Loading…
Loading…
Tender Value
₹4.0 L
EMD Value
₹8,000
Closing Date
18 Jun 2026, 4:00 pm
The Superintending Engineer, IWD, IIT(BHU)
The Superintending Engineer, Institute Works Department, IIT(BHU), Varanasi-221005, U.P.
Providing and fixing aluminium partition work in a Classroom at second floor of Faculty Building and Under staircase at ground floor of the Department of Mathematical science, IIT(BHU), Varanasi.
2026_IITBU_911469_1
IIT(BHU)/IWD/CT-27/2026-27/148
Open Tender
Civil Works
90 days
Institute Works Department, IIT(BHU)
As per Tender Document
9 documents required · 9 mandatory
₹0
₹8,000
4 Jun 2026
4 Jun 2026
19 Jun 2026
4 Jun 2026
18 Jun 2026
4 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.1 | Vishwakarma Hostel, IIT (BHU) Varanasi | - | - | - | - |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (13.91) | 42 | sqm | 25.15 | ₹1,056.3 |
| 2 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80) | 5 | sqm | 156.05 | ₹780.25 |
| 3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (13.41.1) | 42 | sqm | 185.65 | ₹7,797.3 |
| 4 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) (13.81.1) | 26 | sqm | 62.7 | ₹1,630.2 |
| 5 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fastners of required dia & size, including necessary filling up the gaps at junctions, i.e. top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately.) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (21.1.1.1) | 505 | kg | 495.05 | ₹2,50,000.25 |
| 6 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or garded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. (21.2.1) | 82 | sqm | 1,139.3 | ₹93,422.6 |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.50 mm thickness (21.3.2) | 27 | sqm | 1,505.25 | ₹40,641.75 |
| 8 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm (9.100.1) | 12 | Nos. | 66.25 | ₹795 |
| 9 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. (21.13) | 7 | Nos | 528.85 | ₹3,701.95 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.29 MB
Tender_Document_for_CT_27.pdf
Tender Documents • 2.27 MB
BOQ_957923.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid