REPAIR/ REPLACEMENT OF FLOOR, ROOF, SUNKEN PORTION, PLINTH PROTECTION, JOINERY, PLUMBING LINE, SANITARY FITTINGS AND MISC WK AT EME WKSHOP ASW, AC DEPOT, AC RECORD, 58 ASC SUPPLY COY, AUTO REGT MD ACCN AT BURKI ROAD, RANJIT ROAD ANDOTM ACCN OFGE OF

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor all as directed.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

M&L for joint free / rectified non skid ceramic coloured tiles non skid, 8-10 mm thick of size 395mmx395mm as approved by GE (square / rectangular) as in floor etc laid over and including screed bed 20 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. .

M&L for coloured glazed ceramic tiles digitally printed premium series of size 300mmx450mm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Vitrified Ceramic tiles 10 mm thick dark colour (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. Over and including 15 mm thick screed bed in cement morter 1:6

-Ditto- all as per Sr item No 06 above but on skirting.

M&L for Digitally printed paver tiles of size 300 mm x 300 mm having thickness of 10 mm as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M & L for Chequred cement concrete tiles withgrey pigment cement and pigment of size 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M&L for machine cut Kota stone slab 20 to 25mm thick (minimum size 30cm x 45cm) as in flooring, laid over and incl cement screed bed 15mm thick in cement mortar 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified

M&L for rough dressed shahabad stone, 30 mm thick laid over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed pointed in cement mortar 1:3 all as directed.

-ditto- all as per sr item No 12 above but except rough dressed shahabad stone.

M&L for 20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in, Set in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge including demolition

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement all as specified and directed.

S&F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge all as directed.

M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified as in roof coverin/cladding t wall fixed with self tapping screwas as specified

M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified as in roof coverin/cladding t wall fixed with self tapping screwas as specified

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.

Preparing unplastered or plastered old surfaces and applying two coats of oil bound distemper on wall including smooth roller finish complete all as directed.

Preparing unplastered or plastered old surfaces and applying one coats of oil bound distemper on wall including smooth roller finish complete all as directed.

Preparing old unplastered or plastered surfaces and applying two coats of cement based paint on walls all as directed.

Preparing old unplastered or plastered surfaces and applying one coats of cement based paint on walls all as directed.

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) all as directed.

Taking down chowkats or frames n exc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each

Supply and fix Factory made single extruted WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frames chowkat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum and screw withdrawal strength of 2200 N (face) ( 1100 N (Edge), minimum compressive strength 58 N /mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge

Supply and fixing Factory made single extruted WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) ( 900 N (Edge), minimum compressive strength 50 N /mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixing with stainless steel butt hinges in position with MS hold fast/lugs/SS dash fasteners all as per Engineer-in-charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face

Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long.

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long.

Supply and fix aluminium anodised handles of extruded section 150mm long.

M&L for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed.

M&L for one coats of synthetic enamel paint for old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed.

M&L for one coat of synthetic enamel paint for old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.

Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc all as directed.

Supply and fixe in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .

S&F in repairs for Vitreous China bowl urinal flat back size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe ad waste pipe)

S&F in repair wall mixture (3-in-1), with provn for overhead shower all as directed of Cat Part No F1015403 of CERA

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as directed.

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed. Make- Cat Part No F1015151 of CERA

Supply and fixing in repairs Stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make-F1015361 of CERA

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.Make cate part No F1015101 of CERA

Supply and fix in repairs, shower rose with shower arm

S&F in 10 mm thick toughen glass for shelves in corner.

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas specified

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm.

M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as directed.

Supply and fix in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples all as directed.

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality.

S&F in repairs PVC connections 15 mm size with Stainless steel Nuts of length 600mm

S&F in repairs for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore

S&F for low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/fixed to wall

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed.

Taking up or down steel tubing and connections,15 mm bore

--ditto-- all as per Sr item No 69 above but 20mm bore

Supply and fixing 15 mm bore 3 Layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors.

--ditto-- all as per Sr item No 71 above but, 20 mm dia bore etc.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc

M&L for 2 mm thick wall care putty on wall (One layer) etc complte all as specified and directed by Engineer-in-Charge

S&F PVC Mirror Cabinet Make Cat Part No 555 of Prayag or equivalent in Polytuff

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 8mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and all as directed

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge (a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface. (b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech

M&L for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

S&F for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

M&L in repairs POP suspended ceiling using appropriate size tiles ( 10 mm thick ) support members using GI section of 26 gauge suspended by GIO holder from the slab/ beam in line and level as per design as approved finishing, cleaning and filleting side with suitable moulding, cleaning the site including taking existing etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC 1:2:4 (Nominal Mix) B-1 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

Cutting chases, pinning in, in brick work/stone work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

Supply and fix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting complete all as specified and directed.

--ditto-- all as per Sr item No 86 above but 1000 ltrs etc.

Dismantling fencing wire mesh, any type

M&L for Precast RCC Column & Plate M-20 grade (Column-150x150mm with 4 nos Main bars of 6mm dia) and Plate 1800x300x75mm with 4 nos of wire of 4 mm dia) including fitting, distance between two coloums n exc 1.80 mtr and additonal column required for each corner etc complete excn for column and PCC 1:3:6 around Column base all as specified and directed

MS. G.A. CONSTRUCTION (BID ID -3154905)

HG PATHAN CONSTRUCTION COMPANY (BID ID -3154235)

Neha Enterprises (BID ID -3155509)

Arihant Construction (BID ID -3154937)

Priyadeep Construction (BID ID -3154924)

M/s. N D Karande (BID ID -3155749)

MATOSHREE CONSTRUCTION (BID ID -3155900)

Ms. M.D. Auty (BID ID -3155278)

Bidder Name

Ms. M.D. Auty