PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME RANGRIAL, BLOCK BUDHLADA, DISTT. MANSA

Item Wise Description :

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km (a) Jalalabad Sand (Av. Lead 167 Km) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 167 km

(b) Gagger Sand (Av Lead 320 Km.) from Pathankot Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 320 km

(d) Bajri (Av Lead 320 Km.) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 320 km

(b) Filter Media (Av. Lead 320 Km) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 167 km

Scraping cement plaster CSR Item No. 8.31 (c)

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type. CSR Item No. 10.12 (ii)

Terracing consiting of tiles 22.86 x 11.43 x 3.83 cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. CSR Item No. 13.13

12.5mm thick cement plaster 1:2 CSR Item No. 15.7

Cement rendering on plaster 1mm thick CSR Item No. 15.48

Applying pink primer on aluminum priming coat on wood work including prepration of surface knotting and stopping. a) With Special Quality paint. CSR Item No. 16.17

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. a) With special quality paint. CSR Item No. 16.18

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position. (ii) 35 mm thick CSR Item No. 17.10 (iii)

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. (a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter CSR Item No. 18.24

115 mm thick brick on edge lining in herringbone bond/zig-zag or other specified pattern laid in 1:3 cement sand mortar over LDPE (b) In Bed CSR Item No. 19.32

Excavation by mechanical means (JCV) or Hydraulic excavator ) in trenches for pipe line with straight or open cutting in streets or open area including trimming and dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, cursing over trenches for access to the houses watching, fencing etc. and removed of surplus soil out side/inside the town involving lead unto 15 meter complete in all respects. (a) Earth work unto 1.5 mtr depth for (i) all classes of soil except rocky CSR Item No. 28.2

Providing, Laying, fixing & jointing of P.V.C Pipes as per ISI-4985 (ISI Marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradlents, cutting, jointing and testing complete as per specifications. Including specials and excavation minimum cover 1 mtr (6kg/cm2 pressure) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2

90 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2

Supplying and laying C.I. Specials as per IS: 1538 complete as desired by Engineer- in- charge conforming to ISI specifications. Note:- if CI specials of ISI marked is used instead of specials. (a) C.I specials upto 300mm i/d CSR Item No. 28.24

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410 ) and Bronze ( gunmeted) working parts Sluice Valves ISI marked 14846-2000, including, jointing, testing & cost of Nut, Bolt & insertion sheet all carriage complete ( with the approval of Engineer-in-Charge). CSR Item No. 28.27 A (a) 80mm i/d Sluice Valves

150mm i/d Sluice Valves CSR Item No. 28.27 A

Providing and placing in horizontal layers filtering mei/d screened, washed and cleaned as described below (a) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. CSR Item No. 28.51

Providing, Lowering, jointing and cutting of Plain and Reinforced Cement Concrete spigot and socketed Pipes and Specials with rubber ring ISI marked as per IS code IS 458-2003 into Trenches for all Depths and Laying out the same to correct alignment, gradients, levels etc. including all dressing and trimming and cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and to ensure this, they shall be grouted in where necessary including jointing the socketed pipe with cement sand mortar 1:1 after stretching and fixing of rubber ring, facing, troweling and finishing the joints at an angle of 45 degree, keeping the joint covered and wetted till the same are cured, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. (i) RCC Pipes s/s class NP-2 (c) 200 mm i/d pipes CSR Item No. 28.69

Non Schedule Items Supplying and fixing 150mm i/d Galvanized iron sheet floating arm 5.20 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel. Complete in all respect.

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (A) Top Layer :-- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00)

(B) Second Layer :-- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm

(C) Third Layer :-- Bajri screened, cleaned and washed and graded from 6mm to 20mm

(D) Fourth Layer :--- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm

(F) Bottom Layer :-- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm

Non Schedule Item Providing, installing, testing & commissioning of 1 No. electrically centrifugal driven Raw water pump set capable of delivering 600 LPM against a head of 13 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch,Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc including cost of Electronic over current relay complete in all respects. (I) Raw water motor Minimum BHP 5.00 ( Motor with Pump) Discharge 600 LPM. Head 13 Mtr

(ii) Panel Board

Non Schedule Item Providing, installing, testing & commissioning of 1 No. electrically centrifugal driven Clear water pump set capable of delivering 600 LPM against a head of 38 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch,Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc including cost of Electronic over current relay complete in all respects. (i) Clear water motor Minimum BHP 10.00 ( Motor with Pump) Discharge 600 LPM. Head 38 Mtr

(ii) Panel Board

Non Schedule Item Providing, installing, testing & Commissioning one no. Electronically acturated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Litres of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications.

Non Schedule Item Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule midium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Copplings, GI hooks etc., cutting, threading, making hole in wall and testing in treanches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. Water Connection on Old pipe line

Non Schedule Item Water Connection on New pipe line

Non Schedule Item Repair of old water connection

Non Schedule Item Provision for internal wiring for machinery with PVC insulated copper wire in PVC pipe

Non Schedule Item Painting of Sign Board

(N.S. Rates) (-) Credit of old material for floating arm

(N.S. Rates) (-) Credit of old Sluice Valve of size 150mm i/d

(N.S. Rates) (-) Credit of old Sluice Valve of size 80mm i/d

(N.S. Rates) (-) Credit of old Raw water motor of capacity 5 BHP

(N.S. Rates) (-) Credit of old Clear water motor of capacity 10 BHP

(N.S. Rates) (-) Credit of old panel board for Raw water motor of capacity 5 BHP

(N.S. Rates) (-) Credit of old panel board for Clear water motor of capacity 10 BHP