Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Padiabahal of Jumura Block under National Health Mission in the Sambalpur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/029
NBCC/ODISHA/ZO/NHM/NIT/22-23/029
Open Tender-Domestic
Civil Works General
Sambalpur, Odisha
₹11,800
₹2.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation
trenches in hard soil including dressing of
sides and levelling the bed up to the
required depth and depositing the
2 1 excavated materials away from the work Cum 352.65 235.53 83,058.95
site within 50m initial lead & 1.5m initial
lifts with sundries & T&P required for the
work complete including cost of all
labour,labour cess,T&P,sundries etc. as
directed by the Engineer in charge.
Filling in foundation trenches and plinth,
with excavated earth including laying the
earth in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed
as directed by the Engineer-in-charge.
Supplying and filling in foundation and
plinth with good quality river sand including
watering, ramming with cost, conveyances,
4 3 royalties, taxes of all materials and cost of Cum 245.69 848.18 2,08,390.33
all labour with T&P required for the work
etc. complete as per specification &
direction of Engineer-in-charge
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous
chemical barrier under and all-round the
column pits, wall trenches, basement
excavation, top perimeter of building,
expansion joints, over the top surface of
5 4 consolidated earth on which apron is to be Sqm 685.41 162.84 1,11,612.16
laid, surroundings of pipes and conduits etc.
complete as per specifications (plinth area
of the building at ground floor only shall be
measured for payment) including cost of all
materials, labour, T&P etc complete in all
respect and as per direction of the Engineer-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
6 5 agregate 40mm nominal size) as levelling Cum 23.52 5088.28 1,19,676.30
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone
aggregate 12mm nominal size) as levelling
course in foundation and plinth etc.
including tempering, curring, shuttering
etc.complete all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm.
having crushing strength not less than 75
kg. Per. Sqr. Cm. in cement mortar of mix(
1:6) with ordinary Portland slag
cement(PSC) and screened & washed sand
for mortar after immersing the bricks for 6
(Six) hours in water before use in
8 7 Foundation & Plinth including splays cutting, Cum 25.22 5045.09 1,27,237.17
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not
less than 75 kg. Per Sqr. Cm. in cement
mortar of mix (1:6) with approved grade
cement and screened & washed sand for
mortar after immersing the bricks for 6
(Six) hours in water before use in
Superstructure including splays cutting,
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-charge
Half brick work with Fly Ash brick masonry
in cement mortar (1:4) in super structure
having a crushing strength of not less than
75 kg./sqcm with dimensional tolerance ±
2% including splays cutting circular
moulding chamfering and corbelling and
similar such type of works with all
12 11 necessary projections watering and curing 0 0.00 0.00 0.00
after immersing the bricks in water at least
for six hours before use including cost,
conveyance, royalties and taxes of all
materials with all labour,labour cess and T
& P required for the work complete in all
respect as per direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
17 16 b) Column up to plinth Cum 13.08 13373.65 1,74,927.32
19 18 d) Column above plinth Cum 25.07 13373.65 3,35,277.36
26 25 a)Column up to Roof Beam Lvl. Cum 10.54 14929.60 1,57,357.94
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 12 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Providing 16 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Providing 6 mm thick cement plaster with
cement mortar of mix (1:4) with screened
and washed sharp sand for mortar and
finished smooth to R.C.C. work after closed
deep chipping & slurry treatment including
watering and curing, rounding of corners,
providing grooves where ever necessary
with cost, conveyance, royalties of all
materials with cost of all labour,labour cess,
T&P, and scaffolding required for the work
etc. complete in all respect as directed by
the Engineer in charge.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm
thick cement mortar (1:4) (1
42 41 cement : 4 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
44 43 (1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
Ib). laid on 20 mm thick cement mortar
(1:4) (1 cement : 4 course sand) and filling
joints with white cement of approved
quality including cost of all materials, labour
T&P etc. required for the work all complete
as per direction of the Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
48 47 Ib). laid on 12 mm thick cement mortar 0 0.00 0.00 0.00
(1:3) (1 cement : 3 course sand) jointed
with slurry mixed with pigment to match
the shades of the tiles etc. complete
including cost of all materials, labour T&P
etc. required for the work all complete as
per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring in toilets
using Digital matching anti-skid ceramic
floor tile (having minimum thickness 7 mm
to 8 mm & size 300 mm x 300 mm )
confirming to I.S 13755 of approved quility
and shade on 20mm thick ded of cement
morter of mix (1:4) laid in proper slope and
gradient with screened & washed sharp
river sand for mortar and grouted with neat
white cement slurry, joining the anti-skid
ceramic floor tiles with neat white cement
slurry, mixed with required (tiles are to be
immersed in the water for required time
before use) quantities of pigments of
approved marks to match the shades of the
anti-skid ceramic floor tiles if required
including cost, conveyance, loading,
unloading, stacking, royalties of all
material, cost of all labour , sundries, T&P
required for the work , watering,complete in
all respect as per specification excluding
GST aas per specification as directed by
Engineer-in-charge
Supplying, fitting & fixing of 300mm x
600mm Germ free Glaze Ceramic wall tiles
having thickness 6.5mm to 7.0 mm
confirming to IS 13753 in dadoes, skirting
and risers of steps laid on 12 mm thick
cement mortar (1:3) (1 cement : 3 course
sand) jointed with slurry mixed with
pigment to match the shades of the tiles
etc. complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Supplying, fitting & fixing of Chequered tiles
in floors of approved make laid on 20 mm
thick cement mortar (1:4) (1 cement : 4
54 53 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P
etc required for the work all complete as
per direction of the Engineer-in-charge
Providing and fixing seasoned sal wood
work in frames at any locations including
doors, windows,cupboard, clerestory and
other frames fixing in position including
cost of hinges, M.S. flat (30mm x 6mm)
hold fasts lugs or dash fasteners of
required dia and length as per drawing /
specification, at all floors and all heights.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing Factory made
32mm thick flush door, both side laminated
with 1mm mica of Green Ply / Century /
Mayur or equvalent make with seven years
guarantee against termite and borer etc.
complete with wooden hinged cleats
including cost of Aluminium fittings like
Tower Bolt, Handel, Aldrop, Hinges, Screw
etc., with cost conveyance and taxes of all
materials, all labour etc. complete in all
respect as per direction of Engineer-in-
Supplying and fixing of Anodisied 15
microns / Powder coated 50-60 microns
approved colour aluminium 50mm
Casement series door cum fixed Unit with
suitable aluminium extrued profiles. the
system should design to accommadate 5mm
clear Toughen glass 50% and 50% 4MM
ACP. the rate inclusive of hardwares like
60 59 antilift,roller, espag lock cum handle,epdm 0 0.00 0.00 0.00
gaskets, felt along with all accessories etc
complete. the gap between the wall and
window will be filled with silicon weather
sealent in the outer side.Casement Door
Outer frame ( 50*46 mm SERIES) Sash -
78.5 * 58 mm ) + Mullion 66 * 50mm +
Beeding 35.5 *25.5 mm) Make -
WINPLUS+ / ALUPURE / ALUK
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made FRP( Altematly called GRP)
door frame of size 75mm x 100mm
fabricated using E - glass chopped strand
mat (CSM) U.V stabilised inopathalic Gel
coat and impregnated with inopathalic resin
The thickness of the GRP skins shall not be
less then 2.0 mm . The door frame consists
of four segments which are provided with
plug in socket arrrangement in-situ-in
mould. The segments are plugged in and
are joined together by means of srew. The
GRP frame shall be provided with wooden
reinforcement on six locations for high srew
holding capacity for fixing metalic hold fast
and shall be consolidated by filling with
medium density foam / plaster of paris with
fibre reinforcement , six number of 260mm
x 25mm x 5mm size 'S' shaped M.S flat hold
fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-
TIFAC composites Design centre's standards
and specifications . The finish of door frame
will be plain colour white /Ivory/Beige/Light
grey / Golden brown / Mahogany/ Teak
wood /sand stone Champagne/Pastel blue
or any other colour using high quality
pigment complete in all respect as per
specification and direction of the Engineer in
Charge. etc. complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made GIRID FRP or called GRP
sandwich composite door shutter of 32mm
thick laminated with two GRP skin with
good grain finish fabricated using UV
stabilised isoppthalic gel coat and one layer
of 450 gsm E-glass chopped strand mat
(CSM) impregnated with ortopathilic resin
The thickness of the skins shall not be less
than 1.50mm . Expanded polysryne ( EPS)
structural foam panel of 29 mm tickness
and a density of 20kg/cu.mts shall be used
as core material wooden reinforcements
made of sesasoned sal wood block of cross
section not less than 28mm x 32mm and
64 63 also necessary sal wood reinforcements for 0 0.00 0.00 0.00
fitting the metal fittings such as lower bolts
,aldrops, handles etc. shall be provided . A
structural adhesive compatible with
(EPS)foam shall be used for bending the
core material. the sal wood reinforcements
and the skin The material and process for
manufactuing te door shutter shall conform
to RV -TIFAC components design centre's
standards and specification and the door
shutters tested in conformation to IS 4020-
1998. The Finish of door shutter will be
plain colour as per specification and
direction of the Engineer in Charge. etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2.5 track
KOMMERLING uPVC white colour sliding
window with bugmesh comprising of uPVC
multi-chambered frame having section
Frame 88mm x 49mm, Window sash:
37mm x 61mm, Bugmesh sash: 58mm x
32mm made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5 mm. The windows
profile should fulfill the requirements of
Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and
66 65 Modulus of Elasticity should be tested in 0 0.00 0.00 0.00
accordance with ASTM/DIN-ISO standards
and the thermal conductivity as per IS
standards. The window comprising of uPVC
extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100
x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and
necessary stainless steel screws etc. After
fixing frame the gap between frame and
adjacent finished wall shall be filled with
weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( Toughen ). Make -
KOMMERLING / FENESTA / RIHAU
Supplying, fitting & fixing in all floors of
M.S. grills, grill gates, M.S. gates, garage
door, collapsible gates with top and bottom
rails, steel windows, critical frames for
windows, stair case and parapet railing
made out of M.S Square bar/ flat including
stair case hand railing with 40mm. dia
G.I.pipe etc. including painting two coats
over a coat of redoxide primer as per
approved drawing and design with cost of
all materials & labour, taxes, labour cess,
T&P, sundries etc. complete in all respect as
per specification & direction of the Engineer-
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance,
taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per
the direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-
fungal weather seal paints (ISI) of approved
colour, shade on wall surface over a coat of
wall primer(ISI) water bound including sand
75 74 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete
as per specification & direction of Engineer-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to
receive painting in walls, at all heights with
staging wherever necessary with cost,
conveyance, taxes of all materials, cost of
all labour,labourcess, all T&P etc. required
for the work complete in all respect as per
the direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside
surface of walls finished with Acrylic Wall
putty (water based) of make (Birla / JK)
and finished smooth & even surface to
81 80 receive painting using roller to the final coat 0 0.00 0.00 0.00
including cost of scaffolding staging charges
with cost, conveyances, taxes of all
materials, cost of labour, T&P required for
the work etc. complete for all floors as per
specification & direction of the Engineer-in-
Painting two coat with approved synthetic
enamel paint to new wood work over a coat
of Red oxide primer including cost,
conveyances, royalties, taxes of all
materials and cost of all labour with T&P
required for the work etc. complete as per
specification & direction of Engineer in
Painting two coats to new Iron work with
approved enamel paints of approved colour,
shade including sand papering, polishing
86 85 the surface, cost, conveyances, taxes of all 0 0.00 0.00 0.00
materials and cost of all labour,labour cess
with T&P etc, complete as per specification
& direction of Engineer-in-charge.
88 87 Terrace floor Sqm 4.34 173.22 751.79
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless
steel of 304 grade in hand railing using
50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @
0.90mtr. C/C and stainless square pipe
bracing of size 32mm x 32mm x 2mm in 3
rows in stair case as per approved design
and specification, buffing, polishing etc with
cost, conveyance of all materials, cost of all
labour,labour cess, T&P etc. required for the
work complete in all respect as per direction
of the Engineer-in-charge.
Providing 2.5cm thick Grading Concrete
over roof slab with cement concrete (1:2:2)
using 6.7mm size black hard granite
crusher broken chips and screened &
washed sharp sand for mortar and finished
smooth to the rough surface of slab
including watering and curing with cost,
conveyance, royalties and taxes of all
materials with cost of all labour, labour cess
and T&P required for the work etc. complete
in all respect as directed by the Engineer in
93 0 Sub-Total of Civil Works 0 0.00 0.00 1,38,84,203.79
94 1 Plumbing Works 0 0.00 0.00 0.00
95 2 INTERNAL PH WORK 0 0.00 0.00 0.00
Providing all materials, labour, T&P for
fitting and fixing white glazed vitreous china
water closet (European pattern) with seat
cover (solid) and Cistern of approved make
in all floor including supply of sutaible
96 3 bracket, PVC wall plug and Brass screws NOS 9.00 6070.86 54,637.78
etc. all complete including cost, taxes and
conveyance as per specification all complete
as per direction of Engineer-in-charge.
Make:HINDWARE/PARRYWARE/CERA.
(As per Cat no. WHT-551 of Jaquar)
Supply all materials and labour for fitting
and fixing of following size white glazed
vitreous china Under counter wash hand
basin of approved make in all floor of
approved quality including cutting the walls
& floor and making good the damages with
97 4 cement concrete etc. including all taxes, NOS 10.00 5449.83 54,498.30
duties, transportation etc. all complete as
per direction of EIC.
(Make:JAQUAR/HINDWARE/PARRYWARE/CE
Cat no. FLS-WHT-5701 of Jaquar)
Supplying all materials, labour, T&P and
fixing with labour ,T&P as per specification ,
the following Brass/ CP (Hindware) / G.M.
98 5 fittings at appropriate locations to thr pipe 0 0.00 0.00 0.00
lines at all floors and at all heights, of
approved make confirming to relevent IS
specification . etc complete in all respect.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Health Faucet ABS SS braided hose 1.2 m
with CP hook.
(As per Cat no.ALD-579 of Jaquar)
(Make: Jaquar/Hindware)
Two-way Bibcock with wall Flange.
100 7 (As per Cat no.FLR-5041N of Jaquar) 0 0.00 0.00 0.00
(Make: Jaquar/Hindware)
15mm dia pillar cock .
(As per jaquar Cat No- FLR-5011N)
15mm dia Angle Stop cock with Wall Flange.
103 10 (As per Cat no. FLR-5053N of Jaquar) NOS 21.00 1768.82 37,145.22
(Make: Jaquar/Hindware)
15mm dia Concealed Stop cock with Wall
(As per Cat no. F200008 of Hindware)
( Make: Hindware/Jaquar )
Providing and fixing 700x500 mm beveled
edge mirror of superior
glass (of approved quality) complete with 6
mm thick hard board
ground fixed to wooden cleats with C.P.
brass screws and washers
(As per Cat no.-Jaquar of Make-B3510106).
106 13 Rectangular shape 700x500 mm NOS 10.00 1835.49 18,354.90
C.P. Soap Dish holder.
(As per Cat no.ACN-1177N of Jaquar)
Bib cock with wall Flange.
(As per Cat no.FLR-5047N of Jaquar)
32 mm C.P. Bottle Trap 32mm with 250 &
190 mm Long Wall Connection pipe & wall
(As per Cat no.-ALD-769L250X190 of
(Make: Jaquar/Hindware)
32mm dia C.P.waste coupling 32mm SS
(Full Threaded)
(As per Cat no.ALD-705 of Jaquar)
(Make: Jaquar/Hindware)
Providing and fixing PTMT towel rail 600
mm long complete with brackets fixed to
wooden cleats with CP brass screws with
111 18 concealed fittings arrangement of approved NOS 1.00 1461.08 1,461.08
per Cat no.jaquar-AQN-7711B)
(Make: Jaquar/Hindware)
Providing and fixing towel ring 178 mm dia
with brackets fixed to wooden cleats with
112 19 CP brass screws with concealed fittings No. 5.00 2047.30 10,236.50
arrangement of approved quality.
(As per Cat no.jaquar AQN-7721)
Overhead shower 120 mm Round shape
Multi Flow(ABS body crome plated with
113 20 Gray Face Plate)with Rubit Cleaning NOS 1.00 4351.90 4,351.90
System. (As per Cat no.OHS-1799 of
Shower Arm Casted 190mm Long flat shape
for Wall mounted Showers with flange.
Bath Spout with wall Flange.
(As per Cat no.F360009 of Hindware)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Stainless Steel Double
Bowl Sink withDrain Board Undermount -
Matt Finish (47” L x 19” W x 8” D)
(Parryware, Cat no.-C856799 with C.I.
brackets and stainless steel plug 40 mm,
116 23 including painting of fittings and brackets, 0 0.00 0.00 0.00
cutting and making good the walls wherever
Providing 15 mm dia Sink cock of Hindware
having cat no - F110021, including painting
of fittings and brackets, cutting and making
good the walls wherever required :
Fitting and fixing Water purifier for drinking
purpose (with rate of recovery 60-65%)
119 26 purifier water, water inlet and drain out NOS 2.00 17700.00 35,400.00
connections complete in all respects similar
Floor drain 160x160 mm dia stainless steel
Supplying all materials, labour & T&P for
fitting and fixing of following sizes of white
glazed vitreous china flat back half stall
urinal basin confirming to specification of
approved make as per IS-2556 with ISI
mark in all floor along with supply & fixing
of necessary component parts like pair of
121 28 C.I./M.S. bracket including connection from 0 0.00 0.00 0.00
water supply pipe with all taxes, duties,
transportation etc. all complete as per
specification & direction of the Engineer-in-
(Make:JAQUAR/HINDWARE/PARRYWARE/CE
RA) (As per Cat
no.- URS-WHT-13263 Jaquar)
122 29 Flat back half stall urinal . (male urinal) Set 2.00 14505.50 29,011.01
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes IS 15778,SDR-13.50
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting
chases and making good the same including
testing of joints complete as per direction of
Engineer in Charge.
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings This includes jointing of pipes &
130 37 fittings with one step CPVC solvent cement, 0 0.00 0.00 0.00
trenching, refilling & testing of joints
complete as per direction of Engineer in
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
131 38 40 mm nominal outer dia Pipes meter 25.00 936.33 23,408.25
Supply, Fixing, jointing, testing and
commissioning of uPVC SWR pipe type B
(SWR) pipes(SCH-80) for Soil - waste &
132 39 Kitchen waste pipe cut to required lengths 0 0.00 0.00 0.00
including all necessary fittings and specials
such as bends, junctions offsets, access
Supplying all materials,labour and T&P for
fitting and fixing of following dia UPVC (SCH-
80) Rain water pipes and fittings along with
fixing to wall complete in all respect.
Providing, laying and jointing PVC SWR soil,
waste and vent pipes under floor
/suspended under ceiling / fixed on the wall
face conforming to IS:15905-2011 , ISO-
6594 Includes necessary fittings like (plain
or door)tees, bends, collars, crosses
reducers, Y, etc, of approved make, drip
seal joint, suspended under ceiling /
embedded in floor. Includes making
connection with sanitary fittings,of
approved make etc all complete .(As per
Supreme/Kishan etc)
145 52 100mm Single Branch Door Tee Nos. 5.00 338.66 1,693.30
146 53 75mm Single Branch Door Tee Nos. 4.00 192.34 769.36
147 54 100 mm Single Branch Plain "Y" 45 D Nos. 3.00 357.54 1,072.62
148 55 75 mm Single Branch Plain "Y" 45 D Nos. 5.00 185.26 926.30
149 56 100mm Double Branch Plain 'Y' 45D Nos. 5.00 336.30 1,681.50
150 57 100mm Single Branch Door 'Y' 45D Nos. 10.00 575.84 5,758.40
155 62 75 mm Pipe Wall Clamp Nos. 8.00 27.14 217.12
156 63 100 mm Pipe Wall Clamp Nos. 16.00 38.35 613.60
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, fixing, jointing and testing PP
mineral filled low noise level Soil & Waste
piping system as per BS EN 1451, SN4-S16,
with minimum density for pipes and fittings
1.4 gm/cm3. Pipes and fittings made from
Polypropylene-M (mineral reinforced) and
available from 50 – 160 mm with push fit
SBR type rubber ring sockets for easy
installation. Pipes should have 3 layer
design. Should have hot water resistance up
95ºC for short term loading (90ºC for long
term loading). Piping system should have
chemical resistance of pH 2-12. Fittings
should have swept design from 75-160mm
and depth gauge for proper fittings against
157 64 thermal expansion and contraction, should 0 0.00 0.00 0.00
have top marking at every 15° intervals in
angular rotation for better alignment. Piping
system includes all required fittings &
accessories such as coupler, bend, tee, Y,
reducer, access pipe, multi floor traps,
Nahni trap with extension piece etc. for
conveying soil, waste & rainwater purpose
in floors, ceiling suspended, or on walls,
with leak proof joints etc. Setting the pipe
in 1:2:4 CC in case of concealed plumbing,
wall chasing, holes, supporting, clamping,
covering back with chicken mesh & plaster
and making the wall good as per approved
shop drawing. Testing as per tender
specifications/EIC.
Providing all materials, labour, T&P for
fitting & fixing of following Bronze Ball
Valves confirming to IS-778 with ISI mark
in all floor & fixing with the pipes after
cutting the pipes to required shape & size
159 66 including wastage etc. of following nominal 0 0.00 0.00 0.00
diameter, all complete including testing the
joints with required water pressure.The cost
inclusive of all taxes,duties,transportation
scaffolding etc. all complete as per
specification and direction of Engineer-in-
Providing all materials labour, T&P for
making grooves in bricks/stone masonary
walls vertically or horizontally up to
required depth and width in all floor for
laying of pipes and fittings up to 50mm dia,
testing the joints with required water
162 69 pressure and making good the damages Mtr. 40.00 187.97 7,518.96
with cement concrete 1:2:4 with 12mm size
h.g.c.b.chips and finished smooth with
cement morter (1:4) to original shape
including cost of materials, curing,
conveyance, taxes of all materials etc. all
complete as per specification & direction of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing all labour,T&P for cutting holes in
bricks or stone masonry wall for taking
pipes in all floors and making good the
damages with cement concrete 1:2:4
163 70 finished smooth with CP 1:4 to original 0 0.00 0.00 0.00
shape including cost of all materials, curing,
conveyance, taxes, duties etc. all complete
as per specification & direction of Engineer-
For 25mm to 110mm dia pipe to pass in
250mm thick wall
Providing all labour,T&P and cutting holes in
RCC chajja/roof/floor for taking pipes
through and making good the damages with
supply of all required materials etc.
complete as per the direction of the
Engineer-in-charge.
166 73 Square Gully trap 110mm (IP) No. 7.00 807.12 5,649.84
EXTERNAL PH WORKS (WATER SUPPLY)
Excavating trenches of required width for
pipes, cables, etc including excavation for
sockets, and dressing of sides, ramming of
bottoms, depth upto 1.5 m, including
getting out the excavated soil, and then
168 75 returning the soil as required, in layers not 0 0.00 0.00 0.00
exceeding 20 cm in depth, including
consolidating each deposited layer by
ramming, watering, etc. and disposing of
surplus excavated soil as directed, within a
lead of 50 m : All kinds of soil
Pipes, cables etc, not exceeding 80 mm dia.
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability cold water supply including all
CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one
170 77 step CPVC solvent cement & testing of 0 0.00 0.00 0.00
joints complete as per direction of Engineer
Make:SUPREME/ASHRIVAD.
Supply installation, Testing &
Commissioning of Horizontal Multi Stage
Monoblock Centrifugal pumps with CI with
CED Coated Suction & Discharge Casing, SS
Intermediate Casing. Pump shoule come
with 380-415V, 50Hz, 2 Pole, IP 55
Enclosure Class, Class F insulated 0.6 KW
(0.8 HP) Motor.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Pump controller suitable for 2 Pumps
(1W+1S) with LCD screen displays, phase
loss protection (incoiming as well as for
outgoing), Individual pump overload
protection, individual pump under voltage
protection, dryrunning protection without
installing any float switch, memory function
173 80 when power off and during recovery, visual 0 0.00 0.00 0.00
and audio alarm for fault prompt, auto
manual switch and pump should operate
based on the sump water level and both
pump should run together for high level.
Panel should come with 3 Nos Float switch
to work as per the OHT water level.(Make-
grundfos,kirloskar,luby or equivalent )
174 81 Per Pump Flow Rate-5 M3/hr (1W+1S) 0 0.00 0.00 0.00
Construction of 1 nos production well
including scientific source finding through
consolidated and unconsolidated rock with
down the ODEX drilling rig with PVC, GI, MS
pipe and installation of submersible pump
set with all accessories.
Labour for drilling a perfectly vertical bore
hole of specified dia for a specified depth
below ground level through consolidated
and unconsolidated rock with combination
drilling rig as required to suit the site
condition as per the direction of Engineer-in-
charge including supply of own rig with its
accessories, tools and plant and
consumables etc. for lowering of 200mm
/150mm dia M.S. Pipe / PVC casing fitted
181 88 with socket and with or without well screen 0 0.00 0.00 0.00
as per the necessity for sub-medium hard
and boulder formation (M.S./PVC casing
pipe if required to prevent collapse of over
burden is to be provided by contractor
including lowering and withdrawing after
completion of the tube well) 200mm dia x
400mm dia in over burden position
inlcluding packing of gravel supplied by
Contractor for 400mm bore only etc as per
direction of Engineer incharge.
182 89 Drilling for 200mm dia bore 0 0.00 0.00 0.00
185 92 Drilling for 200mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I. / PVC /
M.S. housing pipe with or without slotted
pipe as per the necessity for ground level
upto 45 mtr depth and fitted and fixed up
perfectly vertical position including cutting
187 94 and threading of pipes and slotted pipes and 0 0.00 0.00 0.00
supplying and fixing all jointing materials,
tools and plants etc all complete and
keeping the top of the casing pipe threaded
including plugging tube wells to prevent
entry of foreign materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Lowering 200mm dia M.S.ERW pipe casing
cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge in obtained from the
tube well including supply and use of all
necessary equipment and labour as per
direction of Engineer-in-charge.
Supplying all labour, materials and T&P for
providing sanitary sealing by cement
concrete grouting of annular space around
193 100 M.S. casing pipe uptp 5 mtr below groun No. 1.00 1902.11 1,902.11
dlevel to plug the bore hole excluding cost
of cement etc all complete as per direction
194 101 Borewell Submersible Pump 0 0.00 0.00 0.00
Supply, installation & commissioning of
submersible borewell pump (4 Inch Dia).
Pump should be with all SS 304 ( (Pump
casing, Impellers, Shaft all other parts))
195 102 material of construction (Caste Iron Pumps 0 0.00 0.00 0.00
are not acceptable) with 380-415V, 50 Hz 2
Pole. 2.2 KW (2 HP) high efficiency class
motor. Pump hydraulic efficiency should not
be less than 65%.
Pump controller suitable for 1 Pump with
LCD screen displays, phase loss protection
(incoiming as well as for outgoing),
Individual pump overload protection,
individual pump under voltage protection,
dryrunning protection without installing any
float switch, memory function when power
off and during recovery, visual and audio
alarm for fault prompt, auto manual switch
and pump should operate based on the UGT
water level . Panel should come with 1 Nos
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability cold water supply including all
CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one
198 105 step CPVC solvent cement & testing of 0 0.00 0.00 0.00
joints complete as per direction of Engineer
Make:SUPREME/ASHRIVAD.
15 KLD DRINKING WATER UGR TANK AND
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5
m in width as well as 10 sqm on plan)
including getting out and disposal of
201 108 excavated earth lead upto 50 m and lift 0 0.00 0.00 0.00
upto 1.5 m, as directed by Engineer-
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
204 111 exceeding 15cm in depth: consolidating CUM 18.77 130.86 2,456.02
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Brick work with non modular fly ash lime
bricks (FALG Bricks) conforming to
206 113 IS:12894, class designation 10 average 0 0.00 0.00 0.00
compressive strength in super structure
above plinth level up to floor V level in :
Cement mortar 1:6 (1 cement : 6 Coarse
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Providing and applying two component high
performance polymer modifed cementitious
waterproofing coating, Dr.Fixit Fastflex of
Pidilite or approved equivalent having
minimum elongation of 120% , shore A
hardness of 60 as per ASTM D 2240 and
food grade certification by CFTRI applied
@2Kg/sqm in two coats, including
reinforcing the coating with 45gsm glass
fibre mesh between the coats at all corners
and change in directions. The coating shall
be applied on the entire horizontal and
300mm above the FFL on the vertical
surface as per manufacturer's
215 122 recommendation. The system includes base SQM 34.72 601.80 20,895.10
preparation of cleaning, brushing and
removal of flacky materials, grouting the
porous area with cementitious grout,
sealing the minor cracks, proper coving
between slab and wall junctions and pre-
wetting the surface to attain SSD condition
before application of the waterproofing
coating, followed by the application of
waterproof coating. The waterproofing
system should be applied directly by the
manufacturer with 10 years of insurance
backed system warranty against leakage.
Mode of measurement will be actual area
12mm thick cement plaster (1 : 4) over
216 123 brick work with cement punning . in Ground SQM 39.00 202.49 7,897.03
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
217 124 cement : 6 fine sand) including necessary SQM 21.05 247.92 5,218.67
scaffolding, curing etc. all complete at all
floors and all heights.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
218 125 cement : 6 fine sand) including necessary SQM 25.45 174.05 4,429.14
scaffolding, curing etc. all complete at all
floors and all heights.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
220 127 cost,conveyance of all kg 96.24 141.60 13,628.12
materials,priming,and labour for fitting
fixing etc.complete as per the instruction of
Engineer-in-Charge
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as
per direction of Engineer-in-charge.
M.S Panneled Door single leaf shutter with
222 129 M.S frame including frame made out of M.S kg 42.53 141.60 6,021.54
angle and panel shutter with C.R sheet
Providing & Applying priming coat with
Cement primer of approved brand and
manufacture on plaster surface as per the
instruction of Engineer-In-Charge at all
elevations including all material & labour
Providing and applying to outside walls with
two or more coats of Anti-Fungal Weather
coat water proofing paint including
scaffolding and cleaning the surface before
application of approved colour and
manufacture as per specification, instruction
of Engineer-In-Charge at all elevations
including all material labour complete.
Preparing surface and painting at all height
with two or more coats of interior Plastic
Emulsion "Royale Shyne" of Asian Paints or
equivalent of approved shade as per the
instructions of the manufacturers; giving
225 132 uniform shade etc in all heights of walls sqm 29.80 96.05 2,862.35
etc. including interior wall primer &
providing scaffolding, cleaning, curing and
supply of all materials and labour complete
as per drawing, design and direction of
Architect/Engineer-In-Charge.
Providing & Painting with synthetic enamel
paint of approved brand Asian / Berger
make (Apex Ultima quality) and
226 133 manufacture on concrete /Steel work (Grill sqm 2.21 168.98 373.86
and Gate) as per the instruction of Engineer-
In-Charge at all elevations including all
material & labour complete.
2.5 cm thick grading concrete (1:2:2) on
227 134 roof slab with 6.7mm & down grades size sqm 8.75 358.60 3,137.77
hard granite crusher broken chips
228 135 CIVIL WORKS OF 13 KLD SEPTIC TANK 0 0.00 0.00 0.00
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
229 136 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
232 139 exceeding 15cm in depth: consolidating CUM 24.55 130.86 3,212.20
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling in plinth with sand
under floors, including watering, ramming,
consolidating and dressing complete.
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded
stone aggregate 40 mm nominal size
derived from natural sources)
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Providing and applying two component high
performance polymer modifed cementitious
waterproofing coating, Dr.Fixit Fastflex of
Pidilite or approved equivalent having
minimum elongation of 120% , shore A
hardness of 60 as per ASTM D 2240 and
food grade certification by CFTRI applied
@2Kg/sqm in two coats, including
reinforcing the coating with 45gsm glass
fibre mesh between the coats at all corners
and change in directions. The coating shall
be applied on the entire horizontal and
300mm above the FFL on the vertical
surface as per manufacturer's
240 147 recommendation. The system includes base SQM 20.20 601.80 12,156.36
preparation of cleaning, brushing and
removal of flacky materials, grouting the
porous area with cementitious grout,
sealing the minor cracks, proper coving
between slab and wall junctions and pre-
wetting the surface to attain SSD condition
before application of the waterproofing
coating, followed by the application of
waterproof coating. The waterproofing
system should be applied directly by the
manufacturer with 10 years of insurance
backed system warranty against leakage.
Mode of measurement will be actual area
241 148 12 mm cement plaster of mix : 0 0.00 0.00 0.00
243 150 Neat cement punning. SQM 55.28 80.00 4,422.62
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as
per direction of Engineer-in-charge.
2.5 cm thick grading concrete (1:2:2) on
245 152 roof slab with 6.7mm & down grades size sqm 16.26 358.60 5,829.43
hard granite crusher broken chips
INSPECTION CHAMBER (750X750X750) MM
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
247 154 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
249 156 exceeding 15cm in depth: consolidating CUM 12.82 130.86 1,678.20
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
257 164 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
259 166 Neat cement punning. SQM 10.00 27.38 273.76
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
GULLY CHAMBER(250X250X250)MM IN 5
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
262 169 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
264 171 exceeding 15cm in depth: consolidating CUM 2.23 130.86 291.75
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
272 179 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
274 181 Neat cement punning. SQM 5.00 27.38 136.88
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
construction man hole chamber of the
following size with cement concrete(1:3:6)
using 40mm size hard granite metal on bed,
1st class Fly ash brickwork in cement
mortar(1:6), moulding and shaping the
channel inside and benching with cement
concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing
(1:3) to outside, R.C.C cover slab in
(1:1½:3) using 12mm size h.g chips with
RCPC man hole cover, earthwork in
excavation in all kinds of soil and refilling
the cavity around the chamber including
watering, curing, conveyance of all
materials to worksite, payment of royalty,
taxes etc all complete as per approved
specification and direction of the Engineer in
279 186 SEWERAGE PIPE LINE TRENCH 0 0.00 0.00 0.00
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
280 187 plan), including dressing of sides and cum 35.00 235.53 8,243.48
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Providing and laying in position cement
concrete of specified grade excluding the
cost of centering and shuttering - All work
up to plinth level :
1:4:8 (1 Cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
284 191 Sand filling in drain trench cum 3.00 848.18 2,544.55
Supplying and filling in for CC lining 75 mm
all arround on PVC pipes and base along
285 192 with Jamuna sand under floors, including cum 3.70 884.17 3,274.54
watering, ramming, consolidating and
dressing complete.
286 0 Sub-Total of Plumbing Works 0 0.00 0.00 28,83,669.51
287 0 Electrical Works 0 0.00 0.00 0.00
288 1 Sub-Head I (modular Wiring Items) 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked Make-
AKG/Anchor/Havells or equievalant reputed
make A catagory ISI marked as approved
6A modular type (anti bactorial & flame
retradant type) switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, and ceiling rose ISI marked
Make- Anchor/Havells of modular type G.I
box with metallic cover plate (both side)
(anti bactorial & flame retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved of suitable size, modular box with
1.5 sq. Mm FRLSH PVC insulated single
core multistandard copper conductor as
earth wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital. All the
switches & sockets should be warrantied for
a replacement period of 2 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
290 3 department for genuinity of product & to
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring
to light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLSH/LSZH
PVC insulated copper conductor of ISI
Make- Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm
dia PVC flexible non metallic conduit FRLS
type ISI marked Make-AKG/Anchor/Kinjal
or equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or
equievalant reputed make & model A
catagory ISI marked as approved of
modular type G.I box with metallic cover
plate (both side)(anti bactorial & falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single
core multistandard copper conductor as
earth wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
Supplyingfor IPH standard
,fixing of 6A Plug on the same
board in existing switch board with
complete fitting by 01 no of 6A switch &
socket (modular type)( (anti bactorial &
flame retradant type)) & other required
accessories of ISI marked as approved as
per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, complete suitable for IPH
standard hospital.(Maximum 02 nos point in
one circuit).All the switches & sockets
should be warrantied for a replacement
period of 2 years against defects with
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
bactorial & falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of
engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant make &
model ISI marked as approved , complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01
no of 16A switch & socket(modular
type)((anti bactorial & flame retradant
type)) with suitable size modular box &
cover(anti bactorial & falme retradant type)
including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved,
(For equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+2 no 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, (For equipement power)complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 3x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+3 nos 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, (For equipement power)complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring
with the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved,
in recessed PVC conduit Heavy duty FRLS
299 12 of mentioned size (AKG/Anchor/Kinjal or 0 0.00 0.00 0.00
equievalant ISI marked as approved) as
required as per direction of Engg.-in-
Charge. Ncessary test report & Warrnaty
certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
continuty conductor. In 20 mm dia non
metallic heavy duty flexible conduit (LDB to
LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
301 14 continuty conductor in 20 mm dia non Mtr 266.00 171.10 45,512.60
metallic heavy duty flexible conduit.(BDB
to LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire
for phase and neutral and 02 nos of single
core 2.5 sq. mm copper wire for earth
continuty conductor .in 25 mm dia non
metallic heavy duty flexible conduit(LDB to
LSB/5A SOCKET) (4X2.5+2X2.5)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
304 17 conductor in 32 mm dia non metallic heavy Mtr 34.00 289.10 9,829.40
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR
PANEL TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2
pole and earth metal enclosed plug top
along with 32 amps. C-series, SP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
as required as per direction of Engg.-in-
Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A
catagory ISI marked as approved,All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts,
TPN, industrial type socket outlet, with 4
pole and earth metal enclosed plug top
along with 32 amps. C-series, TP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
as required as per direction of Engg.-in-
Charge.. . Equievalant higher model of
Legrand/Schneider/Siemens/panasonic
equievalant reputed make & model A
catagory ISI marked as approved.All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/
modules, GI box along with modular base &
metallic cover plate (both side)(anti
bactorial type) plate for modular switches in
recess etc as required as per direction of
Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved
.All the Components should be warrantied
for a replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good
315 28 the same in case of recessed conduit as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge
.MAKE KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
as required as per direction of Engg.-in-
318 31 Charge.All the Components should be Nos 12.00 126.26 1,515.12
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
coil voltage-415 Volt A.C. & O/L range of 9-
14A range on mod Box of suitable size
including modular coveras required as per
direction of Engg.-in-Charge .All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
.as required as per direction of Engg.-in-
320 33 Charge.All the Components should be Nos 3.00 241.90 725.70
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant
type)) in existing switch box(anti bactorial
& flame retradant type) including supplying
of all required accessories of ISI marked
as approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision), complete
suitable for IPH standard hospital.It should
be warrantied for a period of 10 years
against manufacturing defects against
which ncessary test report & Warrnaty
certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
323 36 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Usha
324 37 or equievalant reputed make & model A Nos 8.00 3683.96 29,471.68
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of
heavy duty 380 mm sweep 1400 rpm with
louvers Make-Equievalant higher model with
5 star rated of
Havells/almonard/Anchor/Panasonic/Usha
325 38 or equievalant reputed make & model A Nos 5.00 4334.14 21,670.70
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection .as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Usha
or equievalant reputed make & model A
326 39 catagory ISI marked as approved ) Nos 10.00 2607.80 26,078.00
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required.(With fan Regulator)
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A
catagory ISI marked as approved )
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in-Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy
efficient Recess mounted LED luminaire
made up of CRCA powder coated sheet
steel housing of 595 X 595 mm x 70 mm
size with of not more than 25W and system
lumens output not less than 3250 lumens
(130 lm/ wt) with diffusers for better light
transmission and pure effect with High
luminous flux LEDs for better light output,
CRI not less than 80, CCT of 5700-6500
degree K, THD less than 10%,internal
surge protection of 3 KV, complete with
328 41 Non integrated isolated electronic driver No 16.00 3158.86 50,541.76
(protects the output /secondary side from
any disturbance on the input / primary side
ensuring safe operation)and all other
accessories suitable for operation on140-
270 V, 50 Hz ,L70 @50,000 burning hrs (5
years warranty)supply .as required as per
direction of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A
catagory ISI marked as approved.) . The
luminaire must be Replacement Warranty
will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy
efficient recessed mounted LED luminaire
made up of CRCA powder coated housing,
Top opening clean room LED luminaire of
600 X 600 x 65 mm size with of 45 W and
system lumens output not less than 4500
lumens , IP65 ,dust free & zero
maintenance , anti glare high
transmittance PMMA diffuser , operating
volatge range 150-265 V, high performance
potentiometric electronic driver for zero
maintenance , 2.5 KV internal urge
protection, L70 B 50: 50,000 hrs., CRI not
less than 80, CCT of 5700-6500 degree K,
THD less than 10%,,IP 65 protection
complete with all other accessories suitable
for operation on 230 V, 50 Hz supply as
required as per direction of Engg.-in-
Charge. (Make:Panasonic /PHILIPS/ Wipro
or equievalant reputed make & model A
catagory ISI marked as approved ) .The
luminaire should be Replacement Warranty
will be 5 years. .Each CLEAN ROOM FITTING
FOR OT ICU MRI CT.
Supplying and fixing of Energy
efficient surface mounted square shape 20
W LED luminaire of dimension of 225x 225
x 35 mm consists of white powder coated ,
die-cast Alluminium housing with high
quality frosted diffuser for glare-free
uniform lighting distribution with wattage
not more than 20 watt and lumen output of
1500 lumens, , CRI not less than 80,CCT of
6000 degree K,THD less than 10%, with
electronic driver, internal surge protection
of 2.5 KV , L70 B50: 30000 hrs (2 yrs
warranty) and all other accessories suitable
for operation on 220 V to 240 V supply as
required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI
marked as approved).The luminaire should
be Replacement Warranty will be 5 years
Supplying and fixing of Energy
efficient recess mounted LED luminaire with
white powder coated ,pressure die-cast Al
housing ,with high transmititivity,non-
yellowing PMMA diffuser, with wattage not
more than 20 watt and lumen output not
less than 2600 Lumen ( 130 lumens/watt )
of size 595 x595 x 70 mm , ,CRI not less
than 80,CCT of 5700-6500 degree K,THD
less than 10%, with Non integrated isolated
driver (protects the output /secondary side
from any disturbance on the input / primary
side ensuring safe operation), all other
accessories , life : 50,000 burning hours (5
years warranty) , Internal surge protection
of 3 KV suitable for operation on 230 V, 50
Hz supply as required as per direction of
Engg.-in-Charge. ( Make : Panasonic / LT
/Wipro/PHILIPS or equievalant reputed
make & model A catagory ISI marked as
approved.) The luminaire should be
Replacement Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
SITC of energy efficient LED tube light
fittings with decorative alluminium batten
and LED tube light having power rating not
more than 20 watt and lumen output not
less than 2200 lumen complete with
electronic driver and all other accessories
332 45 with diffuser having 5 years warranty i/c Nos 12.00 940.46 11,285.52
connection etc as required as per direction
of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/wipro or equievalant
reputed make & model A catagory ISI
marked as approved.). The luminaire should
be Replacement Warranty will be 5 years .
SITC of Sleek LED 10 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
333 46 insulated, copper conductor, single core Nos 6.00 863.76 5,182.56
cable and earthing etc. as required as per
direction of Engg.-in-Charge.
( Make : WIPRO / PHILIPS/Panasonic or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver
extra as required as per direction of Engg.-
334 47 in-Charge ( Make : Panasonic Nos 2.00 1792.42 3,584.84
PHILIPS/Wipro or equievalant reputed make
& model A catagory ISI marked as
approved. )The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of small focus light for
small monuments as 30W , 5700 K
required as per direction of Engg.-in-Charge
Make : Panasonic/PHILIPS/LT/WIPRO or
equievalant reputed make & model A
catagory ISI marked as approved.)The
luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
337 50 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral,
sheet steel,double door MCB distribution
board, 415 volts/240 volts shall be as per
IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
pre-treated with 7 tank process and duly
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar,
neutral busbar, earth bar, din bar. Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved. as per
direction of Engg.-in-Charge. The
Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
339 52 with neutral Bus bar, Earth Bar & Cable ties Nos 2.00 2558.24 5,116.48
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
340 53 interconnections, phosphatized and powder Nos 3.00 2249.08 6,747.24
painted including earthing etc. as required
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT
LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
341 54 door)(only each EM. CONNECTION UPS Nos 2.00 1926.94 3,853.88
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
with neutral Bus bar, Earth Bar & Cable ties
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI
marked as approved in the existing MCB DB
complete with connections as per direction
of Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB
should have the fault indication system in
different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB
of Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years.MCB should have the fault
indication system in different colour for ON,
OFF & TRIP condition or Mid trip position for
Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 40 Amps rating, TPN,
415 volts, RCCB,300mA .Make-Equievalant
higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model
A catagory ISI marked as approved in the
existing MCB DB complete with connections,
testing and commissioning etc. as required
as per direction of Engg.-in-Charge. .(4W
TPN BDB IC)AC ODU CONTROLLER). The
RCCB should be Replacement Warranty will
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
marked as approved in the existing MCB DB
in the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge.The RCCB should be Replacement
Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
349 62 approved in the existing MCB DB in the Nos 4.00 3116.38 12,465.52
existing MCB DB complete with connections
as per direction of Engg.-in-Charge.(for
power BDB & AC ODU, 8 way TPN BDB
IC).The RCCB should be Replacement
Warranty will be 5 years
350 63 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI marked
including accessories and providing
masonary with cover plate having loccking
351 64 arrangement and watering pipe etc (WITH Nos 1.00 16398.46 16,398.46
charcoal and salt) as required as per
direction of Engg.-in-Charge. The entire
earthing system should be Replacement
Warranty will be 5 years
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts &
washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on
top with removable RCC cover complete
with labour for excavation of pit in all kinds
of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire
on surface or in recess for loop earthing as
required.as per direction of Engg.-in-
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Supplying and making brick massonary
pedastal with extra super structure
including cement plastering etc as required
as per direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
357 70 following size cables as per direction of 0 0.00 0.00 0.00
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
359 72 following size cables as per direction of 0 0.00 0.00 0.00
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
362 75 4 core x 4 sq mm (for small power) Mtr 8.00 103.69 829.49
3.5core x 35 sq mm (To FDB LIGHT / power
363 76 BDB/UPS PANEL,separate panel for OT Mtr 14.00 257.72 3,608.13
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in
365 78 the trench in one horizental formation Mtr 12.00 153.40 1,840.80
including excavation ,sand coushing
protection covering and refilling the trench
etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one
horizental formation including excavation
,sand coushing protection covering and
refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one
horizental formation including excavation
,sand coushing protection covering and
refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
368 81 exceeding 25 SQ. MM direct in ground in Mtr 20.00 49.56 991.20
the EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
369 82 25 SQ. MM but not exceeding 400 SQ. MM Mtr 18.00 68.44 1,231.92
direct in ground in the EXISTING PIPE etc
as required as per direction of Engg.-in -
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
370 83 exceeding 25 SQ. MM in open duct etc as Mtr 12.00 54.28 651.36
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
371 84 25 SQ. MM in open duct 400 SQ. MM direct Mtr 11.00 54.28 597.08
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
372 85 exceeding 25 SQ. MM in surface with Mtr 12.00 95.58 1,146.96
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
373 86 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 11.00 151.04 1,661.44
surface with shaddle and screw etc as
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
374 87 exceeding 400 SQ. MM From 120 SQ. MM Mtr 8.00 154.58 1,236.64
in surface with shaddle and screw etc as
required as per direction of Engg.-in -
Supplying and making end termination with
brass compression gland and aluminium
lugs for following mentioned size cable.as
per direction of Engg.-in-Charge.
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground
380 93 complete with G.I fitting incl. trenching(75 0 0.00 0.00 0.00
mm depth)and refilling as per direction of
Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
382 95 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-
384 97 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by siemens gray powder cote paint
385 98 is designed as G.A drawing as per direction Set 1.00 230525.98 2,30,525.98
of Engg.-in-Charge.Warrentee period of
replacement of panel & accessories must
be 5 years & compelete test certificate must
be submitted along with panel board
including component list.
In commer-1-01 number of 400A(20-400)
4P Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(HVAC & MEDICAL
EQUIPEMENT)(200 KVA TRANSFORMER)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
In commer-2-01 number of 160A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
overload from 36%-100% & Electrical
387 100 locking for normal & DG (make- 0 0.00 0.00 0.00
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked) along with 01 no of 160A 4P
onload changeover switch (125 KVA DG 01
Busbar-1&2 04 numbers of 500Amps
Aluminium busbar with 1A/SQ.MM current
388 101 carring capacity. busbar duly sleeved by 0 0.00 0.00 0.00
color coated PVC sleeve & supported by
suitable size DMC insulator. (for outgoing)
Out going- 05 numbers of 63A 4P MCB
(make- Legrand or equivalent reputed
389 102 make ISI marked)BDB P/AC,(timer panel & 0 0.00 0.00 0.00
water supply management,,FIRE,WTP,STP &
Out going- 2 numbers of 125A 4P
Icu=50%Ics, LSIG MCCB withTMR based
release with adjustable overload (make-
390 103 LEGRAND/Schneider/ABB/Siemens, ISI 0 0.00 0.00 0.00
marked)(FLOOR RAW POWER PANEL
,SPARE,DG PANEL OF OT COMPLEX & CT,AC
Out going- 6 numbers of 32A 4P MCB
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(LIGHT SUPPLY)
Instrument- (i) 03 numbers phase
392 105 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
(ii) 02 set of digital type multifunction
meter with CT for
voltage,current,frequency,PF,THD indication
with RS 485 COMPACTIVITY FOR bms data.
(iii) 4 nos of 65kA SP VSD WITH 32A SP
UPS PANEL FOR EMERGENCY(COMMON &
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING EMERGENCY
LIGHT)as per direction of Engg.-in-Charge.
Warrentee period of replacement of panel &
accessories must be 5 years & compelete
test certificate must be submitted along
with panel board including component list.
In commer- 01 numbers of 63 Amps 4P
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=50% Isc) with shunt trip &
axulary for BMS & mechnical inter locking
for one incommer source to other.
Busbar- 04 numbers of 100Amps
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 32A 2P MCB UPS Light
load for each floor.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Out going- 02 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase
401 114 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
(ii) 01 set of 0-100Amps Ammeter Digital
type & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
NB- This panel should have proper earth by
suitable rated copper flat.
UPS SYSTEM(Emergency & COMMON AREA)
Supply ,installation ,testing &
commissioning of 10KVA UPS SYSTEM
WITH suitable size battery bank, rated of
battery , IGBT based inverter system with
inbuilt isolation transformer & automatic
phase sicuency corrector of 3ph in put to 3
ph output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of Numeric/ RELLIO/
Emersion or equievalant reputed make A
406 119 catogory, ISI marked as approved ) Set 1.00 498756.50 4,98,756.50
including supply of rack inverter stand with
sufficient backup upto 30 minutes with all
required accessories to complete the job
including all connection.LOAD OF
EMERGENCY) as per direction of Engg.-in-
Charge. Warrentee period of all accessories
& component & system must be 2 years &
compelete test certificate must be
submitted along with ups including
component list & SLD.
CABLE TRAY /RACE WAY FOR
DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make
& model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as
per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand -
Cablofil make or equievalant reputed make
& model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as
per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand -
Cablofil make or equievalant reputed make
& model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as
per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI
marked as approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL
54 MM HEIGHT,COST WITHOUT GST,WITH
LESS DISCOUNT(REPUTED FACTORY MADE
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Transportation, erection, testing
and commissioning of 3 Phase, 415V, 50Hz,
water cooled multi cylinder diesel generator
set with alternator of 20 KVA ( Make -
Kirloskar / Jakson / sterling) out put
contineous rating directly coupled Engine
and Alternator with guard and mounted on
a common base plate of Robust construction
and complete with AMF panel having IP-52
protection, Acoustic Enclosure as per CPCB
norms , sound absorbing material, to
restrict sound level up to 75 dB up to 1 mtr
distance and as per CPCB norms etc as per
following specifications mentioned below.
A. Alternator make : Kirloskar / Stamford /
Crompton Greaves / Leroy Somer
/Caterpillar or equievalant reputed make &
model ISI marked as approved as per
direction of Engg.-in-Charge. Warrentee
period of panel must be 5 years &
compelete test certificate must be
submitted along with DG set including
component list & smoke exhaust system
drawing,certified ISO 8528
ALTERNATOR:The alternator of the output
rating shall be 3 Phase, 415V, 50Hz, Ac ,
0.8 P.F. lagging at 1500 RPM. The
414 127 alternator is self excited, self regulated, and 0 0.00 0.00 0.00
shall confirm to IS: 13364 of 1992 with
regulation of +5% from no load to full load.
degree of protections shall be IP21.
ENGINE: Diesel Engine make : Kirloskar /
Cummins / Caterpillar / Perkins /Volvo
penta /Ashok Leyland / Mahindra &
Mahindra / Greaves Cotton /Tata or
equievalant make & model ISI marked as
approved . Diesel Engine start, developing
suitable BHP output at 1500 RPM with
mechanical / electronic governing so as to
enable the alternator to give 20 KVA
continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be
415 128 capable of providing 10% O/L for 1 Hr for 0 0.00 0.00 0.00
every 11 Hrs of continuous running at full
load. The engine with 1st filling of oil and
01. Exhaust pipe of required size and length
with insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
AMF PANEL: Cubical, Compartmentalized,
AMF Panel Baord with all Power & Control
Contractors, Switches, Meters and other
416 129 accessories, Internal Wiring, connection, 0 0.00 0.00 0.00
inter-connection etc. for Trouble Free
smooth function for 20 KVA DG Set
complete with Battery Charger & leads as
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
BASE PLATE: Common Base Plate of
required size for mounting of Engine
417 130 Alternator Set fabricated from MS Channerl 0 0.00 0.00 0.00
and vibration damping arrangement with
cushy foor mounting including paintng etc.
FOUNDATION: Suitable size Cement
Concrete (1:2:4) foundation duly plastered
and finished with neat coat Cement as
required along with smoke exhaust system
piping including base frame of structure &
lightening protection system. *It also
418 131 includes 2 nos GI pipe earthing for body and set 1.00 599353.86 5,99,353.86
2 nos copper plate earthing for neutral,
control cable of 15mtr 2.5sqmm 6core , civil
foundation work.
(The Manufacturing of DG set shall not in
any case be more than six months old from
the date of award of work)
419 132 EXTERNAL LIGHT SYSTEM 0 0.00 0.00 0.00
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look Panasonic/philips/wiproor
equievalant reputed make & model A
catogory, ISI marked as approved 35 W LED
street light having die cast aluminium
housing with toughened glass having
lumen efficacy of 110 lm/w or more (As per
LM 79 report of third party NABL lab) ,IP 65
protection or more , LED street light model
will be vide Panasonic / Philips/LT/WIPRO
make or equievalant reputed make A
catagory ISI marked as approved having
warrantied for a period of 5 years . The
luminaire should be supplied along with
bracket maintenance free for inspection as
required as per direction of Engg.-in-
Supplying, Erection, Fixing, connection &
testing of Panasonic 40 LED GATE Light of
Panasonic / Philips/LT/WIPRO or
equievalant reputed make A catagory ISI
marked as approved maintenance free
having 2 years warranty G.I P ipe with
braket including MCB box & including with
foundation as per the Drawing for
inspection as required & as per direction of
Engg.-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts &
washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on
top with removable RCC cover complete
with labour for excavation of pit in all kinds
of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire
on surface or in recess for loop earthing as
required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR
FLOOR mounted cubical type MCB
ENCLOSURE made out by 2mm CRCA steel
sheet duly derusted & pented by simens
gray powder cote paint is designed as G.A
drawing. (FOR USE) with 20A TPN MCB 01
424 137 NOLegrand/Schneider/L&T/ABB or Set 1.00 2411.92 2,411.92
equievalant make & model as per direction
of Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period 2 years of acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of
reputed make,ISI marked with all other
concerned materials as per direction of
425 138 Engg.-in-Charge. Ncessary test report & mtrs 56.00 125.08 7,004.48
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
Supply,installation, testing and
427 140 commissioning of 4 P&T & 14 Extensions Set 1.00 15930.00 15,930.00
Hybrid EPABX System
Supply,installation, testing and
commissioning of RJ11 Modular Complete in
concealed manner including termination of
Supply & Laying of 2 Core 0.5mm telephone
429 142 cable using Rigid PVC Pipe in concealed Rmt 200.00 76.70 15,340.00
manner per running metre of cable laid.
Supply,installation, testing and
430 143 commissioning of Electronic Push Button Nos 4.00 826.00 3,304.00
Telephone with Caller ID
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,installation, testing and
commissioning of RJ45 Modular Complete in
concealed manner including termination of
Supply & Laying of Cat 6 cable using Rigid
433 146 PVC Pipe in concealed manner per running Rmt 211.00 67.26 14,191.86
metre of cable laid.
Supply,installation, testing and
commissioning of Patch Panel, 6U Rack,
Cable Manager, Cooling Fan x 2 Nos.,
Earthing Kit, Power Manager
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Supply,installation, testing and
438 151 commissioning of 10 Channel DVR with 2 Set 1.00 28910.00 28,910.00
Supply,installation, testing and
439 152 commissioning of 4 MP Dome / Bullet Nos 4.00 18644.00 74,576.00
Camera with 25 Mtrs IR Range
Supply & Laying of RG59+ 3 Core cable
440 153 using Rigid PVC Pipe in concealed manner Rmt 155.00 128.62 19,936.10
per running metre of cable laid.
Supply,installation, testing and
commissioning of BNC & DC Connectors
Supply,installation, testing and
442 155 commissionining of 4 TB CCTV Surveillance Nos 1.00 15104.00 15,104.00
Supply,installation, testing and
commissionining of 10 Amps Power Supply
Supply,installation, testing and
commissioning of Smart 32" LED Monitor
Supply,installation, testing and
commissioning of Bird Canopy
Supply,installation, testing and
commissioning of Wireless Mouse
447 160 NURSE CALLING SYSTEM 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing &
commissoning Charges of VDE 0834
APPROVED PATIENT HANDSET
WITHOUT VOICE shall consist of :
- 1 x RJ 45 Jack for connecting in to
connection module with
autodisconnecting technology intellifix
448 161 - Membrane Key pand with Nurse Call No's 4.00 6466.40 25,865.60
- Soft touch buttons for Optinally controll
of room and bed lights
- Integrated Finder and reassurance light
- Antimicrobial Coating
- Cradle for mouting the handset
Supply, Installation, Testing &
commissoning Charges of SITC OF VDE
0834 complied BEDSIDE
CONNECTION MODULE WITHOUT
VOICE for connecting the patient handset
shall consist of :-Mounting rail with
board, 2 x RJ45 sockets for connecting
-Membrane keypad with Call button and
Cancel / Presence Button and integrated
449 162 reassurance LED light No's 1.00 11174.60 11,174.60
- 1x RJ 45 socket with for connecting
without voice Patient handset
- 1 x 5 Pole DIN connector to be used as
a diagnostic port
- 4 x RJ 12 connection to be used for
connecting Buttons and Lamp module
- Antimicrobial Keypand
- It should include Countersunk fitting
Supply, Installation, Testing &
commissoning Charges of Pull Button
with integrated finder lights or
reassurance light, micro switch with a 2
metre pull cord and aluminous grip with a
nurse symbol printed on it, Countersunk
switchbox etc., complete. Pull cord
characteristics with max. force at break
120N (ca.12 kg) for hygiene reasons it
must also be possible to change the pull
cord very easily using a snap hook for
Basic Device, 4 screw-type terminals for
connecting the power supply circuit etc.,
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing &
commissoning Charges of LAMP module
For optical indication of calls, presences
and reminders in the relevant colours
conforming to VDE0834 consisting of:
- 4 light chambers with light reflectors for
homogeneous illumination,
- 1 light chamber fitted with 3 ultra bright
451 164 - 1 light chamber fitted with 3 ultra bright No's 2.00 3941.20 7,882.40
- 1 light chamber fitted with 3 ultra bright
- 1 light chamber fitted with 3 ultra bright
- Every light chamber conforms to the
light strength set out by VDE0834,
- the LED life expectancy is
approximately 100,000 operating hours,
Supply , Laying, testing & commissioning
of CAT6e cable in rigid PVC
Pipe/Concealed/Casing Caping per
running metre of cable used
Supply , Installation, testing ,
453 166 commissioning of TV socket wih base & No's 2.00 1165.84 2,331.68
cover complete.
Supply , Laying, testing & commissioning
of RG6 Solid Copper cable in PVC
Pipe/Casing caping per mtr. of cable
455 0 Sub-Total of Electrical Works 0 0.00 0.00 31,59,852.73
457 1 Supply of A,C with indoor and outdoor unit 0 0.00 0.00 0.00
1.5 TR high wall split A.C 3Star
(Make:Toshiba/Hitachi/Carrier/Diakin or eq.
459 3 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
461 5 1 TR to 3 TR high wall split A.C mtr 5.00 988.84 4,944.20
Supply,installation & fabrication of MS base
frame for both indoor and outdoor unit and
other nesessary material to complete the
464 8 1 TR to 3 TR high wall split A.C no 5.00 1984.76 9,923.80
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,installation & fabrication of
Insulated drain water piping from indoor to
nearestdrain point separate to all and other
nesessary material to complete the job.
468 12 SHEET METAL WORKS 0 0.00 0.00 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
471 15 For 1 TR to3 TR high wall split A.C no 5.00 145.14 725.70
474 0 Sub-Total of HVAC Works 0 0.00 0.00 2,93,713.80
475 0 Firefighting Works 0 0.00 0.00 0.00
476 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to IS: 2878
made from ISI marked seamless cylinder confirming to
IS: 7285, fitted with ISI marked controlled valve
confirming to IS: 3224, high pressure 1mtr discharge
477 2 hose & horn complete with initial gas charged with Nos 2.00 14309.86 28,619.72
carrying handle & wall mounting bracket as per
direction of Engineer-in-charge. (Make:CS-
FIRE/SUNMAX/CANEXE or equievalant )
Supplying, installation, testing and commissioning of
Mechanical Foam type 9 litre capacity Fire
Extinguisher, ISI marked, IS: 10204, containing 540 ml
AFFF liquid ISI marked, IS: 4989 Part II and a
polyurethane coated CO2 Gas Cartridge, ISI marked,
IS: 4947 complete with gunmetal union cap, nylon hose
with plastic foam making branch and wall mounting
bracket as per direction of Engineer-in-charge.
479 0 Sub-Total of Firefighting Works 0 0.00 0.00 34,624.74
480 Grand Total 2,02,56,064.58
480 Grand Total 2,02,56,064.58
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SAM 011 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sambalpur PHC Padiabahal of Jujomura.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .