SPL REPAIR TO SINGLE OFFICER ACCN 02 ROOM SET WITH ATT TOILETS KITCHEN ETC PARKING AND STORE IN NCC OFFRS MESS BLDG NO P 45 OF NCC GP HQ AND CERTAIN REV AND MINOR WORKS AT MUZAFFARPUR IN AGE BR I UNDER GE DANAPUR CANTT

Amount

Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed

M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in lintel beams, cantilever, bressummers, lintels over 1.5 m clear span etc complete all as specified & directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over upto and including 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note : Liquid WPC will be measured and paid separately.

M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .

Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.

Demolition of cement concrete in ground floors and paving (un reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified and directed.

M & L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation as required complete all as specified and directed.

M&L for hard core of broken stone gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor Complete all as spesified and directed

M&L 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor Complete all as spesified and directed .

Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. Complete all as specified & directed

M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation,sub base of floor mass concrete & cinder concrete etc complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor etc Complete all as spesified and directed .

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Removing of old paints by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L Preparing old plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 3 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 3 mm thick wall care putty including preparation of new surface complete all as specified and directed

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on old surfaces complete all as specified and directed.

M&L for applying 3mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old ceiling including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by washing, rubbing down and scrapping of distemper surface and applying 3mm thick wall care putty on wall & concretesurface complete all as specified and directed

M&L for applying two coats of oil bound distemper of any light shade complete all as specified and directed.

M&L for two coats of white washing on old wall surfaces incl preperation of old sufraces complete all as specified & directed.

M&L for prepartion old plastered surface of ceiling and applying two coat of white wash complete all as specified & directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

~Ditto~ all as per item No 40.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bend/shoes any radius of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius With access door of 100 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius With access door of 75 mm dia complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per item No 46.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

S&F75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 including demolition existing cover complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets etc complete all as specified & directed.

S&F in position false ceilling comprising of grid system of Armstrong or equivalent for frame work with GI powder coated angle wall runners of size 19 mmX19 mm cross Tee of size 24mmX24mm and main tee of size 34mmX24mm at 60 cm c/c approx to form a grid of 600mmX600mm for designer false ceilling suspended form roof on main runners @ 0.90 mm c/c by means of suitable suspender (average 1.50 mtr length) 4 mm GI wire with adjustable cleats of hook including ceiling board of sound absorbing of size 60 x 60 cms, 9 mm thick of ARMSTRONG or any other make specified in Particular Specification coloured with perforations complete all as specified and directed.

M&L for wall lining of PVC hollow sheet 5-7 mm thick consisting of 20 mm MS hollow square tubes grid and fixed with screws complete all as specified and directed..

M&L for Roof Trusses (framed trussed purlins ,crane gantries , rails and fastenings and heavy brackets framing (beam tee, angle ,channel or flat sections) including distance piece ,cleats etc. complete all as specified and directed..

M&L Cutting holes into or through brick walls built in cement mortar/cement lime mortar superficial area n.exc. 150 Sq. cm and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as required complete all as specified & directed.

S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified & directed.

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc. set and joining in neat cement slurry and pointed in coloured cement to match with shade of tiles , including laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in dado/skirting etc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed

Ditto--- as per Srl itemNo 63.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed.

S&F anodized aluminium window three track sliding type with frames including 5mm thick tinted glass in two shutters and one sliding shutter with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with , aluminium beadings and joining cleat for fixing, standard rubber gasket, including aluminium guard bars and joining cleat for fixing including locking devices complete all as specified

S&F aluminium anodised door shutter side hung in single or double leaf with frames size 63 x 38 x 1.2 mm thick including 5.5 mm thick tinted glass in half portion and 9 mm thick prelaminated particle board exterior grade, one side with decorative choice and other side balancing white lamination, standard rubber gasket, powder coated aluminium beadings, disc type handles two Nos for each shutters and one mortice lock and joining cleat etc complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and diredted

S&F Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screw and washers, J-type,L-type or cranked hook in roofs, walls etc with grade of zinc coating 275 complete all as specified & directed

S&F in repairs vitreous china half stall urinal flat back (white) with grating, water spreader and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 6

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white including white seat cover ( excluding flushing cistern and flush pipe) complete all as specified & directed by Engr-in- Charge.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fixing in repair 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete in repair complete all as specified & directed.

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed.

S&F in repair Soap dish, stainless steel, approximate size 160x160x90mm and approved by EIC complete all as specified & directed

S&F in repair bib tap 15mm chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowka complete all as specified and directed

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed...

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F Aluminium handles, cast type, anodized 150 mm size complete ISI Marked complete all as specified and directed.

S & F Aluminium handles, cast type, anodized 100 mm size complete ISI Marked complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed.

S&F in repair 450mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed.

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specifiedand directed.

S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

S&F in repair chromium plated toilet paper holder with flap complete. complete all as specifiedand directed..

S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement 75 mm dia etc complete.

Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed

Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed

S & F 15 mm dia GI mild steel tube medium grade with all fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed.

S & F 20 mm dia GI mild steel tube medium grade with all fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S & F in repair 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on the wall to make PVC frame as per specification .

M&L for reinforced cement concrete 1:1.5:3 Type A1 using 20 mm graded aggregate in foundation, footing, foundation beams,plinth beams, bases for columns,pedestal, under reamed piles, mass concrete, etc complete.

M&L reinforced cement concrete 1:1.5:3 Type A1 20mm grared aggregate as in columns, pillars, posts, struts etc complete.

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

Forming 150mm deep x 12mm thick expansion joints filled with pre formed bituminous filler and 30mm primed and sealed with sealing compound Grade B complete.complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation over area n. exc 1.5m & n.exc 3 m in depth and getting out in any type of soil complete all as specified and directed.

Excavation over area exc 1.5m and n exc 3m depth in depth and getting out in any type of soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

M&L for RCC type B1 1:2:4 (20 mm graded aggregate) as in in slab supported on walls, beams and columns in floor, roofs landings, balconies, canopies, deck slabs and in shelves and the like complete. complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M&L cement concrete type B-1 1:2:4 (20mm graded aggregate) as in coping . complete all as specitied and directed

M&L for laying 200mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 for 200mm dia pipe complete all as specified and directed.

M & L for loose filling of broken brick bats of gauge 40 to 80 mm as in soakage pits, soakage wells complete all as specified and directed.

M&L for using sub class 'B' bricks old size, laid flat, dry as in flooring complete all as specified & directed..

M&L Cement concrete 1:3:6 Type C2, 100 mm thick (40 mm graded aggregate) as in sub base floor finished even & fair complete all as specified and directed

S&F in repair plastic water closet seat, cream/white colour, closed pattern with flat bottom and cover and mild steel chroimum plated aluminium hinging device for pedestral pattern WC

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:-

One light/fan point controlled by one switch complete all as specified & directed

One bell point controlled by one switch complete all as specified & directed

One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed.

One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.

~Ditto~ all as per Sch A Item No- 140.00 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed..

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F switch socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing multi music Bell, AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing bell push single pole, 6 amps, 230 Volts, flush type complete all as specified and as directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

S&F MCB SP of capacity 5 - 40 Amps 240 volts, 10 KA breaking capacity 'C' type incl connection complete all as specified & directed.

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make- Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/ CG.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

S&F recessed mounting fitting 1 x 42 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 42 watt lamp incl all accessories complete all as specified and as directed. Make, Havells Cat no - VENUSNEOHE2X2PLR18-42WLED857MOD , or equivalent Make of Philips / Bajaj / Crompton Greaves

M/L for provision of sub main wiring with two runs of single core PVC insulated unsheathed 6 Sqmm mutistranded copper conductor 1100 volts drawn in PVC conduit with incl PVC insulated unsheathed multistronded copper conductor 4 sqmm as earth continuity and connected of common earth dolly in and including 25 mm dia rigid PVC conduit all as specified& directed by Engr-in-Charge.

M&L for Galvanised iron strip (32x6)mm fixed with existing earth conductor or extension of earthing and down conductor above the ground level complete all as specified and directed. C

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

M/S Priya Trading Agency

M/S MODERN CONSTRUCTION

M/S SAROJ KUMAR SINGH

MS SHANTI AND SONS

SINHA CONSTRUCTION