Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical technically qualified |
| 2 | Accepted-Technical | Accepted-Technical technically qualified |
| 3 | Accepted-Technical | Accepted-Technical technically qualified |
| 4 | Accepted-Technical | Accepted-Technical technically qualified |
| 5 | Rejected-Technical | Rejected-Technical technically not qualified |
Tender Value
₹9.0 Cr
EMD Value
₹22.4 L
Closing Date
13 Apr 2026, 3:00 pmClosed
Executive Engineer (Ele)
Electrical Division Office Kavaratti.
Supply, Transportation, Installation, Testing and Commissioning of 5 nos of new DG sets of capacity 1x1500kVA, 4x1010kVA and 1x320kVA including acoustic hood with all associated accessories at Kavaratti, Kalpeni, Agatti, Kiltan and Bitra Islands
2026_UTL_3261_1
F.No.86/1/2025-ELE
Open Tender
Electrical Goods/Equipments
Item Wise
120 days
kavaratti
Please refer Tender documents.
26 documents required · 26 mandatory
₹0
₹22.4 L
Yes
kochi or by VC
12 May 2026
7 Mar 2026
14 Apr 2026
7 Mar 2026
13 Apr 2026
7 Mar 2026
24 Mar 2026
DG set and Accessories
Design, Engineering, Supply, Installation and Commissioning of 1 x 1500 KVA, 415Volts DG set with complete accessories in full at Power House, Kavaratti Island (Cost including GST)
Design, Engineering, Supply, Installation and Commissioning of 3 x 1010 KVA, 415Volts DG set with complete accessories in full at Power House, Kalpeni, Agatti & Kiltan Islands (Cost including GST)
Design, Engineering, Supply, Installation and Commissioning of 1 x 320 KVA, 415Volts DG set with complete accessories in full at Power House, Bitra Island (Cost including GST)
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
DG set and Accessories
Design & Engineering of 1500 KVA, 415Volts DG sets and complete accessories in full shape suitable for continuous operation (Prime Power), including battery, battery charging system, DG control panels, acoustic enclosure, coil cooler etc. as per the specification including civil work. Engine : Cummins/MTU/Volvo/Caterpillar (Only genuine Caterpillar brand; no other sub-brands). Alternator : Stamford.
DG Set Control & Instrumentation Panel (Remote)
Exhaust pipe: MS Exhaust Pipe, its Fittings, Painting with 2 coats of heat resistance antirust epoxy paint suitable to exhaust temperature, glass wool insulation of suitable thickness (50mm Min.) covered with 26SWG Aluminium Cladding etc. for exhaust piping.
Chimney (H-14M): MS support system suitable for exhaust pipe, residential silencer, etc. using angles/ channels, steel sections, U Clamps etc. complete with one coat of zinc chromate primer and 2 coats of black enamel paint.
Single core 400sq.mm copper LT UG Cable (DG to Control Panel) including cable laying, route marker, glands, lugs, and other accessories with termination.
Control Cables including cable laying, route marker, glands, lugs, and other accessories with termination.
Civil work, including foundation for DG sets and exhaust stack
Earthing
Packing & Forwarding including insurance, transportation charges etc. up to the site (Power House)
Charges for Erection, Testing and Commissioning at the Sites
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
DG set and Accessories
Design & Engineering of 1010 KVA, 415Volts DG sets and complete accessories in full shape suitable for continuous operation (Prime Power), including battery, battery charging system, DG control panels, acoustic enclosure, coil cooler etc. as per the specification including civil work. Engine : Cummins/MTU/Volvo/Caterpillar (Only genuine Caterpillar brand; no other sub-brands). Alternator : Stamford.
DG Set Control & Instrumentation Panel (Remote)
Exhaust pipe: MS Exhaust Pipe, its Fittings, Painting with 2 coats of heat resistance antirust epoxy paint suitable to exhaust temperature, glass wool insulation of suitable thickness (50mm Min.) covered with 26SWG Aluminium Cladding etc. for exhaust piping.
Chimney (H-14M): MS support system suitable for exhaust pipe, residential silencer, etc. using angles/ channels, steel sections, U Clamps etc. complete with one coat of zinc chromate primer and 2 coats of black enamel paint.
Single core 400sq.mm copper LT UG Cable (DG to Control Panel) including cable laying, route marker, glands, lugs, and other accessories with termination.
Control Cables including cable laying, route marker, glands, lugs, and other accessories with termination.
Civil work, including foundation for DG sets and exhaust stack
Earthing
Packing & Forwarding including insurance, transportation charges etc. up to the site (Power House)
a) Charges for Erection, Testing and Commissioning at the Sites
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
DG set and Accessories
Design & Engineering of 320 KVA, 415Volts DG sets and complete accessories in full shape suitable for continuous operation (Prime Power), including battery, battery charging system, DG control panels, acoustic enclosure, coil cooler etc. as per the specification including civil work. Engine : Cummins/MTU/Volvo/Caterpillar (Only genuine Caterpillar brand; no other sub-brands). Alternator : Stamford.
DG Set Control & Instrumentation Panel (Remote)
Exhaust pipe: MS Exhaust Pipe, its Fittings, Painting with 2 coats of heat resistance antirust epoxy paint suitable to exhaust temperature, glass wool insulation of suitable thickness (50mm Min.) covered with 26SWG Aluminium Cladding etc. for exhaust piping.
Chimney (H-14M): MS support system suitable for exhaust pipe, residential silencer, etc. using angles/ channels, steel sections, U Clamps etc. complete with one coat of zinc chromate primer and 2 coats of black enamel paint.
Single core 400sq.mm copper LT UG Cable (DG to Control Panel) including cable laying, route marker, glands, lugs, and other accessories with termination.
Control Cables including cable laying, route marker, glands, lugs, and other accessories with termination.
Civil work, including foundation for DG sets and exhaust stack
Earthing
Packing & Forwarding including insurance, transportation charges etc. up to the site (Power House)
a) Charges for Erection, Testing and Commissioning at the Sites
stage.html
html • 0.03 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 18.31 MB
BOQ_3705.xls
BOQ • 0.37 MB
Corrigendum.pdf
PDF • 0.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .