Special Repair of Judicial Courts in Mini Sectt. at Sirsa in Sirsa Distt. reinvited

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismatlled (HSR 8.18-a,b) Door

Window

Dismantling cement conglometate/terrazzo floors 25mm to 50mm thick without concrete base. (HSR. 8.26)

Scraping of white wash and colour wash. (HSR.8.32 (a)

Providing and fixing False Ceiling with grooves with 12mm to 15mm thick, 600mmx600mm best quality mineral fibre tiles of approved make fixed on M.S Steel runners frame i/c cost of screws , angles, cleats, rawel plugs, with taping and painting etc. complete in all respects as approved by the Engineer-in-charge. (HSR-13.93)

Bace Course of floors consisting of 100 mm thick cement 1: 8 :16 and 100mm sand or stone filing (HSR-14.1)

Providing & fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles, Note:- Tile shall be premium quality (First quality) of reputed manufacturar like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS.( HSR.14.89)

Providing & Fixing vitrified tiles of size 600mmX600mm or above size approved make in skirting or dado in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and joined with white cement slurry mixed with pigment to match the shade of tiles .Note:-tile shall be of premium quality( 1st quality) of reputed manufacture like NITCO, KAJARIA,SOMANI,ORIENT& JOHANSONS.(HSR:14.90)

Factory manufactured panelled door or glazed window, shutters of commercial hardwood such as hollock, champ, chikrassy and chaplash, etc. (non coniferous timber othe teak, conforming to I.S. specification No. 1003, kiln seasoned) with 100mm wide vertical styles, 150mm wide lock rail 200mm wide bottom rail, and 100mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/leates, stops, nails etc. complete fixed in postion (excluding the cost of an fittings other than specified above, but including labour for fixing the same in position):- HSR-17.90 (b) 35mm Thick

Factory manufactured wire gauze door shutters of commercial hardwood such as hollock, champ, chikrassy and chaplash, etc. (non coniferous timber othe teak, conforming to I.S. specification No. 1003, kiln seasoned) with 100mm wide vertical styles, 150mm wide lock rail 200mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc complete fixed in position (excluding the cost of an fittings other than specified above, but including labour for fixing the same in position):- HSR-17.92 (ii) 35mm thick

Factory manufactured soild flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screw, chocks/cleats and stops, etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (a)commericial veneering with vertical grains or cross bands and face veneer on both sides comercial facing with laminated core and lipped edges.(i)25mm thick (HSR. 17.93(a-i)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including the surface to required finish completeApplying pink primer of aluminium priming coat on wood work including preparation of surface, knotting and stopping etc.Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered of concrete surfaces to give an even shade (HSR. 16.1+16.2+16.3)

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR. 16.5)

Distempering with washable oil bound distemper (of approved manufacture) two coat on old distempered work (HSR. 16.60)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (J.K./ Birla). (HSR 16.81)

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick exceeding 40 sq dm. areas (HSR.18.30-b)

P/F Sound proof partical board 19mm thick complete i/c including cost of iron hold fasts,corner straps, screws,bolts fasts etc. (NS)

Recovery items: The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under :- Door @ Rs.400/- Each

Window @ Rs. 250/- P.cum Note: All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.

Providing and fixing in position best indian make , India type orissa or orya water closet suite for sinking into floor, with raised foot treads complete with 100mm H.C.I. P trap with or without vent as required and all other necessary fittings as fully described in item no. 30.1 above. (a) size 580 mm (i) white (HSR. 30.2 (a) (i)

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (a) single trap syphonic W.C. Suite (i) White [HSR 30.5 (a) (i)].

EXTRA OVER Item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARECISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings. (i) White (HSR 30.12 i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREEURINALS FLAT BACK OR ANGULAR LIPPED FRONT IN VITREOUS CHINA-WARE WITH ONE NO.10 LITRES CAPACITY best Indian make C.I. automatic flushing CISTERN WITH FITTINGS AND FLUSH PIPE ETC., COMPLETE AS FULLY DESCRIBED IN ITEM NO.30.19 ABOVE. 465 mm high (i) White (HSR 30.21-i)

EXTRA OVER AND ABOVE ITEM NOS.30.19 TO 30.22 ABOVE FOR PROVIDING AND FIXING PER SET LEAD ‘P’ TRAP AND 32MM LEAD WASTE PIPE WEIGHT 3.47 KG/METRE AND 2.8 MM THICK UPTO FLOOR LEVEL AND PLUMBER JOINT.(HSR 30.23)

EXTRA FOR PROVIDING AND FIXING VITREOUS automatic flushing CISTERN INCLUDING FITTINGS and brackets instead of C.I. flushing cistern COMPLETE. 10 Litres capacity cistern (HSR 30.37-b-i)

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of lavatory in vitreous chinaware size as given below (to the approvalof the Engineer-in-charge) including china plug for tap hole where necessary; RS or C.I Brackets for building into wall including painting; 32 mm C.P. Brass waste with C.P. brass chain and rubber plung; 15 mm C.P. Brass screw down piller tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings Best Indian make and; to the approval of the Engineer-in-charge. All brass work chromium plated and complete in all respects including cutting and making good the walls, floors and Painting of fittings etc.White (V) -size 560 mm x 450mm with one no tap (HSR. 30.41-white-v)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with CP Brass screws complete in all respects INCLUDING CUTING AND MAKING GOOD THE WALLS ETC. (a) C.P. Brass (HSR-30.67 (a)).

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embeded in walls with C.P. brass screws complete in all respect including cutting and making good the walls etc.(a)-25 mm dia C.P. Brass Adjustable (i)750mm long.( HSR.30.68-a-i)

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWAL PLUGSWITH C.P.BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOODS THE WALLS ETC. (a) With C.P. brass brackets and guard rail (ii) 530 mm X 125 mm (HSR 30.69-a-ii)

Providing and fixing in position best Indian make believed Edge 5.5 mm Thick Mirror mounted on Asbestos sheet Ground FIXIED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR. 30.71)(a) INDIAN MAKE (i) 600 mm x 450 mm (HSR 30.71-a-i)

Providing and fixing in position superior quality 65mm i/d opening C.P. brass dome type hinged grating weighing about 750 gms. Fixed in cement mortar 1:2 complete in all respect (as required by the Engineer-in-charge) (as required by the Engineer-in-charge) (HSR. 30.74)

Providing and fixing in position superior quality 65mm i/d opening C.P. brass dome type hinged grating weighing about 750 gms. Fixed in cement mortar 1:2 complete in all respect (as required by the Engineer-in-charge) (as required by the Engineer-in-charge) (HSR. 30.74)

Providing and fixing in position 15mm i/d C.P brass bib cocks of best quality (as required by the Engineer-In-Charge) (a) Bib cock long body( HSR.30.75-a)

Providing and fixing in position best Indian make C.P. brass wall mixer 15 mm (a) with telephonic shower (HSR 30.81-a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION (a) Aluminium (iii) 15 mm X 450 mm [(HSR-30.82(a-iii)]

Providing and fixing in position C.I. gully trap cover weighing approximately 7.26 kg. and frame for gully trap chamber clear and frame for gully trap chamber clear opening size 300mm x 300mm and out side size 330mm x 330mm i/c painting the exposed surfaces with 3 coat of black bitumastic superior paint of approved manufacture etc.( HSR. 30.85)

PROVIDING AND FIXINGIN POSITION M.S.OR HEAVY FLAT IRON CLAMPS made out of M.S. flat not less than 5 mm of the approved design for fixing C.I. SOIL WASTE vent or anti pipes to walls COMPLETE IN ALL RESPECTS INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS ETC., AND PAINTING. (HSR 30.88-a,b) (a) For 100 mm internal diameter pipes

(b) For 75 mm internal diameter pipes

Providing and fixing HCI floor traps ISI marked of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete1:2:4 under all arround the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc.minimum depth of water should be 150 mm with a minimum seal of 50mm (HSR. 30.89-a,b) (a) With 50 mm i/d outlet

(b) With 75 mm i/d outlet

Providing and fixing in position auto matic brass ball valves in tanks-a-with copper ball-ii-20mm internal diameter(HSR.30.110-a-ii)

Providing and fixing HDPE water storage tanks of sintex, diplast o.k. supreme make with covers/lids marked with IS 12701 on roof top of building i/c cost of hoisting and placing in position making connections with inlet and outlet pipes providing overflow and scour provisions with suitable plug on scour pipe i/c cost of nipples, washers, flanges, for connections in tanks complete in all respect to the satisfaction of Engineer-in-charge. 1000 Ltr. Capacity (HSR.30.119)

Providing and fixing Gate Valve (N.S.)

Providing and fixing Angle Valve (N.S.)

Nitish Kumar Contractor