GE 861 EWS-48/2022-2023

Amount

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black) and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-1 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-1 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per serial item No 1 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

Switch piano flush button types 6 Amp, single pole, one way complete all as specified and directed.

Socket outlet, 3 pin, 6 Amps flush type, complete all as specified and directed.

Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal, complete all as specified and directed.

Modular one way switch 6 Amp, 1 module, complete all as specified and directed.

Modular one way switch 16A, 1 module, complete all as specified & directed.

Modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed.

Modular socket outlet, 6A/16A-2/3 pin combined 2 module, 230 volts complete all as specified & directed.

Modular fan step regulator, 120W - 2 module, complete all as specified & directed.

Modular white cover plate with frame, 3 module, complete all as specified and directed.

Modular white cover plate with frame, 4 module, complete all as specified and directed.

Modular white cover plate with frame, 6 module, complete all as specified and directed.

Modular white cover plate with frame, 8 module, complete all as specified and directed.

Stepped type electronic fan regulator flush type, AC 230 volts, duly ISI marked including connector on the existing sheet etc. as reqd., complete all as specified and directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed.

12 watt 220 volts AC round shape recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

15 watt 220 volts AC round shape recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

LED lamp 9 W, complete all as specified and directed..

Decorative ultra slim linear LED in replacement of 20 Watt , 4' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube, complete all as specified and directed.

LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

MCB distribution board , 415 volts TPN, double door vertical type, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections, complete all as specified and directed.

MCB, SPN, AC, 240 volts "B" series capacity of 32 to 40 Amps, 10kA and making connections, complete all as specified and directed.

MCCB 4 pole, 415 volts fixed type, 63 Amps with breaking capacity 16 KA (incomer in 'V' TPN DB) complete all as specified and directed.

Sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6.0 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6.0 sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked, complete all as required at site or directed.

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor (solid), served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10.0 sqmm, complete all as specified and directed.

Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material, complete all as specified and directed.

450mm sweep wall fan, high speed, 230 volts,AC single phase, 50 Hz with jerk free, oscillation, smooth running, three blades, pull cords including all fixing arrangement, complete all as specified and directed.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 10%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed.

Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying, complete all as specified and directed.

Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete (rounded or chamfered on edges), complete all as specified.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete (rounded or chamfered on edges), complete all as specified.

Steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole, complete all as specified and directed.

Dismantling of ACSR or AAC conductors, complete all as specified and directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m, complete all as specified and directed.

Dismantling insulators any type, any size, complete all as specified and directed.

M&L in repairs MCCB 4 pole, 415 volts fixed type, 63 Amps with breaking capacity 25 KA complete all as specified and directed.

M&L in repairs MCCB 4 pole, 415 volts fixed type, 100 Amps with breaking capacity 25 KA complete all as specified and directed.

M&L in repairs MCCB 4 pole, 415 volts fixed type, 160 Amps with breaking capacity 36 KA complete all as specified as directed.

M&L in repairs MCCB 4 pole, 415 volts fixed type, 200 Amps with breaking capacity 36 KA complete all as specified as directed.

M&L in repairs MCCB 4 pole, 415 volts fixed type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F in repair 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 10 sqmm nominal cross section 2.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed.

Description all as per item No. 56 above but cross sectional area 16 Sqmm 4.0 core complete all as specified and directed.

Description all as per item No. 56 above but cross sectional area 25 Sqmm 4.0 core complete all as specified and directed.

Description all as per item No. 56 above but cross sectional area 70 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 56 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x 95 Sqmm + 1 core x 70 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS: 14255 including identification of phase by Ridges provided on the insulation of Phase conductors: 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC for Tap from Bare lines) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed.

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x 70 Sqmm + 1 core x 50 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS: 14255 including identification of phase by Ridges provided on the insulation of Phase conductors: 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC for Tap from Bare lines) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 70 Sqmm to 95 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed.

Supply and laying in repairs 80mm dia GI tubing light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed.

Supply and laying in repairs 40mm dia GI tubing light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed.

1100 volts grade copper conductor cable single core 2.50 sqmm, complete all as specified & directed.

1100 volts grade weather proof flat twin core cable with aluminium stranded of 4 sqmm nominal cross section in service connection, complete all as specified and directed.

Street light junction/pole box of size 260mm x 210mm x 120mm ABS 4 Nos aluminium bus bar strip 25x3mm over protection insulators including suitable nuts, bolts and washers for fixing at pole/wall/CGI sheet etc. including gland for incoming and outgoing cable and 01 No MCB SP 6 Amps all as required at site, complete all as specified and directed.

Street light junction box of size 260mm x 210mm x 120mm made of MS Sheet 1.6mm thick, front door openable with fixing screw, painted with two coats of synthetic enamel powder coated paint over a coat of red oxide primer including aluminium bus bar 4 Nos of size 20mmx3mm mounted on epoxy based post insulators and drilled holes for cable connection including 01 Nos MCB SP 6 Amps-1 No incl magnetic lock system all as required and fixed to poles using MS strip of size 20mmx3mm with suitable size nuts, bolts & washers all as required at site, complete all as specified and directed.

Supply and fixing in repair hot water plant's GI body horizontal type plant of cap 100000 kcal/hr Each fixing the same to its original position at site, welding and brazing work if required including disconnecting and refexing of water pipe lines from water, electrical panel and its connections, exhaust pipe and replace oil pipe, oil filter, oil pump, air vent, ball valve, nozel and complete D scaling, complete all as specified and directed.

Supply and fixing in repair suitable for 100000 kcal/hr cap hot water plant horizontal type including dismentalling old ignition rod, photo cell, glass wool, welding and brazing work if required also include in coated rate, complete all as specified and directed.

Supply and fixing in replacement suitable for 100000 kcal/hr cap hot water plant heating blade/coil including welding and brazing work if required, complete all as specified and directed.

Supply and fixing in replacement suitable for 100000 kcal/hr cap hot water plant sequence controller including welding and brazing work if required, complete all as specified and directed.

Supply and fixing in replacement temprature gauge for hot water plant temprature reading rating 0 to 100 degree celcious, complete all as specified and directed.

Supply and fixing in replacement of burner assembly of hot water plant of capacity 100000 Kcal/Hrs complete with all accessories, complete all as specified and directed.

Supply, fabrication, installation, testing & commissioning of LT Panel board, outdoor type of minimum size 60cm x45cm x 60cm, dust and vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 65mm x 65mm x 5mm iron angle frame of height 45cm from PCC bedding, factory assembled compartmentalized construction, free standing typeincluding 3 phase and neutral 200 amps current carring capacity copper bus bar with eposy insulated coating with colour coade and insulated support, cable galleries inter-connecting bus bar connection/linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete, including making connection of cables of incoming and outgoing with thimbles/lugs, accessories as below and mounting the panel on ground floor with PCC foundation 1:3:6 upto height of 45cm above ground level, complete all as directed and suitable to accommodate the following switch gears and meters:- (a) MCCB 63 Amps 4 pole, 35 KA, 415 V - 1 No (Incomer) (b) MCCB 40 Amps 4 pole, 35 KA, 415 V - 3 No (Out going) (c) MCB SPN 32 Amps, 230 V- 2 No. (d) Volt meter , digital type ,0 - 500V - 1 Nos. (e) Ammeter, digital type with suitable size CT's - 1 No (f) LED indication lamps (R,Y,B) LED type - 1 set

Supply, fabrication, installation, testing & commissioning of LT Panel board, outdoor type of minimum size 60cm x45cm x 60cm, dust and vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 65mm x 65mm x 5mm iron angle frame of height 45cm from PCC bedding, factory assembled compartmentalized construction, free standing typeincluding 3 phase and neutral 200 amps current carring capacity copper bus bar with eposy insulated coating with colour coade and insulated support, cable galleries inter-connecting bus bar connection/linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete, including making connection of cables of incoming and outgoing with thimbles/lugs, accessories as below and mounting the panel on ground floor with PCC foundation 1:3:6 upto height of 45cm above ground level, complete all as directed and suitable to accommodate the following switch gears and meters:- (a) MCCB 40 Amps 4 pole, 35 KA, 415 V - 1 No (Incomer) (b) MCCB 32 Amps 4 pole, 35 KA, 415 V- 2 No (Out going) (c) Volt meter , digital type ,0 - 500V - 1 Nos. (d) Ammeter, digital type with suitable size CT's - 1 No (e) LED indication lamps (R,Y,B) LED type - 1 set

Supply, installation, commissioning and testing of LT Outdoor type panel board (factory made Each of approved CPRI) not less than 150 cm x 100 cm x 60 cm mounted outdoor made out of Job CRCA sheet 3.15 mm thick dust proof, powder coated from both side, individual door, factory Jocking system with two side ventilation suitable for working on 415 volt AC supply including bus bar chamber and copper bus bar of capacity 1000 Amps rating for phase and neutral mounted on hygroscopic insulator fixed in a separate bus bar chamber separate compartment for incoming and outgoing feeder prewired with suitable size of copper conductor cable including fitted on 50x50x6mm angle iron channel with PCC foundation and provision of lugs and bushing for housing, complete all as directed and suitable to accommodate the following switch gears and meters:- (a) ACB 4P 630 Amps, 50 KA-01 Nos (Incomer) (b) MCCB 4P 400 Amps, 36 KA-02 No (Out going) (c) MCCB 4P 250 Amps, 36 KA-02 No. (Out going) (d) Multi functional digital Voltmeter and ampere meter including suitable and appropriate CTS 01 Set (e) LED indication lamps (R,Y,B) LED type - 1 set

Security light brackets with 1.50mtrs long 40mm dia galvanised iron pipe, medium grade with 100°-120° bend including arrangement for fixing at desired location with the help of flat iron clamps made of FI 40mmx5mm, nuts, bolts and washers including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

LED street light fitting 35 watt 230 V AC outdoor type with high pressure die-cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, complete all as specified and directed.

LED street light fitting 70 watt 230 V AC outdoor type with high pressure die-cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, complete all as specified and directed.

Earthing complete with galvanised cast iron earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 10%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Earthing complete with galvanised cast iron earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 25x4mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 25x4mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 10%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

FIRDOUS AHMAD BABA