Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-Finance | ₹20.4 L | L1 | Accepted-Finance L1 |
| 2 | L2₹23.1 LRejected-Finance | ₹23.1 L | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | S R CONTRACTORS L2 | PRASHANT MISHRA L1 |
|---|---|---|---|---|---|
| 1.01 | Earth work in excavation in foundation in ordinary soil ( loamy clay or sand ) i/c. lift upto 1.5 metre and lead upto 30 metre and i/c. back filling,watering and ramming of excavated earth into trenches and disposal of surplus earth as directed by Engineer-in-charge with cost of labour and T&P etc.required for proper completion of work. | 38.88 | Cum. | 70 ₹2,721.60 | 200 ₹7,776 |
| 1.02 | Providing & laying 80 mm. thick factory made C.C. Interlocking tiles/paver including 50mm. Thick compacted bed of fine sand proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope,filling joints with fine sand and below it laying 0.10m. thick base concrete in 1:3:6 with cost of all materials,labour and T&P etc required for proper completion of work. | 120 | Sqm. | 1,350 ₹1.6 L | 600 ₹72,000 |
| 1.03 | Providing & laying of Cement Concrete in 1:3:6 (1 cement:3 coarse sand:6 stone grit 20-40 mm.size) including cost all materials ,labour and T&P etc. required for proper completion of work. | 4.86 | Cum. | 4,000 ₹19,440 | 5,400 ₹26,244 |
| 1.04 | Providing & fixing Centering & Shuttering for C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work. | 4.94 | Sqm. | 200 ₹988.80 | 400 ₹1,977.60 |
| 1.05 | Steel Reinforcement for R.C.C. Work i/c. it's straightening, cutting, bending, binding, cutting and placing in position and cost of binding wire with cost of all materials, labour and T&P etc. required for proper completion of work. | 2.98 | MT | 67,000 ₹2.0 L | 75,000 ₹2.2 L |
| 1.06 | R.C.C. M-20 Grade (1 Cement :1.5 Coarse sand : 3 Grit 12-20 mm.size) i/c. cost of all materials, labour and T&P etc. but excluding cost of reinforcement required for proper completion of work. | 42.12 | Cum. | 5,850 ₹2.5 L | 7,500 ₹3.2 L |
| 1.07 | Providing & fixing Centering & Shuttering for R.C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work. | 241.93 | sqm. | 500 ₹1.2 L | 700 ₹1.7 L |
| 1.08 | Brick work in 1:4(1cement:4coarse sand) cement coarse sand mortar including cost of all materials,labour and T&P etc. required for proper completion of work. | 20.97 | Cum. | 5,200 ₹1.1 L | 5,800 ₹1.2 L |
| 1.09 | 12.50mm thick cement plaster in 1:4 (1Cement:4Coarse sand) cement mortar i/c. cost of all materials, labour, and T&P etc . Required for proper completion of work. | 383.01 | sqm. | 170 ₹65,111.70 | 210 ₹80,432.10 |
| 1.10 | Providing and fixing of Gates including of all materials, labour, T&P all lead and lift required of proper completion of work : per mtr. @ 35.30 kg/mtr | 1 | Nos | 3,95,852 ₹4.0 L | 60,000 ₹60,000 |
Tender Value
₹31.4 L
EMD Value
₹63,000
Closing Date
27 Jan 2026, 3:00 pmClosed
Executive Engineer
office of executive engineer head works division agra canal okhla new delhi 110025
Renovation work of Main Entrance gate of Okhla Barrage located in Delhi State
2026_UPIDC_1107054_1
24/EE/2025-26
Open Tender
Civil Works
60 days
Main Entrance gate of Okhla Barrage located in Del
Please refer Tender documents.
2 documents required · 2 mandatory
₹354
₹63,000
6 Feb 2026
20 Jan 2026
27 Jan 2026
20 Jan 2026
27 Jan 2026
20 Jan 2026
Earth work in excavation in foundation in ordinary soil ( loamy clay or sand ) i/c. lift upto 1.5 metre and lead upto 30 metre and i/c. back filling,watering and ramming of excavated earth into trenches and disposal of surplus earth as directed by Engineer-in-charge with cost of labour and T&P etc.required for proper completion of work.
Providing & laying 80 mm. thick factory made C.C. Interlocking tiles/paver including 50mm. Thick compacted bed of fine sand proper embedding/laying of interlocking tiles leveling and dressing of surface to required level and slope,filling joints with fine sand and below it laying 0.10m. thick base concrete in 1:3:6 with cost of all materials,labour and T&P etc required for proper completion of work.
Providing & laying of Cement Concrete in 1:3:6 (1 cement:3 coarse sand:6 stone grit 20-40 mm.size) including cost all materials ,labour and T&P etc. required for proper completion of work.
Providing & fixing Centering & Shuttering for C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work.
Steel Reinforcement for R.C.C. Work i/c. it's straightening, cutting, bending, binding, cutting and placing in position and cost of binding wire with cost of all materials, labour and T&P etc. required for proper completion of work.
R.C.C. M-20 Grade (1 Cement :1.5 Coarse sand : 3 Grit 12-20 mm.size) i/c. cost of all materials, labour and T&P etc. but excluding cost of reinforcement required for proper completion of work.
Providing & fixing Centering & Shuttering for R.C.C. Work i/c. rent of shuttering material ,labour and T&P etc. required for proper completion of work.
Brick work in 1:4(1cement:4coarse sand) cement coarse sand mortar including cost of all materials,labour and T&P etc. required for proper completion of work.
12.50mm thick cement plaster in 1:4 (1Cement:4Coarse sand) cement mortar i/c. cost of all materials, labour, and T&P etc . Required for proper completion of work.
Providing and fixing of Gates including of all materials, labour, T&P all lead and lift required of proper completion of work : per mtr. @ 35.30 kg/mtr
Sal wood work in chaukhat frame with M.S. hold fast i/c. cost of all materials,labour and T&P etc. required for proper completion of work.
Providing & fixing M.S. or iron work of small and section such as M.S. grills & railling etc.including rivetting or welding where necessary with cost of all materials,labour and T&P etc. required for proper completion of work.
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply venee ring with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Supply and fixing of 4.5 cm. thick C.P. teak wood glazed shutter in window including all necessary fittings with cost of all materials ,labour and T&P etc. required for proper completion of work.
Providing and fixing wire gauge shutters using galvanized S.S. 304 wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm, for doors, windows and clerestory windows with hinges and necessary screws :
Providing wall putty on new surface with approved quality material of berger/J.K./Birla or similar make two coat over plastered surface to prepare the surface even and smooth complete.
Providing & laying vitrified floor tiles size 600X600mm with water absorption less than 0.8% and conforming to to IS:15622,of approved make in all colour and shades,laid on 20mm. Thick cement mortor 1:4 (1cement : 4 coarse sand) jointing with grey cement [email protected] kg/sqm i/c. grouting the joints with cement and matching pigment etc. complete
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Finishing walls with Acrylic smooth exterior paint two coat of approved make of required shade on old surface by engineer-in-charge to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials, labour and T&P etc. for proper complition of work .
Distempering two coats with oil bound distemper i/c. cost of all materials,labour and T&P etc. complete.
Painting two coat over primming coat on steel and other metal surface including cleaning the surface of all dirt,dust and other foreign matter,sand papering and stopping i/c. cost of all materials, labour,T&P etc. required for proper completion of work.
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)-Medium Point
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)- Medium Point
Supplying & fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240 V "C" Curve DP MCB complete with connections, testing and commissioning etc as required .
Supplying and fixing of 3mt. Height pole light with single lamp i/c cost of installation, all material, labour/ electrician with 15.00 meter long two core 1.5 sqmm cable and 0.40 X 0.40 X 0.50 m CC 1:2:4 in foundation block i/c t&p etc all complete.
Supplying and fixing of 3mt. Height pole light with double lamp i/c cost of instalation, all material, labour / electrician with 15.00 meter long two core 1.5 sqmm cable and 0.40 X 0.40 X 0.50 m CC 1:2:4 in foundation block i/c t&p etc all complete.
Supplying and fixing of High Mast Lights including cost of high mast shaft, construction of foundation, outdoor stand mounted feeder piller with 32 A TPN MCb incomer,single dial time switch 45 A TP contractor 240 Watt dia-cast Aluminium IP 65 flood light with high power LED fixture Havells and civil foundation M-20 Grade with material and installation,testing, commisioning with complete lights wiring work. feeder pillerproviding with 2 np GI pipe earthing works including all complete.
Supplying and laying of 25 Sqmm 4 core Cable aluminum conductor PVC insulated armored sheathed cable 1100 volts grout with M.S. clamps of suitable size as directed by Engineer-in-charge, complete in all respect. Armoring shall be properly connected by clamps (Four underground laying cable shall be placed at a depth of 750 mm below ground level over a cushion of 75 m thick and all around and protected with bricks on sides and top).
Supplying and laying of PVC insualeted and PVC sheated/ XLPE power cable of 1.1 KV grade of up to 35 mm size direct in ground including excavation ,sand cuisioning, ptotective covering and refilling the trench etc as required
Polishing in high gloss/matt finish melamine clear polish on wood work in required colour/wooden shade texture surface including cleaning the surface of all dirt, dust and other forain matter, sand papering and stopping i/c cost of all materials, labour, T&P etc. required for proper completion of work.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
lot1.pdf
Tender Documents • 2.67 MB
BOQ_2042750.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid