete all as specified and directed.

Supply & fix bell push, single pole one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix modular Fan step regulator, 120W - 2 module complete all as specified & directed.

Supply & fix , rotory stepped type electronic fan regulator mini flush type 120/ 280 Volts complete all as specified & directed.

Supply and fix Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified & directed.

Supply & fix modular metal flush box 1/2 module concealed in wall complete all as specified & directed.

Supply & fix White cover plate with frame, 1 module complete all as specified & directed.

Supply & fix modular TV co-axial socket complete all as specified & directed.

Supply & fix Rigid non-metallic PVC conduit of 25 mm dia and all accessaries inclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified & directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 10 sqmm, 2 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 95 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 120 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 150 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 185 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 240 sqmm, 4 core including jointing materials such as cable glands & lugs etc after taking out the old unserviceable cable and testing on completion complete all as directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover, class HV, type2 , Flat, size 450mmx180mmx40mm laid in trenches for underground cable complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, class LV, type1 , Flat, size 250mmx150mmx40mm laid in trenches for underground cable complete all as specified and directed.

Supply and laying Sub Class 'B' old size fly ash bricks laid in trenches as cable cover with width equal to the length of brick , laid flat, complete all as specified and as directed.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.

M&L for Porcelain aerial fuses for line wire of 3 mm dia and current of 30 Amps, with brass contact bolts and nuts complete all as specified and directed.

M&L for Porcelain aerial fuses for line wire of 3 mm dia and current of 60 Amps, with brass contact bolts and nuts complete all as specified and directed.

Supplying and fixing/ laying of 40mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all necessary fittings & clamps as required for cable protection etc after taking out existing old unserviceable GI pipe with fittings complete all as specified and directed.

Supplying and fixing/ laying of 50 mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all necessary fittings & clamps as required for cable protection etc after taking out existing old unserviceable GI pipe with fittings complete all as specified and directed.

S&F of 11 kv drop out fuse unit complete all as specified and directed.

M&L for Triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 400 amps complete all as specified and directed.

M&L for hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan after cleaning complete all as specified and directed.

M&L for taking down and refixing of ceiling fan and replcament of cable from ceiling rose or connector to fan after cleaning including painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4.0sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 25mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6.0sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers includig PVC flexible copper cable of 23/0.0076 size, two core for connection complete all as specified & directed.

Supply and fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed.

Supply and fix in replacement of highly efficient LED bulb 10 watt in B-22 capacity complete all as specified & directed.

S&F LED light fitting, 1x9/10 watt, bulk head luminaires, environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon Back-lit LED luminaire comprising of high brightness LEDs with lamp holders, etc complete with all accessories pre-wired with and connecting the same using copper conductor 23/0.0076 flexible twisted twin core cable complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified & directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified & directed.

Supply and fix, 35 watt new generation energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP65 protection and impact resistance of IK07 on bldg wall with and including pipe bracket made out of G.I tubing 32/40 mm dia bore medium grade ISI marked 1.20m long bent to shape & providing clamps 2 Nos made out of 50 x 6mm Flat iron/ MS clamps & 12mm dia bolts, nuts & washers etcand two coat painting of approved colour on brackets completely with and including synthetic enamel paint and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply and fix, 30 watt new generation energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP65 protection and impact resistance of IK07 on bldg wall with and including pipe bracket made out of G.I tubing 32/40 mm dia bore medium grade ISI marked 1.20m long bent to shape & providing clamps 2 Nos made out of 50 x 6mm Flat iron/ MS clamps & 12mm dia bolts, nuts & washers etcand two coat painting of approved colour on brackets completely with and including synthetic enamel paint and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts complete all as specified & directed.

Supply & fix in replacement, double pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB DP of capacity 20 Amps 240 volts complete all as specified & directed.

Supply and fix SPN DB 4 way sheet metal enclosure, IP 43-IK 09 with metal door, 240/ 415 volts with copper bus bar of 200A and neutral bar, earth bar and cable ties for cable management all enclosed on standard steel sheet flush or surface mouting type factory fabricated complete all as specified and directed.

Supply and fix TPN DB 4 way sheet metal enclosure, vertical type, double door with megnetic locking system , IP 43-IK 09 with metal door, 240/ 415 volts with copper bus bar of 200A and neutral bar, earth bar and cable ties for cable management all enclosed on standard steel sheet flush or surface mouting type factory fabricated complete all as specified and directed.

Supply and fix MCB DB SPN 8 way sheet metal enclosure, vertical type, double door with megnetic locking system , IP 43-IK 09 with metal door, 240/ 415 volts with copper bus bar of 200A and neutral bar, earth bar and cable ties for cable management all enclosed on standard steel sheet flush or surface mouting type factory fabricated complete all as specified and directed.

Supply & fix MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fix MCB SP, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fix MCB SPN, 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fix MCB SP, 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fixing of GI pipe bracket suitable for 10/15 W security light fitting made out of 25 mm dia., 0.9 m long and two set of clamp made out of 30x5 mm MS flat and fixed with anchor bolts including taking down old unserviceable bracket complete all as specified & directed.

Supply & fix MCB TPN, 63 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

S&F MCCB 3 pole, 415 V ,with thermal megnetic release, adjustable type 100 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F MCCB 3 pole, 415 V ,with thermal megnetic release, adjustable type 125 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F in repair MCCB 4 pole, 415 V ,with thermal megnetic release, adjustable type 160 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F in repair MCCB 4 pole, 415 V ,with thermal megnetic release, adjustable type 200 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F in repair MCCB 4 pole, 415 V ,with thermal megnetic release, adjustable type 250 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F in repair MCCB 4 pole, 415 V ,with thermal megnetic release, adjustable type 400 Amp with breaking capacity 36 KA including taking down old unserviceable MCCB of any type and capacity complete all as specified and as directed.

S&F Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed.

S&F Detectors Complying with and type certified to EN - 45 Addressable type multisensor detector with heat and smoke combination complete all as specified and directed.

S&F Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500 mtrs range complete all as specified and directed.

S&F ceiling mounted automatic HFC 236 FA clean agent modular fire extinguisher (min capacity 10 kg) complete all as specified and directed.

M&L for replacement of Galvanised steel earth wire 3.15 or 4mm dia complete all as specified and directed.

S&F GI strip 32 mm x 6 mm buried in ground complete all as specified and as directed.

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. , 8mm dia. , 25 mm long hex. head screw complete all as specified and as directed.

S&F of PVC connection with brass adopter screwed at both ends 18" long heavy duty for cold water inlet to geyser of 25 Ltr capacity ISI marked complete all as specified and as directed.

S&F of new valve 11.81" aluminium grip connection with brass adopter screwed at both ends 18" long heavy duty pipe premium quality for the hot water outlet from geyser 25 Ltr of capacity complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to GI earth strip of size 25x4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

M&L Cutting existing steel tubing of 25/32 mm dia of pipe for alterations or additions (Each cut measured) complete all as specified and as directed.

M&L for brick masonary valve pit of size 45x45x45 cm (internal dimension) including all excavation PCC work, earth work and disposal of soil to a distance not exceeding 50 m and depositing where directed by engr-in-charge including plastering internally and pinting to wall externally as work proceeds including MS sheet cover 3.15 mm thick and angle iron frame suitable size handle locking arrangement and painting to steel surface complete all as specified and directed.

M&L for Stay assembly for 20 mm dia of stay rod complete with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and directed.

M&L for Galvanised stay wire stranded 7/2.24mm complete all as specified and directed.

M&L for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and directed.

M&L for Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green Single disc assembly for tension with tension clamps for conductors, working pressure 11000 voltscomplete all as specified and directed.

M&L for replacement of Lightning arresters expulsion type for outdoor use complete with all fittings, transmission class, discharge capacity 65 kilo amp suitable for 11000 volts including bracket, clamps, nuts, bolts, washer and connection of each wire complete all as specified and directed.

M&L for Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed.

M&L for Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

M&L for preparation of painted surface of steel tubular pole of 9 m length including patch work to disturbed surface for smooth finish and painting with two coat of primer including painting of cross arms & FI clamps with two coats of aluminium paint after necessary preparation of steel sections complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply ,installation, testing and commissioning of 03 piston high pressure car washing machine 3HP three phase motor, pressure pipe 25 feet, nozzle etc. complete all as specified and directed.

Supply & fixing of starter for 3 HP three phase motor alongwith connected accessories complete all as specified and directed.

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 60/120 Ltrs complete all as specified and directed.

Supply & fixing of voltage stablizer for automotic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V wuth output stablised at 230 V with accuracy of +/- 2.5 % and capacity of 2.0 KVA complete all as specified and directed.

Supply & fixing aquagaard classic water purifier with intelligent purity sensor ,pre filter and auto shut off (model-classic) complete all as specified and directed.

Supply and fixing of Cable with copper conductor PVC round sheathed (flexible) industrial cable 3 core, 2.5 sqmm for connection of geyser complete all as directed.

Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete with fixing of anchor for hanging ceiling fans and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as directed.

Schedule of credit amount of Rs. 74,708.00 to be deducted during AOC

C L BHATIA (BID ID -3129156)

Tiki Water proofing Co (BID ID -3126820)

JAIDEV SINGH CHADHA (BID ID -3126361)

KISHOR KALAMKAR (BID ID -3131703)