Design, Fabrication and SITC of Motorized Sliding Trolley Gate including All Inclusive Comprehensive Maintenance Contract at Srinagar International Airport

Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening electrically operated motorized M. S. Sliding Trolley Gate having length of approx. 130 Meters and height of 2.50 mtr. from Finished Floor Level (including Wheel Height & concertina wire) suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed Technical specifications, SCC and drawings etc. complete as required.

Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening electrically operated motorized M. S. Sliding Trolley Gate having length approx. 110 Meters (to be fabricated in two section and closing length of two sections with available space is maximum 60 Mtrs) and height of 2.50 mtr. from Finished Floor Level (including Wheel Height & concertina wire) suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed Technical specifications, SCC and drawings etc. complete as required.

Supply, fabrication, Installation, testing & Commissioning of Wiremesh of size 25mm x 25mm on 3mm dia wire with 25mm X 25mm X 3mm M.S. hollow section /Angle frame in vertical and cross sections frames throughout the above M.S Sliding Trolley Gate as per enclosed technical specifications, SCC and drawings etc. Including painting with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer etc. complete as required.

Supply, Installation, Testing & Commissioning of suitable size (not exceeding 300mm) M. S. wheels set( 2 nos. wheels per set) with robust shaft and blocks for less noise operation along with pillow block bearing units of reputed make and all associated accessories, works and painting etc. complete as required.

Supply & Fixing MS angle of size 50mm X 50mm X 6mm in MS U channel of size 100mm X 50mm X 5mm including fixing of track on existing surface & making good as per site requirement complete etc. as required.

Supply, Installation, Testing and Commissioning of suitable dead end barrier at the end of track of trolley gate with MS channel of size, 100mm X 50mm X 5mm and cross arm of angle iron of size 45mm x 45mm with thickness of 4mm i/c welding etc. as required as per design / drawing.

Design, Supply, Installation, Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of electrically operated motorized sliding trolley gate of length 130 Mtrs. The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc. as required. Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) ‐ 2 nos. for remote operation complete etc. as required. Also supply and fixing radium reflector on GATE written as "STOP" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item .

Design, Supply, Installation , Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of electrically operated motorized sliding trolley gate of length 110 Mtrs (60 Mtrs + 50 Mtrs). The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc. as required. Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) ‐ 2 nos. for remote operation complete etc. as required. Also supply and fixing radium reflector on GATE written as "STOP" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item .

Design, SITC of Cable tray system as for 130m long trolley gate as per site requirement.