REPAIRS TO TRAVERSE, ROOF, FLOORING, PLUMBING, JOINERY AT WSA/FIRING RANGE AND REPAIRS TO COLLAPSIBLE GATES, HANGER DOOR, ROLLING SHUTTER UNDER AGE B/R-I OF GE (AF) LOHEGAON AT AF STN PUNE

Amount

Dismantling plain or corrugated steel /fibre/AC sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F MS Wind ties for roof including securing bolts, posts & struts including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters; covering to door shutters; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. complete all as specified and as directed.

M&L for Plates (Plain or corrugated) channels, square cut or notched (Ordinery and counter sunk forming holes ,without any attachment complete all as specified and as directed.

S&F 0.56mm aluminium semi corrugated sheeting Alloy 31000 H4, STUCCO Embossed finish with side lap as specified by manufacturer fixed with coach screw and aluminium washer in roof and wall etc. with end laps stitched with 25 x 6mm G.I bolts at 20cm apart complete all as specified and as directed.

S&F 0.56mm Plain aluminium sheeting alloy 31000 H4 in ridges ,hips,valley gutter,drip and straight flashing (length and girth as fIxed) complete all as specified and as directed.

S&F 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts all as specified and directed by Engr-in- charge.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as directed by Engr-in-charge.

Hacking old broken glass (any thick ness, size, quality or description) from aluminium/steel/wooden frame work or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed.

Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

M&L Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for powder coating in Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions with etc as per item no 26 above. complete all as specified.Note: Over all weight of Anodised aluminium frame shall be considered for payment complete all as specified and as directed.

M&Lfor Anodised aluminium door frame with shutters, aluminium sections weeighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured and paid seperately) complete all as specified and as directed.

M&L for anodised aluminium window and ventilator shutters with frame of any type with or without sash bars, aluminium sections weeighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as suitable stays ,suitable hinges (if required.) suitable handles (1 no.) (Glass / Wiremesh should be measured and paid seperately)complete all as specified and as directed.

M&L for powder coating in Anodised aluminium frames of shutters of Doors ,window and ventilator openings etc as per items 28 & 29 above. complete all as specified and as directed. Note: Over all area of shutters of Doors ,window and ventilator shall be considered for payment.

M&L sheet glass 5.0mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete all as specified and as directed.

S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats ,complete all as specified and as directed.

S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay,complete with glazing bars,dovatiled or welded (Glass shall be measured Seperately)complete all as specified and directed by Engineer-in-Charge.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs mild steel ordinary rat tail rod pattern springsof size upto 300mm long including roller and roller plate complete all as specified and as directed.

S&F in repairs Aluminium alloy anodised ,sliding door bolt 250mm with hasp,staple(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast, aluminium alloy complete all as specified and as directed.

S&F in repairs Aluminium (extruded section) door closer hydraulically regulated ,designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and as directed.

S&F in repairs 100mm Aluminium Mortice lock 2 livers vertical type complete all as specified and as directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed.

M&L Anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605 mm including necessary hanger wires as per manufacturers specification complete all as specified.

Providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Taking down cement plaster any description on brick/stone or concrete walls, etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-2 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:4 complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick works finished even andfair without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Supply only Liquid water proofing copmpund.

M&L for 15 mm thick rendering on unfair faces of brick works finished even andfair without using extra cement in cement mortar 1:6 complete all as specified and as directed.

M&L applying two coats of camouflage pattern synthetic enamel painting to new or untreated steel surfaces l/ roofing sheets of any description surface over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces, removal of galvanisation if reqd , including filling with filler where reqd complete all as specified and as directed.

M&L for preparation of new concrete /plastered surface of any description, two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preparation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer as directed complete all as specified and as directed.

M&L for preparation of existing steel surface of any descripton ,over 10cm in width or girth ,not otherwise described and applying one coat of synthetic enamel paint ,complete all as specified and as directed.

M&L for preparation of old plastered wall surface of any description and applyng one coat of Oil bound distemper complete all as specified and as directed.

M&L for preparation of old plastered wall surface of any description and applyng one coat of white wash complete all as specified and as directed.

M&L for preparation of completely removed surface of wall , Stone, Concrete roof and Asbestos cement of any description and applayng two coat of Camouflage pattern weather proof exterior emulsion paint over a coat of primer all as specified and as directed.

M&L for preparation of old wooden joinery surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing ) and rubbish of premises complete all as directed.

Dismantling stone slabs or roof treatment of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and as directed.

Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&Lfor brushing neat cement slurry with 3.0 Kg of cement per Sq.meter complete all as specified and as directed.

M&L for10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and as directed

M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in Coping / Coving/padding concrete,mass concrete and the like complete all as specified and as directed.

M&L for priming surfaces in moderate conditions for laying APP membrane complete all as specified and as directed.

M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application complete all as apecified and directed (Primer shall be measured and paid separately) complete all as specified and as directed.

M&L applaying two coat of Aluminium paint over a coat of Aluminium red oxide over APP Membrane complete all as apecified and directed.

Demolition of stone slabs and chequered tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed).

Taking down steel tubing ( 15mm bore) and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge.

Taking down steel tubing ( 20mm bore) and connections in any position including cleaning for refixing or removal to store complete all as specified and as directed.

Dimolition and breaking up drain pipes ( salt glazedware, AC,Reinfoced concreet, PVC pipe) of internal dia upto110 mm bore, set in cement mortar and taking out of trenches if required complete all as specified and as directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub floor or hard standing rough finished surface complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and as directed.

M&L for vetrified ceramic tiles 10mm thick (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm and nexc .18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles complete all as specified and directed.

M&L for screed bed with CM (1:6) 15mm thick for laying floor tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the colour of tiles complete all as specified and directed.

M&L for rendering screed bed with CM (1:4) 10mm thick for laying wall tiles complete all as specified and as directed.

S&F GI tubing of 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C.

S&F GI tubing of 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C.

S&F in repairs 15mm Stope/Gate valve ,cast copper alloy,screwed down, high pressure,with crunch or butterfly handle ,screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F in repairs 20mm Stope/Gate valve ,cast copper alloy,screwed down, high pressure,with crunch or butterfly handle ,screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I and as directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I and as directed.

S & F in repairs 20 mm Brass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F in repair Vitreous China wash basin, white, flat back, size 450 x 300mm including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repairs Vitreous China bowl Urinal, flat back, size of 465x355x265mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet scouting pattern, white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device including trap set and necessary concrete complete complete all as specified and as directed.

S&F in repairs Vitreous China Sqatting pan Orissa Pattern Indian Type Size 580 x 440 with integral foot rest (excluding flushing cistern and flush pipe). Colour as desided by Engneer-n Charge complete all as specified and as directed.

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe complete all as directed by Engr-in-charge.

S&F waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/ flush tankfixed in repairs. complete all as directed by Engr-in-charge.

S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed.

S & F in repairs, waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.

S & F in repair CP gratings 100mm dia with or without waste hole of PTMT (mim weight 40 grms) complete all as specified and as directed.

S & F in repair CP grating Square or of any shape 150mm Size of PTMT (mim waight 100 grms) in weep holes , fixed in vertical surface upto a maximum height of 08 Mtrs from ground level complete all as specified and as directed.

S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) complete all as specified and as directed.

S & F 110 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.complete all as specified and as directed.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick including skirting over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments complete all as specified and as directed.

M&L for screed bed with CM (1:6) 20mm thick for laying floor tiles complete all as specified and as directed.

Removal of existing manual type Rolling shutters ,replacement of dammaged laths/panels/hoods ,easing, greesing and refixing in the same opening complete all as specified and as directed. Note : (cost of replaced laths/panels/hoods shall be measured and paid separatly).

S&F Steel rolling shutters with thicknes of each laths of 1mm thick,with out ball bearing ,as specified including top cover,anchoring rod ,hasp and staple and one shop coat of primer;erected in position as indicated,complete:push pull or manual type incuding removal of old dammaged rolling shutters complete all as specified and as directed.

Removal of existing Gear operated Rolling shutters ,replacement of dammaged laths/panels/hoods ,easing, greasing and refixing in the same opening complete all as specified and as directed. Note : (cost of replaced laths/panels/hoods shall be measured and paid separatly).

S&F Steel rolling shutters with thicknes of each laths of 1mm thick,with out ball bearing ,as specified including top cover,anchoring rod ,hasp and staple and one shop coat of primer;erected in position as indicated,complete:gear operated type with bevel gear box and crank handle type incuding removal of old dammaged rolling shutters all as specified and as directed.

S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters; covering to door shutters; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. as required complete all as specified and as directed.

S&F in repairs Safety lever locks mild steel with 4 levers for roolling shutters complete all as specified and as directed.

S&F in repairs Ball bearing for roolling shutters complete all as specified and as directed.

M & L for Collapsible steel gates side hung, considering of channel pickets , pivoted flat bars, top and bottom runners,handles etc, as specified,errected in position and securing runners with hold fasts and brackets, complete all as specified and directed by Engr-in- Charge incuding removal of old dammaged rolling shutters all as specified and as directed.

S&F for 30mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as specified and as directed.

S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as specified and as directed.

S&F 30 mm soft wood Glazed and skelton door or window shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge..

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs Aluminium (extruded section) floor door closer hydraulically regulated ,designation No.3, universal type, suitable for door shutter of 701 to 850mm in width and of weighjt between 61 to 80 Kg complete all as specified and as directed.

S&F in repairs Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and as directed.

S&F in repairs 100mm Aluminium Mortice lock 2 livers vertical type complete all as specified and as directed.

M&L Insulated PVC Wall & Ceiling Lining of 12.5mm thick consisting of PVC Panels Having expanded polystyrene (EPS) stuck to1.0mm thick plain colour PVC sheet duly fitted into the wall & Ceiling as per specifications and drawing complete all as specified and as directed.

S&F 2.5mm thik PVC sheet fillets of width upto 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed.

M&L for preperation of new plastered wall surface of any description and applying two coats of cement based paint complete all as specified and as directed.

S.R.M.K Enterprises

M/S S H KHAN ENTERPRISES

santulan & Company