Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.0 Cr
EMD Value
₹6.0 L
Closing Date
22 Aug 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Hubballi Dharwad Urban Development Authority
S B Doddamani
Improvements to Approach road of Lakkamanahalli R.S.No 165A 166 HDUDA Residential Layout of Dharwad Tq and Dist
HDUDA/2024-25/OW/WORK_INDENT22/CALL-2
HDUDA/2024-25/OW/WORK_INDENT22/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
HDUDA Commissioner Office Dharwad
16 documents required · 16 mandatory
Valid contractor license certificate issued from competent authority PWD Contractor Class 2and Above
Line of Credit i.e. 30% of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document (Rs 164.71 lakhs)
ITR Returns filed Copy in the name of the participating bidder
balance sheet tallying the Annual Turn Over during the previous five years in the name of the participating bidder
Work Done Certificates for the Work performed as Prime Contractor (in the same name) on works of similar nature during the five years specified (Similar nature of Work done certificate i.e. 50% of amount put to tender) (Rs 234.00 lakhs)
The Work Done Certificates for the Quantities of work executed as prime contractor (in the same name) during the last five years specified along with the details in the format as in the bid document. GSB/WMM/WBM - 6682.56 Cum BM/SDBC/DBM/BC- 823.20 Cum.
The information items of equipment are considered essential for successfully carrying out the works. The Tenderer should furnish all the information along with the details in the format as in the bid document, The Valid Registration Certificates issued by concerned competent Regional Transport Officer should compulsarily be attached for moving vehicles (Owned/Leased/Agreement) For other vehicles the valid invoice copy should be attached. Excavator- Hire 01, Tippers-Own 02 and Hire 02. Hot Mix with plant (Minimum capacity of 40/60 TPH)-own 01, Asphalt Paver finisher-Own 01, Static Roller (8-10 Tones)-Own 01, Vibratory Roller-Own 01.
Valid PAN Card of the Participating Bidder
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with the details in the format as in the bid document
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (B) Works for which Tenders already submitted: along with the details in the format as in the bid document
Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person & Designation, Contact Number Office Landline / Mobile, and valid email ID
Notary Self Attestation regarding Agreed to Terms and Conditions as per (bid document) kw4 on face value of Stamp Paper not less than Rs 500
Notary Affidavit Declaration that the bidder has not been blacklisted on Stamp paper of Face Value not less than Rs 500
profit and loss statement in the name of the participating bidder
List Valid GST Registration Certificateof Financial Resources with Certificates
Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details (achieved in at least two financial years a minimum financial turnover of Rs 936.00 Lakhs)
₹5,000
₹6.0 L
2 Aug 2025
2 Aug 2025
25 Aug 2025
14 Aug 2025
16 Aug 2025
Improvements to Approach road of Lakkamanahalli R.S.No 165A 166 HDUDA Residential Layout of Dharwad Tq and Dist
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Cutting of Trees, excluding removal of stumps and roots of trees (i) Girth from 300 mm to 600 mm
Cutting of Trees, excluding removal of stumps and roots of trees (ii) Girth from 600 mm to 900 mm each
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...
3.4 305.4.3 Scarifying the existing Granular surface to a depth of 50 mm by Mechanical Means using Hydraulic excavator
Preparation and Surface Treatment of Formation Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimmi...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10 MSA & for Residential...
5.1 502 A (i) Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at ...
5.3 503 (i) Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surfa...
5.8 504 (ii) Bituminous Macadam Grading - II for traffic less than 20 MSA , C Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified gradin...
Semi Dense Bituminous Concrete 1 IRC-37: 2018 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixe...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
2.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge.(The cost of P...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work, Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015...
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed ove...
Maintenance of WBM Road Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per technical specification Clause 1907
Fabricating, supplying and erection of.ms longhot dip Galvanized ctagonal hot dip Polewith BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,includin...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Double Arm Bracket with 1500 mm Standa...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires
Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 3 Rating and as per IS 13947.25 A
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying,fixingandwiring3PhaseDigitalAmmeter/Voltmeter
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and paintedwith 2 coats of red oxide and then two coats of approved paint. 50 x 50...
Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip
HDPE/PLB Pipe 50/42 mm
HDPE/PLB Pipe 40/33 mm
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Percentage Additionalities for Formwork,
Centering & Scaffolding ,1 Foundation upto Plinth b. All other types
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Percentage Additionalities for Formwork,
Centering & Scaffolding ,1 Foundation upto Plinth b. All other types
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DT&CP_LTC_Hubballi_ 19-07-2025.pdf
Others - Proceeding copy • 0.22 MB
Lakamanhalli road drawings.pdf
Others - Drawings • 1.59 MB
KW 4 Lakamanahalli Road INDENT22 Call2.doc
Tender Document • 3.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .