Construction of boundary wall at Bn Hqrs Lethpora Part B

Amount

Brick work with FPS bricks of class designation 75-A in super structure up to floor V-level In cement mortar 1:6 (1cement: 6 fine sand). Including all carriages and cost of material involved.

Providing and fixing ‘Y’ shaped angle iron over the boundary wall by embedding in concrete block of size 30x30x45 cm of mix 1:2:4 and by using of M S angle (50x50x6) of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc complete including costs and carriages of all materials involved

Providing and fixing colour coated Hi-rib sheets on top of wall with angle iron posts horizontally and fixed with nuts bolts / rivets excluding cost of iron posts. (0.50mm thick sheets)

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50M from edge cutting . Disposed earth to be leveled and neatly dressed in all kinds of soil.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

Providing and laying Reinforced cement concrete 1:1.5:3 (M-20) (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in foundations, plinths, plinth beams, lintels, suspended floor, roofs, beams, plinth beams, landings, columns, pillars & access plate form including cost and carriages of all material involved upto site complete. All works upto floor V- level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor V-level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all carriages and cost of material involved.

Centering and shuttering including strutting propping etc. and removal of form work in foundation, footings basis of columns etc. including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form work for columns, pillars, piers, abutments, posts and struts etc.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor five level in 1:1.5:3 (1 cement :1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size) crushed. excluding the cost of centring, shuttering and finishing Including all carriages and costs of material involved.

15mm cement plaster on rough side of single of mix: 1:4 mix (1 cement: 4 fine sand) including all carriages and cost of materials involved.

Finishing walls with deluxe multi surface paint system for external surface using primer as per manufactures specifications, two or more coats applied @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr/10 sqm.

Supplying, straining and fixing galvanized steel barbed wire (Type –A size 5 IS: 278-1978) mass per metre: 97g min) to post with GI binding wire tied to bar-nibs/ clips/ staples/ cutting of angle iron posts/ making holes length of the wire to be measured. Including all carriages and cost of materials involved.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. in gates & similar work complete.

Ghulam Mohammad Bhat

ABDUL HAMID MIR

NAZIR AHMAD WANI

GULZAR AHMAD MALLA

M/S K2 BUILDERS