SPECIAL REPAIRS TO BLDG NO P 5 AT 25 POLO ROAD UNDER GE EAST DELHI CANTT 10

Amount

Taking down cement or lime plaster any description on brick or stone walls, ceilings etc including recking out joints hacking for key scrubbing down with waters and removal of rubbish from the premises as directed.

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n. exc 15cm thickness ( below or above ground level)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed

Complete removal of existing treatment of walls and preparation of old plastered surfaces of wall and applying 1 mm thick wall care putty to get the surface even and smooth for applying the required wall finishes complete all as specified and as directed.

All as per item No.5 above but on ceiling surfaces.

Rendering 15mm thick in cement mortar 1:6 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified.

All as per item No. 7.00 above but 5mm thick in CM 1:3 on ceiling surfaces.

Rendering 15mm thick in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of new plaster surfaces of wall and applying 1 mm thick wall care putty to get the surface even and smooth for applying of required wall finishes complete all as specified and as directed.

All as per item No.10 above but on ceiling surfaces.

M&L for preparation of old plastered surface of wall and applying two coat of plastic emulsion paint over a coat of priming paints plaster coat complete all as specified and as directed.

M&L for preparation of old plastered surface of ceilings and applying two coat of plastic emulsion paint over a coat of priming paints plaster coat complete all as specified and as directed.

All as per item No.12 above but new surfaces.

All as per item No.13 above but new surfaces.

M&L for complete removal of existing treatment of walls and applying two coat of weather proof exterior emulsion paint white or tinted on walls over one coat of exterior wall primer etc all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of weather proof exterior emulsion paint white or tinted (any required colour ) on walls over one coat of exterior wall primer etc all as specified and directed.

Taking down shutters of any description exc.1.00sqm and n. exc 2.00 sqm each and refixing in the same opening.

Taking down shutters of any description n.exc.1.00sqm sqm each and refixing in the same opening.

Taking down chowkat or frames exc. 1.5 sqm and n. exc 4.00 sqm each with shutters (without taking off shutters from frames).

Taking down chowkat or frames n. exc. 1.5 sqm each with shutters (without taking off shutters from frames).

M&L powder coated 60 micron thick anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as spesified and directed.

M&L anodised aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over two track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 5mm thick tinted/ plain glass in panels incl all fitting and fixture complete all as spesified and directed .

S&F curtain rod of stainless steel fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed complete.

M&L for galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed in repairs with tinned tack or galvanised wire staples or fixing with beads all as specified and as directed complete..

M&L anodised aluminium grill weight exc 2.50 kg/Sqm and n.exc 3.5kg/Sqm with all fittings& fixture complete all as spesified and directed .

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

M&L for granite (of any type) work ( table rubbed and polished ) in steps, jambs,pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Vitrified coloured ceramic tiles 10mm thick dark shade ( Square / rectangular) polished, area of each tiles exc 0.36 sqm and n.exc 0.80 sqm in floors etc, laid over and including 20 mm thick cement screed in cm 1:6, set and jointed in neat cement slurry and pointed pointed in white or coloured cement to match complete all as specified and as directed.

M&L joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.18 sqmm but not exceeding 0.38 sqmm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over & including 15mm thick screed bed in CM (1:6) complete.

M&L for Glazed ceramic coloured tiles in vertical surface 600x300x7 - 10mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over & including10mm thick backing coat in cm 1:4 complete.

M&L for marble of any shade other than white and black ( green Marble ) 18 - 20 mm thick ( table rubbed and polished ) in steps, Jambs,pillars, Cooking platform, floor and like in cement mortar (1:4) including pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble laid over 20mm thik screed bed in CM 1:6 , bedded, jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.

S&F block boards, grade 1 quality, interior grade 12mm thick decorative type with decorative face veneer on both face with leaping Ffixed on timber frame work complete all as specified.

S&F block boards, grade 1 quality, interior grade 18/19mm thick decorative type with decorative face veneer on both face with leaping as in cupboard shutters complete all as specified.

S&F in 1st class Hard wood beading straight ( any size ) for glazed or gauzed joinery , renewed , including mitres etc, and removing old beeding.

S&F aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30mm width complele all as specified and as directed.

Taking up or down steel tubing and connections 15mm dia including cleaning for refixing and removal to store compete all as specified.

Taking up or down steel tubing and connections 20mm dia including cleaning for refixing and removal to store.

Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. (Note: Necessary cutting chases, pinning in and making good will be measured seprately).

Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling all as specified and as directed.

M& L for cement concrete 25mm thick type B - 0 using 12.5mm graded stone aggregate over sub base to receive floor finish or as in levelling course etc complete all as specified.

Supply only Integral Water proofing compound.

M&L Second class hard wood plain, solid, chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints

Material and labour for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass gauge etc ,devided in to squares, with plain chamfered or rounded mitred and rebated sash bars any numbers. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L for butt hinges Medium weight cold rolled mild steel 100mm long complete

M&L for small articals such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-310-0 or Fe-410-0

M&L for Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

M&L for 150mm length of Aluminium anodised barrel tower boltes of extruded section complete.

S&F mild steel 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L Aluminium alloy anodised sliding door bolt 300 mm long with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base 75mm thick complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C - 2, using 40mm graded stone aggregate as in plinth protection and other similar work finishing the surface even and smooth without using extra cement.

Forming Contraction ( Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for chequered cement concrete tiles 25mm thick fixed including 20mm thick screed bed or bedding layers of mortar in CM 1:6 with grey cement and pigment to match complete all as specified.(make :- Altra or equivalent from list)

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth complete.

M&L for broken stone or boulder hard core of gauge not exc 63 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete.

S&F Vitreous china wash down water closet pan wall hung Make Jaquar Model No: WC FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360 545x365 set jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed.

S&F vitreous china urinal of of Make Jaquar Model No:cat No. URS-WHT-0704 of size 710 x 485 x 300 mm with Sensotronic sensor SNR - CHR - 51097 flushing valve for urinal with complete kit and equivelent with all fitting and fixture complete all as specified.

S&F vitreous china wash basin over counter table top type size 130x640x490mm Make Jaquar Model No: cat No - JDS - WHT- 0546 or eqvilent fixed over granite slab with all fitting and fixture complete all as specified.

S&F in repairs fancy type central hole mixer ( basin mixer)single liver mixter with popup waste and 450 mm longbraided hoses, cast copper alloy with chromium plated screwed down high pressure screwed for iron pipe,15mm bore complete all as spd. (Make Jaquare) Cat No. ARI - 39051B or equivalent from list. .

S&F in repairs concealed stop cock, cast copper alloy with crutch or butter fly handle fancy type chromium plated , (concealed type) screwed for iron pipes 15mm bore complete all as spd. Make - Jaguar Cat No - CQT 23089 or equivalent from list.

Supply and fix in repairs cast copper alloy chromium plated angle cock, of 15 mm bore complete all as specified and directed. ( Make - Jaquar ) Cat No - FLR5053 N or equivalent from list.

S&F Towel Rail 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats . ( make - jaquar Cat No. AKP - 35711P or equivalent from list.

S&F Towel Rack 600mm long without lower hanger of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats. (Make- Jaquare) Cat No. AKP - 35781PF or equivalent from list.

S&F in repairs Chromium Plated grating doom 125 mm dia ring type with or without waste hole complete.

Supply and fix in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

Supply and fix in repairs for PVC waste pipe with 32 mm bore and 70 cm long complete all as specified and directed.

S&F looking mirror fancy type size 900x1200mm mounted on 6mm thick PVC sheet and aluminium frame / modular teak wood finish beading all around incl fix with necessary fixing arrangement complete.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm with all fitting and fixture complete all as specified and directed fixed.

Supply and fixing 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed.

S&F in repairs cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified .(Make- Jaquare) Cat No- AKB - 35751 or equivalent from list.

Supply and fixing 75mm dia outlet PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all specified and directed.

S&F corner glass self with CP bracket. ( Make : jaquare code : ACN - 1173 or equivalent from list.

S&F in repairs flushing jet for pedestal pattern water closet including flexible pipe complete all as spd.

S&F in repairs health faucet chromium plated brass completed all as spd Make - Jaguar cat No-ALD573 or equivalent from list. .

S&F 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F bib taps,15mm bore cast copper alloy make jaquar , screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.Cat No. FLR 5047N make Jaquar or equivalent from list.

S&F in repairs fancy type single lever sink mixer with 210mm extension body swinging spout without popup waste ( table mounted)with 600 mm long braided house screwed for iron pipe,15mm bore complete all as spd. (Make Jaquare) Cat No.FLR 5009 B or equivalent from list.

S&F in repairs wall mixer 3- in - 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,Hand shower 105mm dia round shape single flow with air effective(ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd. (Make Jaquare ) Cat No : FUS- 2928, OHS - 35495, SHA- 549D8, HSH 1775 & Cat No. SHA- 455L400 respectively or equivalent from list.

Taking down rain water /eaves gutters and vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls etc complete all specified and directed.

Supply and fixing SWR Junction single ,(single T) equal or un equal provided with access door 100/110mm complete all specified.

Supply and fixing SWR bends (any radius) 110mm complete all specified.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all specified and directed.

Supply and fixing SWR bends (any radius) 110mm provided with access door complete all specified.

S&F PVC ( SWR ) 75mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F PVC ( SWR ) 75mm bore pipes single socketed in any length with rubber ring joints, fixed to walls

Supply and fixing SWR bends (any radius) 75mm bore, complete all specified.

Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil.

Removing excavated material to distance n.exc 50M deposited where directed at a level n.exc. 1.5M above starting point.

S&F Machine pressed precast concrete interlocking glazed paver block with grey cement and pigment of any shape and size conforming to IS 15658 - 2006 of 60 mm thickness and M - 35 grade including 50 mm sand cushion including packing joints etc complete all as specified and directed.

Dismantling boarding, any description, fixed any position with with screws complete all as specified.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC 1:2:4 typeB- 1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in similar work.

Cutting openning through brick wall built in CM for door window and other openning including removing the rubbish not exc. 50M complete all as specified.

Demolation and breaking up 150mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified.

Concrete bed to drain pipes in PCC 1:4:8 type D-2 using 40mm grade stone aggregate to drain pipes including forming cradels for 150 mm dia bore pipe complete allas specified and directed.

S&F reinforced concrete pipes class NP2 150mm bore laid and jointed complete with collars complete all as specified.

Cutting into existing manholes on connection of new drain pipe for 150mm dia making good to pipe and rendering branch channel half round or 3/4 section in cement concrete 1:2:4 mix type B-1

M&L for providing 15mm thick rendering in cement mortar 1:4 and admixed with water proofing compound as per manufacturer instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note : - WPC will be measured and paid seprately.

Material and labour providing precast Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manhole cover slabs chajjas,shelves and similar work including necessary form work etc.,complete all as specified. Note :- reinforcement shall be measured and paid separately.

M & L for cement concrete type B 1, 1:2:4 (using 20 mm graded stone aggregate as in coping, apex stone, bed plate or in blocks for fixing of hold fast etc including wethering slightly rounded or chamfered angles and necessary form work complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks in cm 1:4 stright or curved on plan exc 6m mean radius complete all as specified and as directed.

All as per item No.108 above but half brick thick wall in cm 1:4 complete all as specified.

S&F PVC (SWR) vent cowl 110mm complete all as specified.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types laid over 20 mm thick cement mortar 1:6 complete all as speified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed. Note: Supporting frame shall be measured and paid separately.

All as per item No. 112 above but on curved surfaces.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & n.exc 1000 ltrs lowering from its position and removal to store. complete all as specified and directed.

Dismantling existing water tanks of capacity exc 250 & n.exc 500 ltrs lowering from its position and removal to store. complete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

M&L for fixing of modular kitchen fittings with laminated wood work and stainless steel baskets of required size mounted on suitable channels including ball bearing to moving of baskets smoothly including all necessary fittings and fixture complete all as speified and as directed. Make - Kohler, Hettich and Godrej.

Dismantlibng wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Joist, Channel, angle,or tee sections, fixed independently without connecting plates, etc.( cut to ordinary lengths ie with in 20mm of the length indicated) complete all as specified conforming to 410 - W(Gde E - 250 quality A).

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide primer. complete all as specified and as directed.

M&L for preparing of new /old plastered surface of wall / ceiling and applying texture paint with mixture of sillica sand as per manufacturer instruction to achived the desired texture finishes of any shade of one or more colours required including all necessary application like preparation priming surface complete all as specified and as directed complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as directed.

M&L in replacement for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as directed for the following :-(Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.): Make of copper wire :- RR Kabel/Havells/Polycab

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

Material and labour in replacement for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as directed. Make : Standard/ Havells/RR Cable. Note : The PVC Conduit and conduit accessories shall be measured and paid separately .

All as per srl item No 125 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 15 Amp light point.Note : The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit pipe.Make of copper wire :- RR Kabel/Havells/Polycab

M&L in replacement for Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

M&L in replacement for Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

M&L in replacement for of Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

M&L in replacement for Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S & F in replacement of Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.

Supply and fixing in replacement of Modular TV socket (RJ 11 Socket Jack) 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.

Material and labour in replacement for laying of LT underground cable XLPE insulated, PVC sheathed, galvanised steel strip / wire armoured, aluminium conductor, 1100 volts grade, of size 25 Sqmm 4 core suitable for earthed system laid in duct / trench / along pole / wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

M&L in replacement for Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

M&L in replacement for Sub main wiring with 2 run of 6 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

Supply and fixing in replacement of of MCCB Incommer Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replaement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of Modular AC Box, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SPN, C Curve type of capacity 32 Amp, 10 kA complete all as directed. Make : Havells / L&T / Standard.

S & F in replacement of MCCB 3P 160 Amp, with breaking capacity 25 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.Make : Havells / Legrand Lexic/ Hager

Supply and fixing in replacement of MCB C Curve type, 10 KA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of LED tube light fitting 22 W to wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified.

S & F in replacement of Mirror light 12 Watt (Fancy Type LED) complete all as specified and directed.

S & F in replacement of round recess mounting downlight slim type, LED luminaire light 15/16 W cool white , input voltage 230 Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of round recess/surface mounting downlight slim type, LED luminaire light 6 W cool white , input voltage 230Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of round recess/surface mounting downlight slim type, LED luminaire light 12 W cool white , input voltage 230Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of square recess/surface mounting downlight slim type, LED luminaire light 18W cool white , input voltage 230Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of round recess mounting downlight slim type, LED luminaire light 3W warm white , input voltage 230Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of wall mounted LED light of capacity 9W including LED bulb as per sample and all electrical connection completed all as specified. Make :-Halonix Cat Part-HLWB-01-B22 or equivalent in Havells/Philips

Supply and fixing in replacement of Flexible LED strip light 30W, 5 mtr long , cool/warm white , incl LED driver and making all electric connections complete all as directed. Make:-Halonix Cat Part No- HLFSL-01-30-CW or equivalent in the list

S & F in replacement of Energy efficient wall mounted LED Bulk Head luminaire 10W made of die cast Aluminium with Opal diffuser IP-65 complete all as specified and directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing area light pressure diecast aluminium roadway luminaire with high power LEDs and HF electronic driver complete with fixing on wall with nut, bolt, washar, clamps etc complete all as directed.

Supply and fixing in replacement of security light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of automatic hand dryer hot air dispenser with infrared sensor 5 star ratings metal body with all accessoried including electrical connections complete all as specified.

Supply and fixing in replacement of curved glass chimney for modular kitchen 5 Star rating, auto clean type of size 90cm, 1200 cum/hr suction capacity with high quality stainless steel baffle filter and touch control panel with digital display and LED lights to light up cooking area including making hole and fitting complete all asspecified and directed.

Material and labour in replacement of telephone Wiring with twin core PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in separate concealed PVC conduit complete all as specified and directed.

M&L in replacement of Modular Telephone socket Jack 01 Module size complete with modular sheet as per site requirement complete all as directed by the Engr-In-Charge.

Material and labour in replacement for earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as directed.

sunil traders

M/s Shubh Enterprises

imran construction company

Leo Network power systems

M/S Yamin