CONTRACT FOR CONSTRUCTION OF NEW MONSOON PROTECTION SHED ABOVE SWAGAT RESTAURANT AND GUEST HOUSE IN KIHIM TOWNSHIP AT RCF THAL

PROVIDING STRUCTURAL STEEL WORK IN HOLLOW SECTION OF VARIOUS THICKNESS AND SIZES IN SQUARE, RECTANULAR AND ROUND SHAPE FROM 25MM TO 450MM SECTION AS PER DETAILED DESIGNS AND DRAWING OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION, MAKING RIVETED/BOLTED/ WELDED CONNECTIONS AND PAINTING COMPLETE.

PROVIDING AND FABRICATING STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE JOISTS, CHANNELS, ANGLES, TEES, PLATES ETC. AS PER DETAILED DESIGN AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION MAKING RIVETED / BOLTED /WELDED CONNECTIONS WITHOUT CONNECTING PLATES, BRACES ETC. AND INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER EPOXY PAINTING OF APPROVED QUALITY ETC. COMPLETE.

PROVIDING AND LAYING CAST IN SITU/READY MIX CEMENT CONCRETE M-20 OF TRAP / GRANITE/QUARTZITE/ GNEISS METAL FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT AND FOOTINGS AS PER DETAILED DRAWING OR AS DIRECTED INCLUDING LEAKPROOF FORMWORK, COVER BLOCKS LAYING/PUMPING, COMPACTION, CURING ETC. COMPLETE. MINIMUM CEMENT CONTENT CONSIDERED IN THIS ITEM IS 375KG/CUM. THE RATE SHALL INCLUDE COST OF ALL SPECIFIED MATERIALS AND OPERATIONS AT ALL LEVELS AND HEIGHTS, INCLUDING THE COST OF CENTERING, SHUTTERING BUT EXCLUDING REINFORCEMENT STEEL WHICH SHALL BE PAID UNDER RELEVANT ITEM.

PROVIDING AND FIXING STEEL BAR REINFORCEMENT (TMT FE 500 ISI MARKED STEEL) OF VARIOUS DIAMETERS (CONFORMING TO IS CODE) FOR R.C.C. FOOTINGS, FOUNDATIONS, SLABS, BEAMS, COLUMNS, STAIRCASE, NEWELS, CHAJJAS, LINTELS, PARDIS, COPINGS, ARCHES ETC. AS PER DETAILED DESIGNS, DRAWINGS AND SCHEDULES INCLUDING CUTTING, BENDING, HOOKING THE BARS BINDING WITH WIRES, COVER BLOCK SUPPORTING, TACK WELDING AS REQUIRED ETC. COMPLETE. NO EXTRA PAYMENT SHALL BE MADE FOR 18 SWG ANNEALED BINDING WIRES, CHAIRS.

PROVIDING AND LAYING “GP-2 (FOSROC) OR ANY OTHER APPROVED EQUIVALENT ANTI-SHRINKAGE GROUTING IN POCKETS/SLEEVES, UNDER BASE PLATES OF STRUCTURAL COLUMNS AS SPECIFIED IN THE DRAWING, DYNAMIC MACHINES SUCH AS SMALL PUMPS AND COMPRESSORS AS PER MANUFACTURER'S SPECIFICATIONS, COMPLETE IN ALL RESPECTS INCLUDING SHUTTERING AS PER DIRECTION OF ENGINEER-IN-CHARGE.

PROVIDING AT ALL HEIGHTS 12 MM THICK CEMENT PLASTER ON BRICK WORK, EXPOSED SURFACES OF RCC LINTELS, BEAMS, ETC., COMPLETE IN ALL RESPECTS AND AS DIRECTED WITH CEMENT PLASTER MIX : 1:4(1 CEMENT : 4 SAND), INCLUDING NECESSARY SCAFFOLDING, CURING ETC. COMPLETE.

SUPPLYING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA FOR ROOFING AND CLADDING AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE, GUTTERS ETC. PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 150 PAINT COATING : SUPER DURABLE POLYESTER(SDP) PAINTING / SILICON MODIFIED POLYESTER (SMP) PAINTING AS DIRECTED BY EIC PAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON SELF-DRILLING SELF-TAPPING SCREWS: HEX HEADED WITH EPDM/NEOPRENE WASHERS

SUPPLYING, FABRICATING AND FIXING IN POSITION M.S. HOLDING DOWN BOLTS ASSEMBLY CONSISTING OF BOLTS, HEADS, NUTS, WASHERS ETC., AND THE LIKE INCLUDING EMBEDDING IN CEMENT CONCRETE/R.C.C. WORKS AS PER APPROVED DRAWINGS COMPLETE IN ALL RESPECTS INCLUDING ONE CAT OF APPROVED QUALITY ANTI-CORROSIVE PAINT OVER A COAT OF APPROVED QUALITY PRIMER. (ALL MATERIALS SUPPLY ARE IN CONTRACTOR'S SCOPE.)

PERPERATION AND SUBMISSION OF SHED DRAWING FOR CONSTRUCTION INCLUDING FABRICATION DRAWINGS AND RCC PEDESTAL DESIGN, FOUNDATION BOLTS, GROUTING DETAILS SIZE OF STRCTURAL STEEL MEMBERS, QUANTITY ESTIMATION OF RCC PEDESTALS, REINFORCEMENT BOLTS, GROUTING, STRUCTURAL STEEL SECTIONS, SHEETING AND ANY OTHER AS PER APPROVED BY EIC AS PER RELEVANT IS STANDARDS & SUBMISSION OF DESIGN CALCULATIONS AND CHECKING DESIGN ADEQUACY WITH AVAILABLE DRAWINGS AND IN CONSULATATION WITH RCF. SUBMISSION OF STABILITY CERTIFICATION OF THE SHED, AS PER RCF PROFORMA AND SUBMISSION OF AS BUILD DRAWINGS AFTER COMPLETION OF CONSTRUCTION. 1. SHED ABOVE SWAGAT RESTAURANT 2. SHED ABOVE SWAGAT GUEST HOUSE

PROVIDING AND FIXING ONLY MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES MENTIONED ABOVE INCLUDING,STORAGE, TRANSPORTING, LOADING, UNLOADING AT SITE ETC. COMPLETE AS DIRECTED EIC AS PER REQUITREMENT OF JOB .(PAYMENT SHALL BE MADE ON BASIS OF ACTUAL COST OF MATERIAL PER CASH MEMO/ RECEIPT.). 10% EXTRA PAYABLE TO THE CONTRACTOR TO COVER PROFIT AND OVERHEAD.