KMC/WS/TPS/86/2025-2026

SECURE 3 PHASE, 1 ELEMENT, 4 WIRE 230 V DIGITAL POWER FACTOR METER. ELITE 440-446 WITH ETHERNET MODULE NO. OF PHASE / ELEMENT/WIRE 3 PHASE, 1 ELEMENT, 4 WIRE INPUT VOLTAGE -230 V; INPUT CURRENT -0 TO 5A, AC CLASSIFICATION (ACCURACY)- 0.5 SIZE OF THE METER ( IN MM X IN MM)- 96 X 96 ; DISPLAY -TYPE 7 SEGMENT RED LED DISPLAY

1 PORT USB TO SERIAL HUB, RS-232/422/485, PART NO UPORT1150

TELEPHONE CABLE WITH MULTI CORE SCHELD CABLE-10 PAIR

Schedule of Rates FOR Wiring in PVC Insulated and Sheathed Wire in EI Conduits/ GI Conduits By single core stranded Copper conductor Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit/GI conduit and painting 4x1.5sqmm wire in 25 mm conduit incl. S&F 2x10 SWG GI ECC EI Conduit

Finishing Copper Wire ends.(c)Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.2.5sqmm

Laying on Pole with Clamps.Fixing of Cable along the lentgh of O.H. pole incl. S & F MS pole clamps fabricated from 25 mm x 6 mm MS flat incl. painting

Laying on Wall / surface with Saddles / clamps.(b)Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying through RCC/Hume/GI Pipe.(a)Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench FOR single, 2, 3, 3... & 4 core

SUPPLYING & FIXING MEDIUM GAUGE GI PIPE ( ISI-MEDIUM) PROTECTION WITH NECESSARY FITTINGS AND JOINTING METARIALS AS REQUIRED 50 MM DIA

TERMINAL BLOCK 10 SQMM STUD SCREW, 57A 1100V (CONNECTWELL MAKE)

(H) Street lights : 5. Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland FOR upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC. 1. Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe, Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)g) 410 SP - 21 ; 8.5 Mtr., 129.00 Kg

Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc.Erection of single steel tublar pole up to 9m including ms sole plate (23m dia * 6 m thick) cap etc over flyover bridge etc with c.c foundation (4:3:1) WITH GRADED STONE CHIP (3/4'' DOWN) SURROUNDING THE POLE BASE 2''*2'' UP TO A HEIGHT OF 1.35M (4.1/2'') FROM THE POLE BASE WITH 2 COATS OF BLACK PAINT AND THEN FIXING THE POLE BASE WITH 2 COATS OF BLACK PAINT AND THEN FIXING THE POLE BY MEANS OF 3 NOS 4*1.1/2 *1/4 CLAMPS TO THE FENCING OF THE BRIDGE AT A SUITABLE DISTANCE AND PROVIDING THE PASSAGE OF WIRE/CABLE LEADING THROUGH HARD POLYTHENE PIPE (1.1/2) AND ALSO EBONITE SHEET 4-WAY EBONITE TERMINAL CONNECTOR BLOCK INCLUDING CONNECTION WITH LUG BY CRIMPING ARRANGEMENT AND ALSO NEAT CEMENTING OF POLE BASE AND FINISHING

Earth continuty condnetor Connecting the equipments to earth busbar including S & F GI (HOT Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Solid GI wire.No. 10 SWG

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Soil Excavation.Excavation of soil FOR installation of Earth Electrode and filling & ramming.FOR Soft Soil.

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(b)By TATA(Medium GI pipe

Earth busbar Supplying & fixing earth busbar of galvanized (HOT Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Earth busbar Supplying & fixing earth busbar of galvanized (HOT Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

ADD : 9% SGST

ADD : 9% CGST

ADD : 1% LWC