KMC/S_D/PATULI/P1/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Disconnect electrical connection from the motor,keep the cable by covering with protective device and dismantling the motor from its base by removing various types of nuts, bolts & coupling as per instruction of EIC and keep it safe side.

Open out the line shaft by removing the guide channel, Plummer blocks, couplings, bolts etc.Making of barricade and scafolding arround the existing plateform with bamboo/pipe railing on any accident.

Dismantle the complete pump assembly such as Impeller, Impeller shaft, coupling ,bearing, bushes etc. part by part.

Sealing the main incoming & delivery line by making blank flange and other suitable way.

Remetalizing of worn out portion of SS impeller followed by grinding and machining as per specification.

Mfg. supply and fitting fixing of gland bolts as per sample.

Mfg. supply of sleeve bush & sleeve sockets including matching with bearings.

Mfg. supply with fitting fixing of G.M. bushes including machining complete as per sample and perfect match with the impeller housing and stuffing box.

Replacment of damaged bearing (22211E) with new one as per sample from reputed make.

Dynamic balancing of the impeller with impeller shaft and static balancing of motor and intermediate shaft.

Mfg. supply of coupling pin & bush made from carbon steel as per sample.

Supply fitting fixing of special type nuts, bolts & washers to match with the volute, base etc.

Straightening of impeller shaft and line shaft by using hydraulic jack and other suitable tools and tackles to make it perfectly straight.

Removing the sealing materials from the suction and delivery side of the pump unit.

Servicing & overhauling of complete rotating units of pump with cleaning & washing of all the squares thoroughly by slashing oil.

Complete re-fitting the pump with bearings, bearing housing impeller shaft, impeller jam nut and all supplied accessories.

Assembly of the whole pump unit consisting of coupling line shaft, Plummer block base plate, motor pedestal etc.

Lowering the pump units in its own position by engaging necessary tools & tackles.

Commissioning the motor on the pedastal & coupled the motor on pedastal & coupled the motor side coupling & pump side coupling & connect the electric line and trial run unload and load.

Corrosion free black anticorrosive epoxy primer and two coats synthetic enamel paint on pump body .

Transportation charge the whole unit with loading and unloading -2 way from pumping station to work shop and work shop to pumping station for necessary works.

Please Enable Macros to View BoQ information