GE/DE-44/2019-2020

Amount

Demolition of cement concrete, unreinforced, of any type and in any position below or above ground level, complete all as specified and as directed.

Demolition of cement concrete, reinforced, of any type and in any position below or above ground level, complete all as specified and as directed.

Demolition, Cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each and removing from site, complete all as specified and as directed.

Taking down Kitchen Cabinet and removing removing from site made out of 19mm thick partice board including all fittings and fixtures complete

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and as directed.

Dismantling boarding, any description, fixed any position with screws, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including cover fillets, complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 150mm), complete all as specified and as directed.

Taking down rain water/vent pipe of any description including fittings etc., including removing to store, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position, complete all as specified and as directed.

Taking down/dismantling existing water tanks of 500 ltrs capacity and removing off the site, complete all as specified and as directed.

Taking down/dismantling existing water tanks of 1000 ltrs capacity and removing off the site, complete all as specified and as directed.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 1.50Kms and depositing where directed at a level not exceeding 5.0Kms above the starting point, complete all as specified and as directed.

Hard core of gauge not exceeding 63mm stone aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick watering and ramming to a true surface, complete all as specified and directed

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in roof padding, and mass concrete, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in benching, coping, roof kerb, mud stops etc., and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed.

Precast cement concrete1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in mnahole cover slabs and similar items, including form work set in cement mortar 1:4, complete all as specified and as directed.

RCC 1:1.5:3 type A-1( using 20mm graded crushed stone aggregate) as in shelves, chajjas, or similar work, complete all as specified and directed.

Providing PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels, complete all as specified and as directed.

Cutting opening through brick wall built in cement mortar for door window and other openning including removing the rubbish not exceeding 50mtr, complete all as specified and as directed.

Cutting holes in brick wall not exceeding one brick thick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (20mm graded crushed stone aggregate), complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4 using old size bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan built to any radius in cement mortar 1:4 using old size bricks in half brick walls, complete all as specified and as directed.

18-20mm thick Granite stone slab (table rubbed and polished) in steps, shelves, and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

Labour only for circular cutting or notching of ganite/tile, complete all as specified and as directed. (Note : Contract agency will be responsible for any damage during cutting and notching work.)

Use and waste of form work to chajjas, shelves or similar work, for fair finished concrete surfaces, complete all as specified and as directed.

Formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide for rough finished surfaces, complete all as specified and as directed.

1st class Hard wood beading straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., including removing old beading, complete all as specified and as directed.

19-20mm thick Block board, interior grade, commercial type, fixed with screws in cup boad shutter/pelmets/cabinet/wardrobe etc. or to timber frame work, fixed in repairs, complete all as specified and as directed.

PVC board one side lamintated sheet 15-18 mm thick for kitchen cabinet & wardrobe/ cupboard made out of including providing cabinet for keeping baskets/ cutlery basket with handles, complete all as specified and as directed. Make : Rajshree or equivalent all as specified and as approved by Accepting Officer. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

Plain, solid, straight chowkats and frames made out of 2nd class hard wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and as directed.

Factory made 35mm thick second class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 30mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, stiles and rails of window shutters to be provided as specified in SSR Part-I section 8, clause 8.23(b) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

Continuous (Piano) hinges, brass body 30 mm width of flaps (when open), complete all as specified and as directed.

75 mm dia oval shape brass handle fancy type polished bright finish, complete all as specified and as directed.

150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel fixed with welding, complete all as specified and as directed.

75mm size butt hinges (medium weight) colled rolled mild steel fixed with welding, complete all as specified and as directed.

Extruded aluminium alloy handles fabricated type anodised of size 150mm size, complete all as specified and as directed.

Extruded aluminium alloy handles fabricated type anodised of size 100mm size, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

Aluminium anodized 100mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300mm size, complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm size, complete all as specified and as directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B- 21 of size 100mm, complete all as specified and as directed.

Mild steel 300mm size ordinary rat rails rod pattern springs including roller and roller plate, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm, and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm, and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and as directed.

Small articles such as hold fasts etc. of Flat Iron 25mm x 3mm, Grade conforming to Fe-310-0 or Fe-410-0, complete all as specified and as directed.

10mm thick slected quality toughned glass as in doors cut to size and shape including chamfering of edges cutting holes/ slotes for fixing asseries in existing openning for of both side openable door and fixed by cutting grove on walls for fixing of door assembly fixed in repairs to walls, complete all as specified and as directed. Make - Modi, saint gobin or equivalent.

Stainless steel universal door assembly for glass door including top and bottom pivot, floor machine,suitable floor door spring for smooth operation including all necessary fittings and fixers for fixing of door, complete all as specified and as directed. Make - Ozone or equivalent.

250mm long stainless steel door handle fixed to glass door, complete all as specified and as directed.

10mm thick slected quality toughned glass cut to size and shape including chamfering of edges cutting holes/ slotes for fixing asseries in existing openning and fixed by cutting grove on floor and top fixed with stainless steel brackets to walls or as required and make good the existing surfaces, fixed in repairs complete all as specified and as directed. Make - Modi, saint gobin or equivalent.

Elastic PVC beading for sliding glass doors, fixed in repairs, complete all as specified and asdirected.

Stainless steel brackets for fixing of toughned glass to walls, floor as required, complete all as specified and as directed.

Curtain rod/rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type end globes etc., complete all as specified and as directed.

Aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 300 mm width complele all as specified and as directed.

40mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type, complete all as specified and as directed.

Aluminium alloy powder coated (50micron) anodised auminium door frame section 104.0mm x 44.45mm x 2.00mm thickness ,shutters of aluminium section of size 85mm x 44mm x 2mm thick Top rail and both styled of size 104.0mm x 44.45mm x 2mm thick lock rail and bottom rail of xize 115mm x 44mm x 2mm thick with aluminium anodised snap beading and rubber packing including 5.50mm thick frosted designer glass (as approved by GE) including 100mm long aluminium butt hinges 04 Nos in each leaf, 200mm long tower bolt, 200mm long fancy type aluminium handle -02 Nos on each leaf, 4 lever brass mortick lock 100mm long & double action floor door spring heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and as directed.

All as per description of Srl item No. 73 here-in-before but frame of size 135mm x 65mm x 2.00mm thick with and including provision of fly proof shutter with stainless steel wiremesh 0.36mm nominal dia and average width of aperature 1.4mm and fixed with stainless steel wire staple and aluminium beading etc., complete all as specified and as directed.

Aluminium anodized grills with 6mm-5mm thick aluminium section having square gap of 100mm size with fixing rails of channels 12-15mm, complete all as specified and as directed.

10mm dia and above TMT bars cut to length, bend to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

TMT bars 5mm dia and over upto and including10mm dia cut to length, in stirrups and spacers including cutting and bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Mild steel work as in Hollow section, angle Iron, flat Iron for fixing indepently, connecting purlins, rafters, MS plate as required, forming holes, with bolted and welded attchment and curve shaped by welding (thickness of metal n.exc.6mm) making jointless by filing including cutting etc., complete all as specified and as directed.

0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws as per manufacturers instructions, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with with self tapping screws as per manufacturers instructions, complete all as specified and as directed.

False ceiling with(PVC Coated) GYP-BOARD ceiling tiles of size 595mm x 595mm, 6mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted ‘Tee’ or ‘L’ section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete all as specified and as directed. (a) Size of grid - 600 x 600 mm. (b) Size of main Tee – 24 x 32 x 0.35 mm. (c) Size of cross Tee – 24 x 30 x 0.35 mm. (d) Size of wall angle – 24 x 24 x 0.40 mm Make- Gypsum India Ltd/ARMSTRONG/BISON

False ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge. (Note:- The measurement shall be made from wall to wall without considering step(s).

50 mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base finished even and fair, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4 over PCC bedding mixed with water proofing compound and finishing the surface even and fair without using extra cement, complete all as specified and as directed.

Supply only liquid water proofing compound, complete all as specified and as directed.

Plain cement concrete 40mm thick 1:2:4 type B- 1 using 20mm graded crushed stone aggregate as in floor finish and finishing the surface even and fair without using extra cement and laid in alternate bays and provided with grooves complete all as specified and as directed.

75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

75 MM thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed.

Forming Grade 'A' Contraction ( Dummy) joints 50mm deep x 10mm wide filled with sealing compound, complete all as specified and as directed.

Dark shade vitrified tile 10 mm thick (Square / rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.8Sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cement mortar 1:4, complete all as specifed and as directed.

Non skid ceramic joint less coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed.

Non skid ceramic joint less coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 450x300x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, including dismantling of old tiles, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300x200x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, including dismantling of old tiles, complete all as specified and as directed.

Glazed Coloured Ceramic digital tiles with highlighter concept of premium quality in vertical surface 600x300x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, including dismantling of old tiles, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5 mm thick in cement mortar 1:3 in ceilings finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a layer of 2mm thcik JK/Birla wall care putty for a even and fair surface, complete all as specified and as directed.

Complete removal of existing treatment of walls to prepare old painted surfaces of walls and applying 1 mm thick wall care putty to make the surface even and smooth for applying required wall finishes and applying two coats of oil bound distemper, complete all as specified and as directed.

Preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specified and as directed.

Preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed.

Preparation of old treated surfaces of walls and applying two coats of white wash, complete all as specified and as directed.

Complete removal of existing treatment of walls to prepare old painted surfaces of walls and applying 1 mm thick wall care putty to make the surface even and smooth for applying required wall finishes, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying 1 mm thick wall care putty to make the surface even and smooth for applying required wall finishes, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of priming paints, complete all as specified and as directed.

Preparation of old plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of priming paint, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over one coat of exterion wall primer, complete all as specified and as directed.

Complete removal of existing treatment of walls and applying two coats of weather shield exterior emulsion paint over one coat of exterion wall primer, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old painted wooden surface and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

3.00mm thick figured glass, pin headed type, and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

Cutting chases for concealed water tubing girth exceeding 10cm but not exceeding 20cm girth and making good in cement mortar 1:3 in brick walls, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Vitreous china squatting pan ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests including P or S trap including provn of lime concrete bedding including connections to flushing cistern/pipe, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down closet pan (pedestal pattern), white with "S" trap, including plastic seat and cover and connecting to outgoing pipe, flush pipe and anti syphonage pipe, fixed in repairs, complete all as specified and as directed.

PVC valve less syphonic action type coloured flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

Health faucet with one metre long flexible tube in chrome finish fixed in position with brass chromium plated nuts for 15mm bore tubing, fixed in repairs, complete all as specified and as directed. (Make : Cat Part No. ALD-CHR593N of Jaquar/Cat part No. F160001 of Hindware/ Cat No F8030103 of Cera or equivalent in Somany).

Flushing jet for pedestal pattern water closet including flexible pipe , fixed in repairs, complete all as specified and as directed.

Toilet paper holder chromium plated brass fancy type, fixed in repairs, complete all as specified and as directed. (Make : Cat Part No. AAHS-1551 of Jaquar/ Cat Part No. 50071101 of Cera or equivalent in Hindware/Somany)

Soap dish, vitreous China white, approximate size 160x160x90mm, fixed in repairs, complete all as specified and as directed.

Wash basin, Vitreous China white flat back of size 550mmx400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and procelain stopper but including brackets, fixed in repairs, complete all as specified and as directed.

Vitreous china wash basin under counter ovel type size 600x425x195mm fixed under granite slab with all fitting and fixture, complete all as specified and as directed. (Make : jaquar Cat Part No - CNS - WHT- WB 03/Cat Part No - 110501 of Somany or equivalent in Hindware/Cera).

Fancy type single lever sink mixer with 210mm extension body swinging spout without popup waste ( table mounted)with 600 mm long braided house screwed for iron pipe,15mm bore, fixed in repairs, complete all as specified and as directed. (Make : Cat Part No.LYR-38173B of Jaquar/ Cat Part No. 3002511 of Cera/ or equivalent in Hindware/Somany

32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. (Make : Somany Cat Part No 120119 or equivalent in Jaquar/Hindware/Cera).

Vitreous china Lidless urinal with intregated FES snow white type of size 320x300x525mm including necessary combined fittings, fixed in repairs, complete all as specified and as directed. (Make : Cera Cat Part No S-4010102 or equivalent in Jaquar/Somany/Hindware).

Urinal partition curved shaped of 12.50 mm thick frosted glass chrome finish (size 120mm x 600 mm) complete all as specified and as directed. (Make : Jaquar/Somany/Hindware/Cera)

110mm bore PVC (SWR) pipes duble socketed, in any length with rubber ring joints, fixed to walls/laid in trenches or in floors, fixed in rapairs, complete all as specified and as directed.

75mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, fixed to walls/laid in trenches or in floors, fixed in rapairs, complete all as specified and as directed.

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/laid in trenches or in floors, fixed in rapairs, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

PVC (SWR) bend of 75mm bore any radius, complete all as specified and as directed.

PVC branch piece equal or unequal (single 'T') 110mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

PVC branch piece equal or unequal (double 'T') 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

PVC (SWR) floor trap, with grating including jointing to waste pipe in solvent cement for 100mm bore pipe, fixed in repairs, complete all as specified and as directed.

PVC (SWR) floor trap, with grating including jointing to waste pipe in solvent cement for 75mm bore pipe, fixed in repairs, complete all as specified and as directed.

PVC (SWR) vent cowl for 110mm bore pipe, fixed in repairs, complete all as specified and as directed.

Chromium plated steel Grating dome 125mm dia with or without hole for waste pipe fixed in repairs, complete all as specified and as directed.

Tubular towel rail 'D' type 20mm dia, chromium plated brass 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. Cat (Make : Part No. ACN1111BNM of Jaquar or equivalent in Hindware/Cera/Somany).

Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. Cat (Make : Part No. 5002109 of Cera or equivalent in Hindware/Jaquar/Somany).

Soap Dish fixed in position with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. Cat (Make : Part No. 5003106 of Cera or equivalent in Hindware/Jaquar/Somany).

Pillar tap, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm, fixed in repairs complete all as specified and as directed.

Stop valve fancy type 15mm bore cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions, fixed in repairs, complete all as specified and as directed. (Make : Cat Part No. ALD-083, ALD-089, ALD081 of Jaquar/or equivalent in Cera/Somany/Hindware).

Wall mixer 3- in - 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,Hand shower 105mm dia round shape single flow with air effective(ABS body and Face plate chromium plated) with rubit cleaning system fixed in repairs, complete all as specified and as directed. (Make : Cat Part No : FUS- 2928, OHS - 35495, SHA- 549D8, HSH 1775 & Cat No. SHA- 455L400 of Jaquar/or equivalent in Cera/Somany/Hindware).

Bib taps, 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

15mm bore bib tap chromium plated brass, Fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified and as directed. (Make- Jaquar Cat part No CON 107KN/Cat Part No 300210 of Cera/or equivalent in Hindware/Somany)

2 in 1 bib tap with wall flange, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified and as directed. (Make- Cera Cat part No 2002161/or equivalent in Jaquar/Hindware/Somany).

Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repair, complete all as specified and as directed. (Make- Cera Cat part No 3002210/or equivalent in Jaquar/Hindware/Somany)

Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repair, complete all as specified and as directed. (Make- Cera Cat part No 3002211/or equivalent in Jaquar/Hindware/Somany)

15mm dia Angle stop Valve chromium plated brass, fancy type with flange, high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed. (Make : Cat Part No. ORP-10053PM of Jaquar/ or equivalent in Cera/Somany/Hindware).

32 mm spring type PVC waste pipe fixed toWHB and urinals, ( Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

Waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms gms), fixed in repairs, complete all as specified and as directed.

CP brass shower rose fancy type 125mm size with or without swivel joint fixed in repair to 15mm bore pipe, complete all as specified and as directed.

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polyethene three layers 500 Litres water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including dismantling of old tank , complete all as specified and as directed.

Rotational moulded polyethene three layers 1000 Litres water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including dismantling of old tank , complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), fixed in repair, complete all as specified and as directed.

15mm bore PVC connection of size 450mm long with chromium plated brass end nuts, fixed in repairs, complete all as specified and as directed.

15mm bore brass chromium centre hole single lever basin mixer of mixing 'Hot' and 'Cold' water, screwed down for iron pipe, fixed in repairs, complete all as specified and as dircted. (Make : Cat No 210312 of Somany/ Cat Part No F3002461 of Cera/Cat Part No. F210010 of Hindware or equivalent in Jaquar).

CP wall mixer with CP telephonic shower pipe fixed over the surface as per manufacturers mannual and square O/H shower chromium plated fancy type, with long shank and cup washers, screwed both ends for iron pipes or for unions, fixed in repairs, complete all as specified and as directed. Cat Part Nso. 220920,210425,210426 of Somany/Cat Part Nos. F120019,160052,160056 of Hindware or equivalent in Cera/Jaquar

Sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm with all fitting and fixture, fixed in repairs. complete all as specified and as directed.

Sink with draining board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mm with all fitting and fixture. complete all as specified and as directed.

Circular Glass shelf corner type, having 225mm x 225mm size fixed in position with chromium plated brass frame fancy type, fixed in repairs, complete all as specified and as directed. Cat Part No. F5005502 of Cera/ Cat Part No. 203509 of Somany or equivalent in Hindware/Jaquar

Circular Glass shelf corner type, having 300mm x 300mm size fixed in position with chromium plated brass frame fancy type, fixed in repairs, fixed in repairs, complete all as specified and as directed. Cat Part No. F5005103 of Cera/ Cat Part No.ACN1173 of Jaquar or equivalent in Hindware/Somany

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repair, complete all as specified and as directed.

Single mirror cabinet of size 555mm x 350mm in thermo set urea formal dehyde or phenol formal dehyde with mirror of 4 mm thick fitten with hinged door, fixed in repairs, complete all as specified and as directed. Make : PEARL/ Prayag /Commander

Fancy type looking mirror of size (700x500mm) with eitching on border fixed in positon, complete all as specified and as directed. (Make- Cera cat part No 300210 or equivalent in Jaquar/Hindware/Somany).

Towel Rack 600mm long with lower hanger of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats. complete all as specified and as directed. (Make- Cat Part No. ACN-1181S of Jaquar or equivalent in Hindware/Somany/Cera)

Bathroom Vanity of width 80 CM, Depth 45 CM , with 3 drawers moving on suitable channels, including all fitting and fixtures, fixed in repairs, complete all as specified and as directed. Model No. Walnut - KB125201/White - KB 125200

Plain cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) in bed of concrete pipe 150 mm dia including forming cradle after they are laid and tested complete all as specified and directed.

SGSW pipe 150 mm dia including jointing with cement mortar, complete all as specified and directed.

Cutting into existing manholes for connecting 100mm bore of pipe to new drains, making good to pipe in cement concrete 1:2:4 type B-1, including cutting into existing benching for and forming branch channel (1/2 round or 3/4 section) smooth finished including rendering, complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.)

All as per description of Srl item No. 193 here-in-before but for one 3 pin socket outlet 5/6 Amps on same board.

All as per description of Srl item No. 193 here-in-before but for one socket outlet 5/6 Amps on independent board.

All as per description of Srl item No.193 here-in-before but for power socket 15/16 Amp with cable 2.5 Sqmm for phase & neutral for earth 1.5 Sqmm.

Replacement of Modular Fan regulator step type, 240 volt, 2 Module, complete all as specified and as directed.

Replacement of Modular Switch piano one way, 01 module, 6 Amp, complete all as specified and as directed.

Replacement of Modular socket two-in-one, 5 pin, 6 Amp universal type 02 module, complete all as specified and as directed.

Replacement of Modular Switch 16 Amp one way, 01 module, complete all as specified and as directed.

Replacement of Modular socket out let 6/16 Amp, 02 module, complete all as specified and as directed.

Replacement of Modular Bell push switch 6 Amp, 1 Module, complete all as specified and as directed.

Replacement of lamp holder with polycarbonate body, suitable for angle holder/ batten fitting including 15 Watt LED lamp, complete all as specified and as directed.

Modular TV socket (RJ 11 Socket Jack) 01 Module size socket as per site requirement, complete all as specified and as directed.

Modular Telephone socket Jack 01 Module size socket as per site requirement, complete all as specified and as directed.

Replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

Replacement of Bell DINGDONG type, 6 Amp, 240 volts single pole, complete all as specified and as directed.

TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for TV wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as specified and as directed.

Telephone Wiring withtwin core, PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in separate concealed PVC conduit complete all as specified and as directed.

Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 2.50 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and as directed. Note :- a) The conduit and conduit accessories shall be measured and paid as one unit. b) The cost of earth wire is deemed to included in he quoted rates.

Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 2.50 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and as directed. Note :- a) The conduit and conduit accessories shall be measured and paid as one unit. b) The cost of earth wire is deemed to included in he quoted rates.

Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and as directed. Note :- a) The conduit and conduit accessories shall be measured and paid as one unit. b) The cost of earth wire is deemed to included in he quoted rates.

Replacement of MCCB Incomer fabricated distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 4 way, 415 volts with bus bar rating 250 Amps, dust and vermin proof and IP 42 - IK 09 protection with and suitable for incorporation of MCB SP & 160 Amps MCCB 4 Pole,complete all as specified and as directed. (Note : 1. The cost of removing old wooden/metal box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.)

Replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections, complete all as specified and as directed. (Note : The cost of removing old wooden box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quoted rate.)

Replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections, complete all as specified and as directed. (Note : The cost of removing old wooden box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quoted rate.)

Replacement of MCCB 3 Pole, 415V, with adjustable thermal and fixed magnetic settings type 160 Amps with breaking capacity 36 KA, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 32 Amp, Single Pole with neutral, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 40 to 63 Amp, Single Pole with neutral, complete all as specified and as directed.

Replacement of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 32 Amp, 10 kA complete all as specified and as directed.

Replacement of Wall mounting tube light fitting, 20/22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of LED 2 feet integrated batten type wall light fitting T-5, 12 watt with aluminium extruded body including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of LED Mirror light 10/12W diffuser, driver including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of LED round recess mounting downlight luminare slim type, 16 Watt, cool white 240volts, 50 Hz with driver/transformer etc., suitable for AS/GB/POP ceiling including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of LED round recess mounting downlight luminare slim type, 6 Watt, cool white 240volts, 50 Hz with driver/transformer etc., suitable for AS/GB/POP ceiling including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of Recess mounting 2 feet x 2 feet square flat panel ultra slim scoop LED light 36 W cool white 5600-6000K, input voltage 110-240 volt, 50 Hz with driver/transformer ect suitable for AS/GB/POP ceiling incl making electric connection, complete all as specified and as directed.

Replacement of LED Bulk head light fitting 10 Watt, 230 V bulk head luminaries with lamp holders, etc complete with all aceessories and inlcd connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed.

Replacement of bed light including 9 watt LED Lamp, wall mounted fancy type including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of LED security light luminaire 40 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 65 protection with and including driver/transformer and including connector, complete all as specified and as directed.

Replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Replacement of CP connections threaded type 10mm bore with CP Brass nuts of length 450mm including rubber washers, complete all as specified and as directed.

Replacement of PVC connections 15mm bore with CP Brass nuts of length 450mm, complete all as specified and as directed.

Provision of hanging arrangement for ceiling fan 1200/1400mm sweep, in exisiting ceiling including making good disturbed surfaces to match with exisitng surface, complete all as specified and directed.

Provision of fixing arrangement for exhaust fan 300mm sweep, in exisiting wall including cutting of brick masonry wall and making good disturbed surfaces to match with exisitng surface, complete all as specified and directed.

Replacement of Ceiling fan 1200mm sweep, 240 V, DB, 1 star rating, 50 Hz, single phase complete all as specified and directed.

Replacement of Ceiling fan 1200mm sweep, 240 V, DB, 1 star rating, 50 Hz, single phase complete all as specified and directed.

Replacement of fresh air fan 200 mm sweep plastic body type incuding self cosing louver and making all electric connections, complete all as specified and as directed.

Replacement of Geyser 25 ltrs capacity ISI marked having 5 Star BEE rating, with steel tank complete incl necessary nuts, bolts and including mason works and making necessary electric/water connections, complete all as specified and as directed.

Hand drier stianless steel body fully automatic wall mounted type with infrared sensor and high speed motor for dispensing hot air and including making necessary electric connections, complete all as specified and as directed.

Earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation, complete all as specified and as directed.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Vipul Construction

M/s Shubh Enterprises

A R construction