REPAIR TO FENCING, PATH, WALL, CULVERTS, DRAIN ETC IN ZONE A AND ZONE B AT DAMANA UNDER GE JAMMU

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing unserviceable material outside Cantt area complete all as specified and as directed by Engr-in-Charge.

Demolition of brick masonery built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in copings etc and in similar works including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in cement mortar 1:4 on bricks or concrete surface and finished even and smooth without using extra cement including WPC complete all as specified and as directed.

M&L for brick work of old size sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

All as per Ser item No 7.00 here-in-before but except bricks complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside Cantt area complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and as directed. (including necessary scaffolding lifting arrangement for external surfaces).

M&L for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and as directed.

M&L for applying one coat of cement based paint including preparation of old plastered surface complete all as specified and as directed.

M&L for formwork to faces of walls of drain, including pillasters, butteresses, vertical or batter complete all as specified and as directed.

M&L for Precast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and as directed.

M&L for mild steel TMT 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repairs galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed. Note:- Each line wire to be measured.

Restraining and resecuring including making good staples etc galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed. Note:- Each line wire to be measured.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire; flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Fixing only posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire; flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Erection and fixing only Framed work as in doors or gates of angle ot other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old steel surfaces of any description otherwise described over 10cm width or girth including preparation of surface complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new steel surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and as directed.

M&L for cement concrete in foundation, filling and mass concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and as directed.

M&L cement concrete 100mm thick in 1:2:4 type C-2 (using 40mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and as directed.

M&L cement concrete 50mm thick in 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in flooring finished even and rough complete all as specified and as directed.

M&L Factory made precast hand crafted chequered cement concrete M-40 grade coloured tiles 30cm X 30cm X 22mm thick, polymer moulded set, jointed and pointed in neat cement slurry in floors with white cement and pigment over and including screed bed and bedding layer of mortar 20mm thick in cement plaster (1:4) for laying floor finishes as per design / pattern approved by Engr-in-Charge.

Jagbir Singh and Co

Mehta Enterprises

M/S R S CONSTRUCTION CO

VISHAL CONSTRUCTION

Bidder Name

M/S PRAJAPATI ENGINEERS

Jagbir Singh and Co

VISHAL CONSTRUCTION

M/S R S CONSTRUCTION CO

Mehta Enterprises